180 likes | 268 Views
006-i. CHAPTER. -Wy: Dynamic derivation. 1:7. W+200mm. Radius 150mm. Aluminium tape. Wye. 3.000mm. Cover bottom. Cover top. 1. D raw the template of the cover bottom and cut toward “EXTERNAL”. Cover top. Wye. 3.000mm. Cover bottom. 2.
E N D
006-i CHAPTER -Wy: Dynamic derivation
1:7 W+200mm Radius 150mm Aluminium tape Wye 3.000mm Cover bottom Cover top 1 • Draw the template of the cover bottom and cut toward “EXTERNAL”.
Cover top Wye 3.000mm Cover bottom 2 • Copy the template and to cut on the contrary: toward the “INTERIOR”.
Wye =3.000mm 3 • Cut the walls and make the female before of to glue.
Wye Bent Aluminium tape 4 • Detail of the internal deflector.
Wye Glue 5 • Glue all the sides cut at 45º
Aluminium tape Wye Exterior face 6 • Unite the four sides with aluminum tape for the exterior.
Wye Interior face 7 • Rotate the duct in position with the interior face up.
Wye 2 1 8 • Close the piece follow the order.
Wye Internal deflector 3 9 • Place the wall of the deflector.
Position internal deflector Internal deflector Wye 4 10 • Adapt the internal deflector in the correct position.
Wye 5 11 • Place the external wall of the elbow part.
Wye Glue Triangle clips panel Aluminium tape 12 • Finish off of the internal deflector.
Wye 6 13 • Place the internal wall of the elbow part.
Pressing Aluminium tape Silicon inside Wye 14 • To press, to tape, to clip and to make the male.
Wye 3.000mm • Samples of application: wye of “SHORT ENTRANCE” (1)
Wye 3.000mm • Samples of application: wye of “LONG ENTRANCE” (1)
Wye 3.000mm • Samples of application: wye of “LONG ENTRANCE” (2)