1 / 10

CEREC Connect 3.65

CEREC Connect 3.65. Optical Impression. Buccal – The method of taking the optical impression of the preparation and antagonist has not changed. But instead of taking a partial bite we now take the optical impression of the buccal.

reese-byers
Download Presentation

CEREC Connect 3.65

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CEREC Connect3.65

  2. Optical Impression Buccal – The method of taking the optical impression of the preparation and antagonist has not changed. But instead of taking a partial bite we now take the optical impression of the buccal.

  3. One shot from the buccal is usually sufficient enough but in some cases it can be helpful to add an additional buccal picture. The following graphics show how the camera must be orientated when taking the buccal shots.

  4. Optical Impression Please note: You can take the buccal shot in the posterior or in the anterior. You must only ensure that this area is captured in the preparation and antagonist as well. It is also helpful but not necessary if you take a ‘rolling shot’ in the area of the preparation and antagonist where you want to take the buccal images. After taking the optical impressions of the preparation, the antagonist and the buccal click the ‘Next’ icon.

  5. Manual Correlation You can rotate both preparation and antagonist at the same time around one axis by clicking the left mouse button, holding and moving somewhere on the blue area. By clicking the left mouse button, holding and moving directly on the preparation or antagonist you can rotate each model individually. In the first step you see the 3D models of the preparation, the antagonist and the buccal. The buccal model is placed in the middle between preparation and antagonist.

  6. Manual Correlation Rotate both models preparation and antagonist in the way that you can see the matching parts between the buccal model and the preparation/antagonist model. Click and hold the buccal model and move it over the corresponding area on the preparation and drop it. The buccal model will be correlated to the preparation model automatically. If the correlation was successful the bucal model matches at the regarding position and you see the “leopard” pattern. If the correlation was not successful, the buccal model shakes for a moment and stays in the middle between the models. In this case redo this procedure and try to find a better matching area when doing the ‘Drag&Drop’ or add an additional buccal shot to enlarge the buccal model.

  7. Manual Correlation Now click and hold on the buccal model again and move it over the corresponding area of the antagonist and drop it. The buccal model (connected with the preparation model) will be correlated to the antagonist model automatically. If the correlation was successful the bucal model matches and you see the “leopard” pattern. If the correlation was not successful, the buccal model shakes for a moment. In this case redo this procedure and try to find a better matching area when doing the ‘Drag&Drop’ or add an additional buccal shot to enlarge the buccal model.

  8. Manual Correlation Please note: Depending on the quadrant where you have taken the buccal image it can happen that the buccal model seems to be rotated upside down. In this case simply click on the top spot of the buccal model and move it to the model that is underneath. The buccal model automatically rotates and you can use the above described ‘Drag&Drop’ technique. Also if you click on a lower spot of the buccal model and move it to the model that is on top the buccal model it will automatically rotate and you can use the ‘Drag&Drop’ technique.

  9. Toggle contacts The button ‘Toggle contacts’ provides a tool that shows the occlusal contacts. The color range is the same as in CEREC:

  10. Settling After the successful correlation of the models click the ‘Next’ icon and proceed as in the previous Connect software versions. The button ‘Settling’ provides a tool that works similar to the ‘Crown Settling’-Tool in the CEREC software. The settling features optimizes the final contact situation by translation and rotation the models against each other. After using this tool you can toggle between the situation before and after the settling by clicking the ‘Settling’ button.

More Related