1 / 48

Towards energy efficient Internet Service Providers – ECOnet Perspective

Towards energy efficient Internet Service Providers – ECOnet Perspective. Constantinos Vassilakis cvassilakis@grnet.gr Greek Research and Technology Network. Outline. The ECONET Project Energy consumption and energy efficiency demand

reina
Download Presentation

Towards energy efficient Internet Service Providers – ECOnet Perspective

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Towards energy efficient Internet Service Providers – ECOnet Perspective ConstantinosVassilakis cvassilakis@grnet.gr Greek Research and Technology Network GN3 Green Networking: Advances in Environmental Policy and Practice

  2. Outline • The ECONET Project • Energy consumption and energy efficiency demand • Decomposing the Energy Consumption in the Wired Network • A Taxonomy of Undertaken Approaches • ECONET approach • Potential Impact on the Wired Network GN3 Green Networking: Advances in Environmental Policy and Practice

  3. The ECONET project • Increasing the energy efficiency and the sustainable growth of our world is a global process where Telecommunications technologies (and the ICTs in general) play a key role. • But to obtain optimum results the process should involve the “two faces of the same coin”: • Green ICT – reducing the carbon footprint of ICT • ICT for Green – using ICT for reducing third party-wastes. • ECONET is dealing with the first aspect • Focused on short and medium time exploitation GN3 Green Networking: Advances in Environmental Policy and Practice

  4. The ECONET project Manufacturers The Consortium Operators Academic /research centers Small/Medium Enterprises (SMEs) GN3 Green Networking: Advances in Environmental Policy and Practice

  5. The ECONET project • Goals: re-thinking and re-designing network equipment towards more energy-sustainable and eco-friendly technologies and perspectives. • The overall idea is to introduce novel green network-specific paradigms and concepts enabling the reduction of energy requirements of wired network equipment by 50% in the short/mid-term (and by 80% in the long run) with respect to the business-as-usual scenario. • To this end, the main challenge is to design, develop and test novel technologies, integrated control criteria and mechanisms for network equipment allowing energy saving by dynamically adapting the device capacities and consumptions to current traffic loads and user requirements. GN3 Green Networking: Advances in Environmental Policy and Practice

  6. Energy consumption and energy efficiency demand • There are two main motivations that drive the quest for “green” ICT: • the environmental one, which is related to the reduction of wastes, in order to impact on CO2 emission; • the economical one, which stems from the reduction of operating costs (OPEX) of ICT services. How muchis 2% of CO2? Gartner Group, Inc. (2007) “The global information and communications technology (ICT) industry accounts for approximately 2% of global carbon dioxide (CO2) emissions, a figure equivalent to aviation.” Note that the ICT sector raises much faster than aviation GN3 Green Networking: Advances in Environmental Policy and Practice

  7. Energy consumption and energy efficiency demand The figures refer to the whole corporate consumption. As such, they account for numerous sources, other than the operational absorption of the networking equipment (e.g., offices’ heating and lights). Notwithstanding, they give an idea of the general trend. GN3 Green Networking: Advances in Environmental Policy and Practice

  8. Energy consumption and energy efficiency demand Source: C. Bianco, F. Cucchietti, G. Griffa, ” Energy consumption trends in the Next Generation Access Network - a Telco perspective, ” IEEE INTELEC 2007. Electrical energy consumption evolution and future trends for TELIT’s fixed network. Source: Telecom Italia GN3 Green Networking: Advances in Environmental Policy and Practice

  9. Decomposing the Energy ConsumptionThe Wired Network Typical access, metro and core device density and energy requirements in today’s typical networks deployed by telcos, and ensuing overall energy requirements of access and metro/core networks. Source: R. Bolla, R. Bruschi, F. Davoli, F. Cucchietti, “Energy Efficiency in the Future Internet: A Survey of Existing Approaches and Trends in Energy-Aware Fixed Network Infrastructures,” IEEE Communications Surveys & Tutorials,vol. 13, no. 2, pp. 223-244, 2nd Qr. 2011. GN3 Green Networking: Advances in Environmental Policy and Practice

  10. Decomposing the Energy ConsumptionHigh-end Routers Estimate of power consumption sources in a generic platform of high-end IP router. Source: R. Tucker, “Will optical replace electronic packet switching?”, SPIE Newsroom, 2007. GN3 Green Networking: Advances in Environmental Policy and Practice

  11. Decomposing the Energy Consumption Is the energy consumption currently load-dependent? Daily traffic profile of core GRNET network router (peering with GEANT) Power consumption in GRNET core routers (24-hour period) Network engineers only speak about the capacity of a device or of a link interface… …as a matteroffact, device and link are specifically designed to work at the maximum speed… Source: The ECONET Consortium, ”End-user requirements, technology specifications and benchmarking methodologies,” Deliverable 2.1. GN3 Green Networking: Advances in Environmental Policy and Practice

  12. Decomposing the Energy Consumption Is the energy consumption currently load-dependent? • There is no significant difference in power consumption whether a port is running at 10 Mbps or 100 Mbps. • The switch power consumption is increased by connecting a new link, even if there is no data being transmitted on this link. • The difference in power consumption is quite low when a 1 Gbps link is fully utilized compared to when it is zero utilized. Power Consumption of Cisco Catalyst 2970 Switch • Source: K. Christensen, P. Reviriego, B. Nordman, M. Bennett, M. Mostowfi, J.A. Maestro, "IEEE 802.3az: the road to energy efficient ethernet," IEEE Communications Magazine, vol.48, no.11, pp.50-56, November 2010. GN3 Green Networking: Advances in Environmental Policy and Practice

  13. Decomposing the Energy Consumption Day & Night Traffic Profiles Percentagew.r.t. peak level.The profiles exhibit regular, daily cyclical traffic patterns with Internet traffic dropping at night and growing during the day. Traffic load fluctuation at peering links for about 40 ISPs from USA and Europe Source: http://asert.arbornetworks.com/2009/08/what-europeans-do-at-night/ GN3 Green Networking: Advances in Environmental Policy and Practice

  14. Decomposing the Energy Consumption Energy wastes • Networks and devices are lightly utilized. • Often peak loads during rush hours are generally much lower than capacities of links and devices. • It is well known that the «overdimensioning» is the best design strategy for assuring QoS levels… • Moreover, traffic loads follow well-known day & night fluctuations. • On the other hand, the energy requirements of network devices remain substantially flat according to their workload. • Furthermore, networks are highly overprovisioned /redundant to assure service availability. GN3 Green Networking: Advances in Environmental Policy and Practice

  15. A Taxonomy of Undertaken Approaches The largest part of undertaken approaches regarding engineered improvements is funded on few base concepts, which have been generally inspired by energy-saving mechanisms and power management criteria that are already partially available in computing systems. Source: R. Bolla, R. Bruschi, F. Davoli, F. Cucchietti, “Energy Efficiency in the Future Internet: A Survey of Existing Approaches and Trends in Energy-Aware Fixed Network Infrastructures,” IEEE Communications Surveys & Tutorials,vol. 13, no. 2, pp. 223-244, 2nd Qr. 2011. GN3 Green Networking: Advances in Environmental Policy and Practice

  16. A Taxonomy of Undertaken Approaches Re-engineering • Re-engineering approaches aim at: • introducing and designing more energy-efficient elements for network device architectures • suitably dimensioning and optimizing the internal organization of devices • reducing their intrinsic complexity levels. GN3 Green Networking: Advances in Environmental Policy and Practice

  17. A Taxonomy of Undertaken Approaches Dynamic Adaptation • The dynamic adaptation of network/device resources is designed to modulate capacities of packet processing engines and of network interfaces, to meet actual traffic loads and requirements. • This can be performed by using two power-aware capabilities, namely, dynamic voltage scaling and idle logic, which both allow the dynamic trade-off between packet service performance and power consumption. GN3 Green Networking: Advances in Environmental Policy and Practice

  18. A Taxonomy of Undertaken Approaches Dynamic Adaptation Standard operations Wakeup and sleeping times Idle logic Increased service times Power scaling Idle + power scaling Wakeup and sleeping + increased service times GN3 Green Networking: Advances in Environmental Policy and Practice

  19. A Taxonomy of Undertaken Approaches Dynamic Adaptation: Green Ethernet (IEEE 802.3 az) First version: Adaptive Link Rate proposed by Christensen and Nordman Final Version: based on the “low power idle” concept, proposed by Intel. 15 Idea: transmit data at the maximum speed, and put the link to sleep when it is idle. LPI can possibly be asynchronous 10 Power(W) 5 0 10 100 1000 10000 Link speed (Mb/sec) • Tw and Ts for 10 Gb/s in IEEE Std 802.3az-2010 are 4.48 μs and 2.88 μs, respectively GN3 Green Networking: Advances in Environmental Policy and Practice

  20. A Taxonomy of Undertaken Approaches Dynamic Adaptation: SW routers & ACPI • In PC-based devices, the Advanced Configuration and Power Interface (ACPI) provides a standardized interface between the hardware and the software layers. • ACPI introduces two power saving mechanisms, which can be individually employed and tuned for each core: • Power States (C-states) • C0is the active power state • C1through Cn are processor sleeping or idle states (where the processor consumes less power and dissipates less heat). • Performance States (P-states) • while in the C0 state, ACPI allows the performance of the core to be tuned through P-state transitions.P-states allow to modify the operating energy point of a processor/core by altering the working frequency and/or voltage, or throttling the clock. GN3 Green Networking: Advances in Environmental Policy and Practice

  21. A Taxonomy of Undertaken Approaches Dynamic Adaptation: SW routers & ACPI [MHz] Source: R. Bolla, R. Bruschi, A. Ranieri, “Green Support for PC-based Software Router: Performance Evaluation and Modeling”, Proc. IEEE ICC 2009, Dresden, Germany, June 2009. Best Paper Award. GN3 Green Networking: Advances in Environmental Policy and Practice

  22. A Taxonomy of Undertaken Approaches Sleeping/Standby • Sleeping/standby approaches are used to smartly and selectively drive unused network/device portions to low standby modes, and to wake them up only if necessary. • However, • since today’s networks and related services and applications are designed to be continuously and always available, • standby modes have to be explicitly supported with special techniques able to maintain the “network presence” of sleeping nodes/components. GN3 Green Networking: Advances in Environmental Policy and Practice

  23. A Taxonomy of Undertaken Approaches Sleeping/Standby: Proxying the Network Presence • Scenario: networkedhosts(PCs, consumer electronics, etc.); • Problem: whenanend-hostenters standby mode, itfreezesall network services, and itisnotabletomaintainits network presence; • Idea: introduce a Network Connection Proxy (NCP), whichisdevotedtomaintain the network presenceof sleeping hosts. Source: M. Allman, K. Christensen, B. Nordman, V. Paxson, “Enabling an Energy-Efficient Future Internet Through Selectively Connected End Systems,” Proc. ACM SIGCOMM HotNets, Atlanta, GA, Nov. 2007. I wanttosleep Zzzzz… Wakeup/sleep messages Continuous and full connectivity Application-specificmessages Sleeping host NCP Internet GN3 Green Networking: Advances in Environmental Policy and Practice

  24. A Taxonomy of Undertaken Approaches Sleeping/Standby: Proxying the Network Presence • Scenario: CoreNetworks • Idea: put links, interfaces and part ofnodes (e.g., line-cards) tosleep • Problem: Network stability, convergencetimes at multiple levels (e.g., MPLS trafficengineering + IP routing) Source: R. Bolla, R. Bruschi, A. Cianfrani, M. Listanti, “PuttingBackboneNetworkstoSleep,” IEEE Network Magazine, SpecialIssue on “Green Networking”, vol. 25, no. 2, pp. 26-31, March/April 2011. GN3 Green Networking: Advances in Environmental Policy and Practice

  25. A Taxonomy of Undertaken Approaches Sleeping/Standby: Proxying the Network Presence • Solution: they exploited two features already present in today’s networks and devices: • network resource virtualization • modular architecture of network nodes. • This approach allows to: • Put physical resources to sleep (e.g., links, linecards, etc.); • Move the logical entities working on physical elements going to sleep, to other physical elements on the device. • If suitable L2 protocols are used, the complexity of standby management can be hidden from the IP layer, and totally managed inside traffic engineering procedures. GN3 Green Networking: Advances in Environmental Policy and Practice

  26. A Taxonomy of Undertaken Approaches Green network-wide control: Traffic engineering & routing Performance scaling • Standby states have usually much lower energy requirements than active states. • Network-wide control strategies (i.e., routing and traffic engineering) give the possibility of moving traffic load among network nodes. • When a network is under-utilized, we can move network load on few “active” nodes, and put all the other ones in standby. • Different network nodes can have heterogeneous energy capabilities and profiles. • Recent studies, obtained with real data from Telcos (topologies and traffic volumes) suggested that network-wide control strategies could cut the overall energy consumption by more than 23%. Standby state Power Consumption Energy-aware state GN3 Green Networking: Advances in Environmental Policy and Practice

  27. A Taxonomy of Undertaken Approaches Green network-wide control: Traffic engineering & routing Only local control policies Local + network-wide control policies Once network devices will include energy management primitives, further energy reduction will be possible by moving traffic flows among the network nodes, in order to minimize the energy consumption of the entire infrastructure. GN3 Green Networking: Advances in Environmental Policy and Practice

  28. The ECONET approach GN3 Green Networking: Advances in Environmental Policy and Practice

  29. The ECONET approach GN3 Green Networking: Advances in Environmental Policy and Practice

  30. The ECONET approach GN3 Green Networking: Advances in Environmental Policy and Practice

  31. The ECONET approach Green AbstractionLayer GN3 Green Networking: Advances in Environmental Policy and Practice

  32. The ECONET approach ECONET Test Bench @ TELIT Test Plant GN3 Green Networking: Advances in Environmental Policy and Practice

  33. Potential Impact on the Wired Network • The previouslymentioned green technologiesallowdesigningnew-generation network devicescharacterizedby “energyprofiles” Reference: R. Bolla, R. Bruschi, A. Carrega, F. Davoli, D. Suino, C. Vassilakis, A. Zafeiropoulos, “Cutting the Energy Bills of Internet Service Providers and Telecoms through Power Management: an Impact Analysis”, Elsevier Computer Networks, Special Issue on “Green Communication Networks”, to appear GN3 Green Networking: Advances in Environmental Policy and Practice

  34. Potential Impact on the Wired NetworkTELIT reference scenario 2015-2020 network forecast: device density and energy requirements (example based on Italian network) Sources: 1) BroadBand Code of Conduct V.3 (EC-JRC) and “inertial” technology improvements to 2015-2020 (home and access cons.) 2) Telecom Italia measurements and evaluations (power consumption of metro/core network and number of devices) Network load statistics and topology data target Home/Access Metro/Transport/Core Sources: BroadBand Code of Conduct V.3 (EC-JRC) and technology improvements to 2015-2020. Device internal sources of energy consumption Source: forecast based on: carrier grade topologies; traffic analysis and indicators (ETSI TR 102530, ODYSSEE) and projected traffic load. Sources: Information from vendors. GN3 Green Networking: Advances in Environmental Policy and Practice

  35. Potential Impact on the Wired NetworkTELIT network topology and traffic profiles GN3 Green Networking: Advances in Environmental Policy and Practice

  36. Potential Impact on the Wired NetworkIs There Room for Energy Saving Optimization? Yearly Energy consumption estimation for TELIT Home/access Metro/Transport Core Room for Energy Saving Optimization GN3 Green Networking: Advances in Environmental Policy and Practice

  37. Potential Impact on the Wired NetworkEnergy consumption model outline Source: R. Bolla, R. Bruschi, A. Carrega, F. Davoli, D. Suino, C. Vassilakis, A. Zafeiropoulos, “Cutting the Energy Bills of Internet Service Providers and Telecoms through Power Management: an Impact Analysis”, Elsevier Computer Networks, Special Issue on “Green Communication Networks”, to appear GN3 Green Networking: Advances in Environmental Policy and Practice

  38. Potential Impact on the Wired NetworkEstimated energy saving for the TELIT network DPS & Standby primitives We suppose standby capabilities to be applied only where “alternative paths” are present. DPS primitives only Standby primitives only GN3 Green Networking: Advances in Environmental Policy and Practice

  39. Potential Impact on the Wired NetworkThe GRNET network case Yearly Energy consumption estimation for GRNET GRNET network does not have Access/Home parts DPS & Standby primitives GN3 Green Networking: Advances in Environmental Policy and Practice

  40. Thank you for your attention! Questions? cvassilakis@grnet.gr http://econet-project.eu http://green.grnet.gr GN3 Green Networking: Advances in Environmental Policy and Practice

  41. Backup slides GN3 Green Networking: Advances in Environmental Policy and Practice

  42. Decomposing the Energy Consumption Access Technologies Power consumption of DSL, HFC, PON, FTTN, PtP, WiMAX, and UMTS as a function of access rate with an oversubscription rate of 20. The technology used is fixed at 2010 vintage for all access rates. Source: Baliga, J.; Ayre, R.; Hinton, K.; Tucker, R.S.; , "Energy consumption in wired and wireless access networks,"IEEE Communications Magazine,vol. 49, no. 6, pp. 70-77, June 2011. GN3 Green Networking: Advances in Environmental Policy and Practice

  43. A Taxonomy of Undertaken Approaches Re-engineering • Adoption of pure optical switching architectures: • They can potentially provide terabits of bandwidth at much lower power dissipation than current network devices. • But their widespread adoption is still hindered by technological challenges: problems mainly regard the limited number of ports and the feasibility of suitable buffering schemes. • Decreasing feature sizes in semiconductor technology have contributed to performance gains: • allowing higher clock frequencies • designing improvements such as increased parallelism. • the same technology trends have also allowed for a decrease in voltage that has reduced the power per byte transmitted by half every two years, as suggested by Dennard’s scaling law. GN3 Green Networking: Advances in Environmental Policy and Practice

  44. A Taxonomy of Undertaken Approaches Dynamic Adaptation: Understanding the Power-Performance Tradeoff Modeling and control • Recently a simple model has been proposed by Bolla et al, which is based on classical queueingtheoryandallows representing the trade-off between energy and network performance in the presence of both AR and LPI capabilities. • The model is aimed at describing the behaviour of packet processing engines. • It is based on a Mx/D/1/SET queueing system. TI TB Φ(t) τconf τon τoff Φa(Py) Φt(Cx) Φidle(Cx) TR t Source: R. Bolla, R. Bruschi, A. Carrega, F. Davoli, “Green Network Technologies and the Art of Trading-off,” Proc. IEEE INFOCOM 2011 Workshop on Green Communications and Networking, Shanghai, China, April 2001, pp. 301-306. GN3 Green Networking: Advances in Environmental Policy and Practice

  45. A Taxonomy of Undertaken Approaches Dynamic Adaptation: Understanding the Power-Performance Tradeoff Modeling and control GN3 Green Networking: Advances in Environmental Policy and Practice

  46. A Taxonomy of Undertaken Approaches Re-engineering: Optical Backbone Networks The creation of optical paths (via DWDM) within optical backbone networks has been utilized for the dynamic establishment of high capacity circuits with reduced energy demands GN3 Green Networking: Advances in Environmental Policy and Practice

  47. Standardization efforts • The European Union already published a number of Codes of Conduct • covering different categories of equipment, including broadband equipment, data centres, power supplies, UPS. The Code of Conduct on Energy Consumption of Broadband Equipment has been defined by the EU, which sets targets in reducing energy consumption in the access network • IEEE has also ratified the Energy Efficient Ethernet (EEE) standard in October 2010, also known as IEEE 802.3az, • which is a set of enhancements to the twisted-pair and backplane Ethernet networking standards that will allow for more than 50% less power consumption during periods of low data activity, while retaining full compatibility with existing equipment. • ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy that has defined the ENERGY STAR Product Specifications. • IETF has recently established the Energy Management (EMAN) Working Group. • Different interesting issues are under consideration by the Environmental Engineering Technical Body in ETSI • The Home Gateway Initiative (HGI) launched an internal task force called ”Energy Saving” with the objective of setting up requirements and specifications for energy efficiency in the home gateways • ITU-T Study Group 15 (Optical transport networks and access network infrastructures) • ITU-T created in September 2008 a new Focus Group, namely, FG ICT & Climate Change GN3 Green Networking: Advances in Environmental Policy and Practice

  48. ECONET approach GN3 Green Networking: Advances in Environmental Policy and Practice

More Related