1 / 21

CLP-310 Series T raining Feb. 200 8

CLP-310 Series T raining Feb. 200 8. CRU Technical Notes. Objectives. Understanding and building the ability to deal with Component and layout of OPC-unit / dev-unit Operations of each component and unit Troubleshooting: possible problems in the field and solution to each problem.

renee-donaldson
Download Presentation

CLP-310 Series T raining Feb. 200 8

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CLP-310 SeriesTraining Feb. 2008 CRU Technical Notes

  2. Objectives • Understanding and building the ability to deal with • Component and layout of OPC-unit / dev-unit • Operations of each component and unit • Troubleshooting: possible problems in the field and solution to each problem

  3. I. Consumable Part For the best image quality, replace cartridges within appropriate time Capacity : (additional) 1,000 images (Y,M,C) & 1,500 (K) images (initial w/ set) 700 images (Y,M,C) & 1,000 (K) images

  4. Ⅱ. Composition & Function 1. Toner Cartridge Yellow Toner Cartridge Magenta Toner Cartridge Cyan Toner Cartridge Black Toner Cartridge Be careful not to damage dev. roller while plug- in & out of toner cartridge Front Cover High voltage contact point (Supply Roller) High voltage contact point (Developing Roller) CRUM

  5. Ⅱ. Composition & Function 1. Toner Cartridge Development Method : Non-magnetic one component type Toner type : non magnetic one component pulverized toner Capacity : 1,000(Y,M,C) / 1,500(K) Sheets (N/N, Simplex, ISO/IEC 19798 standard pages) Sus. Blade Developing Roller High voltage contact point (Supply Roller) Spacer DR(Gap-Ring) High voltage contact point (Developing Roller)

  6. Ⅱ. Composition & Function Gear Agitator Gear IDLE Gear Paddle Gear SR 1. Toner Cartridge Gear train : Torque transferred from SET drive gear to DR gear. Gear DR

  7. Ⅱ. Composition & Function Toner Slider Toner Agitator Shaft Paddle wire Developing roller Supply roller 1. Toner Cartridge Toner Supply Type : toner slider and supply roller Toner layer control : toner layer thickness on dev. roller controlled by SUS. blade’s trail-edge Dev. gap control : gap ring located at both sides of dev. roller

  8. Ⅱ. Composition & Function 2. OPC Unit Layout OPC(Organic Photo-Conductor) Life : Print over 35,000 Images OPC Cleaning: Cleaning Blade (urethane)

  9. Ⅱ. Composition & Function OPC Drum Shaft OPC Handle OPC Cleaning blade Charger Roller Cleaning Roller Shaft Paddle OPC Erager Lamp Slider Waste OPC 2. OPC Unit Layout OPC(Organic Photo-Conductor)

  10. Ⅱ. Composition & Function Error List • Invalid toner • Invalid Yellow (M/C/K) toner kit • Mismatch of model name, supplier ID, company name and etc. • Not install • Toner cartridge (Y/M/C/K) is not installed • Service call error • Fuser Low (Over) heat error • LSU error • Transfer belt error • Dev. Home error • Motor Lock error

  11. Ⅳ. Printing Problems &Solution 1. Vertical Black Line and Band Description: 1. Straight thin black vertical lines occur on the printout 2. Dark black vertical bands occurs on the printout Check and Cause Solution • Damaged development roller, deformed doctor-blade : In case of one color • Scratched / contaminated surface of the charging roller in OPC set : all colors layered • Damaged / contaminated ITB (Image Transfer Belt) : waste toner color • Damaged / deformed cleaning blade (OPC/ITB) : waste toner color • Replace toner cartridge and retest. • Replace OPC cartridge and retest. • Replace ITB cartridge and retest. • Replace OPC or ITB and retest.

  12. Ⅳ. Printing Problems &Solution 2. Vertical White Line Description: White vertical lines in the image. Check and Cause Solution • Contamination of the window or internal lenses of LSU : in case of all colors • Foreign matter in toner cartridge : one color • If the fuser is damaged, white spots occur periodically : all colors • ITB cleaning blade could touch with ITB wiping off a part of image : all colors • Clean the LSU window with recommended cleaner (IPA). • If foreign matter is inside LSU, replace LSU unit. • Replace toner cartridge. • Replace ITB unit. • Check the fuser ribs corresponding to white spot. Remove foreign matter or replace parts.

  13. Ⅳ. Printing Problems &Solution 3. Horizontal Dark Band or White Band Description: Dark or blurry horizontal stripes occur on the printout periodically Check and Cause Solution • Bad contacts between the imaging unit and high voltage terminals. • The rollers in the toner cartridge may be contaminated. • Charge roller – 37.7 mm • Supply roller – 32.8 mm • Develop roller – 26 mm • Transfer roller(T1) – 43.8 mm • Transfer roller(T2) – 55.2 mm • OPC Drum – 188.5 mm • Fusier – 88.4 mm • Clean all high voltage terminals in the cartridge and the frame of the printer. • See the periodic table in the left to identify what sort of unit or component causes the problem. • Replace the relevant unit.

  14. Ⅳ. Printing Problems &Solution 4. Black / White Spot Description: 1. Dark or blurry spots occur periodically in the printing 2. White spots occur periodically in the printing Check and Cause Solution • Foreign matter sticking or contamination on toner cartridge, OPC drum, ITB unit, or fuser. • 1) Charge roller – 37.7 mm • 2) Supply roller – 32.8 mm • 3) Develop roller – 26 mm • 4) Transfer roller(T1) – 43.8 mm • 5) Transfer roller(T2) – 55.2 mm • 6) OPC Drum – 188.5 mm • 7) Fusier – 88.4 mm • See the periodic table in the left to identify what sort of unit or component causes the problem. • Replace the relevant unit.

  15. Ⅳ. Printing Problems &Solution 5. Dark Image or Black Description: The printed image is dark Check and Cause Solution • No charging voltage in the engine board. • Regardless of printable image, composite black image is printed. There could be a problem in charging process • In the case, it could cause wrap jam in the fuser Check electric contacts to the HVPS

  16. Ⅳ. Printing Problems &Solution 6. Uneven Density Description: Print Density is uneven between left and right Check and Cause Solution • Check if transfer roller and connected parts are properly installed • Replace ITB unit • Replace toner cartridge • The pressure on the transfer roller by right and left spring is not even: springs are damaged, transfer roller is improperly installed, or transfer roller’s bushing or holders are damaged. • Toner cartridge has been expired. • Toner level is too low in the development cartridge.

  17. Ⅳ. Printing Problems &Solution 7. Ghost Description: Ghosting occurs in the interval of 26 mm or 188.5mm Check and Cause Solution • Bad contacts by contamination or foreign matter in HVPS board • Toner cartridge is expired. • Bad OPC • Check electric contacts to HVPS. Replace HVPS board • Replace toner cartridge • Replace OPC unit

  18. Ⅳ. Printing Problems &Solution 8. Stains on the printout Description: The printout are stained Check and Cause Solution • Toner leakage due to improper sealing in development unit. • Poor cleaning of OPC Unit or ITB Unit • Replace toner cartridge • Replace OPC Unit or ITB Unit

  19. Ⅳ. Printing Problems &Solution 9. Stains on Back of Page Description: The back of the page is stained periodically Check and Cause Solution • 55.2 mm: 2nd Transfer roller could be contaminated when engaged or disengaged. • 88.4 mm: Fuser roll could be contaminated due to cold offset • Check the period and replace the part with problem. • If there is a problem with disengagement, please check the operation of the clutch of driving T2 Roller, and replace it if it is necessary.

  20. Ⅳ. Printing Problems &Solution 10. Blank page Print out Description: Blank page is printed Check and Cause Solution • Bad electric contacts in toner cartridge or OPC unit • LSU Unit error • No development high voltage applied from HVPS • Check OPC-ground contact. • Check LSU Unit • Check HVPS Board

  21. Ⅳ. Printing Problems &Solution Table. Periodic Images according to Rollers No Roller Period 현상 188.5 mm 1 OPC Drum White /Black Spot 2 Charge Roller 37.7 mm White /Black Spot 3 Supply Roller 32.8 mm Periodical Band 4 Developing Roller 26.8 mm White /Black Spot, Periodical Band 5 Transfer Roller(T1) 43.8 mm Periodical Band 6 Transfer Roller(T2) 55.2 mm Periodical Band 7 Gap-ring 32.84mm Periodical Band 8 Fusing Belt 32.9 mm White /Black Spot

More Related