70 likes | 80 Views
Trickle Varnish Impregnating Machine is suitable for pre-heating, trickling and post heating of stators. The machine is simple and compact in design. It is easy for operation and maintenance.
E N D
About Us AR Engineering is a company founded by Mr. Arvind Mutalik in 1988, for manufacturing of transformer oil filtration machines. Since then AR Engineering has developed different types of Insulating Oil upgrading systems suitable for in-house and onsite operation. The plants are suitable for Transformer & Capacitor Manufacturers, Transformer Repairers, Transformer Owners, Oil filtration service providers etc. These plants work on low temperature, high vacuum principle. We also developed Trickle Impregnating Machines for varnishing of electrical machines windings such as armatures, rotors, field coils, stators. These machines are suitable for varnishing of electrical windings in mass production. Auto electrical parts, mixers, fans, electrical motors, Instrument transformers etc. www.arengg.co.in/batch-type-trickle-impregnating-machine.html
Products • High-Vacuum Transformer Oil Filtration and Dehydration Plants • Varnishing Machines • Trickle Impregnation Technique • Batch Type Trickle Impregnating Machine • Index Type Trickle Impregnating Machine • Vacuum / Pressure Impregnation Plants • Industrial Oil Purification Systems www.arengg.co.in/batch-type-trickle-impregnating-machine.html
Batch Type Trickle Impregnating Machine Manufacturer In India - ARENGG.CO.IN Trickle Varnish Impregnating Machine is suitable for pre-heating, trickling and post heating of stators. The machine is simple and compact in design. It is easy for operation and maintenance. It is ideally suitable for batch type production of stators. The machine is suitable for carrying out following automatic cycle Load stators on spindles, connect winding wires, close the front door and start cycle with push button. Spindles start rotating and get pre-heated to predetermined temperature. Temperature of stator is sensed by non contact TIC. Spindle holding plate is tilted up and varnish pipes are tilted down to adjust the place of trickling. Varnish pump starts and pre determined varnish is trickled on stators / rotors and pump stops. Trickle Temperature is maintained with the non contact TIC Spindle holding plate is tilted down and varnish pipes are tilted up and post heating starts. After completing the post heating spindles, stop. Open the door & remove wire connections and Un-load the ready stators. www.arengg.co.in/batch-type-trickle-impregnating-machine.html
Trickle varnishing Machine consists of following major components : • Rotation System • Job tilting and Varnish tubes Positioning System • Varnish Feeding System • Heating System • Centralized control panel • Fumes Extraction System www.arengg.co.in/batch-type-trickle-impregnating-machine.html
www.arengg.co.in/batch-type-trickle-impregnating-machine.htmlwww.arengg.co.in/batch-type-trickle-impregnating-machine.html
Address AR EngineeringL - 77, Additional M.I.D.C.,Satara - 415004, (India) E-mail Mobile oilfiltrationplants.comoilfiltermachineindia.com +91 - 98223 93556 +91 - 94226 05890 www.arengg.co.in/batch-type-trickle-impregnating-machine.html
THANK YOU… www.arengg.co.in/batch-type-trickle-impregnating-machine.html