how to true a bicycle wheel

1. wheel is the process of adjusting the tension of the spokes to make the wheel round and true. This is done by using a spoke wrench to turn the spoke nipples, which are the small metal caps that hold the spokes in place. There are two main types of truing: lateral truing and radial truing. Lateral truing is the process of making the wheel round side-to-side. Radial truing is the process of making the wheel round up and down. How to true a bicycle wheel, you will need a spoke wrench, a truing stand, and a way to track the deviations of the wheel. A truing stand is a device that holds the wheel in place and allows you to spin it while you are truing it. To start truing the wheel, you will need to identify any lateral or radial deviations. You can do this by spinning the wheel and looking for any areas where the rim is not touching the truing stand evenly. Once you have identified any deviations, you can start adjusting the spoke nipples to correct them. The amount of spoke tension that you need to adjust will depend on the severity of the deviation. For small deviations, you may only need to turn the spoke nipple a few degrees. For larger deviations, you may need to turn the spoke nipple a few full turns. It is important to be careful when truing a bicycle wheel, as too much spoke tension can damage the wheel. If you are not sure how to true a bicycle wheel, it is best to take it to a professional bike mechanic. Here are some tips for truing a bicycle wheel: Start by identifying any lateral or radial deviations. Use a spoke wrench to turn the spoke nipples to correct the deviations. Be careful not to overtighten the spoke nipples, as this can damage the wheel. If you are not sure how to true a bicycle wheel, take it to a professional bike mechanic.