15 Cleaning Secrets Car Detailers Don’t Want You to Know

1. 15 Cleaning Secrets Car Detailers Don’t Want You to Know It’s certain that the regular everyday car cleaning can’t give you the kind of detailed cleaning you want for your car except you visit a car detailing service near you. However, you feel that the car detailing service center near you is quite expensive, thus you are wondering to yourself, “It’d beniceif I could do it myself and save some extra bucks!” Yeah right? Not to worry, by the end of this post you’d definitely be wowed by the 15 cleaning secrets your neighborhood car detailer don’t want you to know, so you can keep coming back. Start by Rinsing With Water before Applying Soap One of the worst things you can do to your car is to apply soapy water to your car’s paint before first rinsing with water. Applying Soapy water to your car’s dry paint will obviously slog the road grit and surface dust on the paint job, which will wear off your car’s paint over time. What you should do is to rinse the car with water first to clear off the filth as much as possible before applying soapy water. Ensure You Use the Right Soap for the Job Most DIYers use dishwashing liquid as their go-to-choice, but that shouldn’t be the case. This is because dishwashing liquid could be harsh on your car paint. It does a lot of harm to your car paint by sucking crucial oils from your car’s paint finish, thereby shortening the lifespan of the car paint. Thus, it’s important you use the right car wash liquid that was made specifically for the job.

2. Make Use of a Microfiber Mitt Instead Of a Sponge to Preserve Your Car’s Paint By using a sponge on your car’s bodywork while washing, you’d be holding a lot of grit and dirt in large holes. Even if you squeeze the sponge, some of the grit will still be trapped init. Thus, applying the same sponge on your car again to wash it will make the sponge disguised sandpaper on your paint job. That’s why professional detailers use a Microfiber Mitt. Have Two Buckets Around Let one bucket contain the water for rinsing and the other have the soapy water. After every soapy wipe, use the mitt dipped in the rinse water to extricate the dirt on the car. Ensure you do this more often, for every soapy wipe, clean with the rinsed water. By doing this, you will keep the soapy water clean. Dry your Car with a Microfiber towel instead of a Chamois Using a Chamois to dry your car will do you no good, rather it will only steep up water and pick up the dirt that’s left after you’ve rinsed with water, meshing tiny debris into your paint. Conversely, the microfiber towel picks all the tiny particles that may be on the car. With that, you can easily remove the dirt on the car by rinsing the microfiber towel in clean water after wiping it with the car. Then keep squeezing the towel and drying the car. Before Polishing Your Car, Ensure You Remove Minor Scratches This particular step is what distinguishes a car detailer from an average DIYer. Of course, car polishing enhances the shine of your car but it definitely doesn’t make the scratches disappear. It’s better you remove the scratches on your car first with a car scratch removal kit before you polish. With that, you would get a better shine. At least that’s what the professional car detailers do. ..Ask them? Obviously, they won’t tell you!

3. Get Yourself a Dual-Action Polisher You can never catch a car detailer without a dual-action polisher. Not even on their death bed right? You can say that again! However, most people tend to confuse this awesome tool with a high-speed buffer, well, except for the car detailers. While high-speed buffers will burn your paint off your car if you wrongly operate it, the dual- action polisher will never do that even if it’s operated by your 5-year-old baby. This is because of the low rotational speed of the dual-action polisher which gradually oscillates on your car paint, plus you can get a hang of it in minutes! Use a Microfiber Towel to Remove the Wax Haze Oh yes! You guessed right. The microfiber towel again? Yeah yeah!! A professional car detailer can’tjust get over it. Make circular motions on your car’s body as you wipe off the wax haze. When the towel gets laden with the wax, you can pleat it to a cleaner section. If the first microfiber towel gets laden, use the second one and repeat the process. Make Use of a Vinyl Protection and a Non-Silicone Matte Finish Dash Have you ever found a slick film on your car’s dashboardwhich in fact attracts more dust? If yes is your answer, then we won’t be wrong to say; the offender is the Silicone dashboard protectant you last sprayed on your dashboard. Of course yes! That’s the source of the slick film on your dashboard. So, how can you solve this persistent issue? Simple, just use non-silicone matte finish protectants. They’ll go a long way for your car as they can help you reduce glare rather than have you clean your dash more often.

4. Your Glass Should Be the Last Thing You Clean In Your Car Cleaning your dashboard and smearing a vinyl protectant on it should be done before finally cleaning the inside of your car windows unless you want to clean them all over again. That’s why if you’ve been observing the car detailer when he is working on your car, he always clean the windows last. Yeah right! You just remembered? Oh yes! Apparently, saving your car window cleaning for the last is something you shouldn’t negotiate. Because, cleaning your car windows at the tail end removes the entire spill from the vinyl and cleaning treatment spray, leaving your car windows glittering clean. Articles Source : https://carwithyou.com/15-cleaning-secrets-car-detailers-dont-want-you-to- know/