1 / 9

Catalytic transformation of bio-glycerol to diols

Slovak University of Technology , Bratislava Faculty of Chemical and Food Technology Dep . of Organic Technology Joint Slovak-Hungarian Laboratory for Development of Catalyzed Chemical Processes of Biomass Utilization *. Catalytic transformation of bio-glycerol to diols. Andrej Ševčík

rocio
Download Presentation

Catalytic transformation of bio-glycerol to diols

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Slovak UniversityofTechnology, Bratislava FacultyofChemical and FoodTechnology Dep. ofOrganicTechnology Joint Slovak-Hungarian Laboratory for Development of Catalyzed Chemical Processes of Biomass Utilization* Catalytic transformation of bio-glycerol to diols Andrej Ševčík Alexander Kaszonyi *Founded by financial support of project No. HUSK/1101/1.2.1/0318 “Chemical Processes of Biomass Utilization in the Slovak-Hungarian Frontier Region” 17thOctober, 2012, Bratislava

  2. Diols • selective catalytic hydrogenolysis of glycerol represents a low cost and green route for 1,2-propanediol which is a major commodity chemical used in the production of antifreeze functional fluids, paints and polyester resins. • due to a presence of -OH functional groups, diols can be converted to aldehydes, esters, amines and carboxylic acids

  3. Hydrogenolysis of glycerol to 1,2-PD Supported catalysts - Batch reactor : • Yuan (2010) - 180°C, 3 MPa, cat. CuO/MgO, conv. of GLY - 72%, sel. to 1,2-PD - 97 % • Zhao(2010) - 200°C, 6 MPa, cat. Ni/Na-X, conv. of GLY - 86 %,sel. to 1,2-PD - 94 % • Xia (2012) - 180°C, 2 MPa, cat. Cu-Pd/solid base, conv. of GLY - 70%, sel. to 1,2-PD - 98% - Down-flow reactor: • Zhou (2010) - 220°C, 4MPa, cat. CuO-ZnO-Al2O3, conv. of GLY - 81%, sel. to 1,2-PD - 93% • Zheng(2010) - 250°C, 4 MPa, cat. Cu/SBA-15, conv. of GLY - 96%, sel.to 1,2-PD - 90 %

  4. Hydrogenolysis of glycerol to 1,2-PD Unsupported catalysts - batch reactor: • Kim(2010) - 220°C, 8 MPa, Cu-Cr-O cat., different methods of catalyst preparation (wet impregnation, co-precipitation), important is the formation of CuCr2O4 structure • different activity for the hydrogenolysis of glycerol is caused by various forms of copper in the catalyst structure • Mane (2011) - 220°C, 7 MPa, effect of promoters (Al, Ba, Zn) to Cu-Cr-O cat.

  5. Influence of different supports to activity and selectivity of catalysts Reaction conditions: 5g catalyst, 150 °C, flow rate of GLY 1ml/h, inicial concentration of GLY 50 wt.%, flow rate of hydrogen 30ml/min, 5h time on stream

  6. Effect of different amount of metals loaded on g-alumina Reaction conditions: 5g of catalyst (K10-0 is 10 wt.% of Cu and K5-5 is 5 wt.% of Cu and 5 wt.% of Cr), inicial concentration of GLY 50 wt.%, flow rate of GLY 1ml/h, flow rate of hydrogen 30ml/min, 5h time on stream

  7. Hydrotalcite types of catalysts on hydrogenolysis of glycerol Reaction conditions: 5g catalyst, flow rate of GLY 1ml/h, flow rate of hydrogen 30ml/min, 5h time on stream

  8. Aim of Work • Preparation of catalysts based on copper on different supports • Modification of these catalysts with other metals, especially with chrome • Study of the influence of catalyst preparation method and reaction conditions on the catalytic activity • Study of the influence of impurities in glycerol on properties of catalytic systems • Chemical and physical characterization of prepared catalysts • Optimization of reaction conditions with regard to maximize the yield of the diols

  9. Thankyouforyourattention This work was supported by the Slovak Research and Development Agencyunder the contract No. APVV-0133-11

More Related