1 / 5

DT Sector Collector

Detector in UXC. DT front end Barrel. Trigger Boards (BTI,TRACO,TSS). C C B. DT station (minicrate). LVDS copper link. Towers in UXC. Server Board. Sector Collector. Opto link. DT Sorter. DT Track Finder. Counting room in USC. GLOBAL MUON TRIGGER. Main functionalities:

rod
Download Presentation

DT Sector Collector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Detector in UXC DT front end Barrel Trigger Boards (BTI,TRACO,TSS) C C B DT station (minicrate) LVDS copper link Towers in UXC Server Board Sector Collector Opto link DT Sorter DT Track Finder Counting room in USC GLOBAL MUON TRIGGER • Main functionalities: • - a SC board serves a sector (4/5 stations) • track sorting (1 out of 2 tcks/station) • DT trigger path syncronization (compensate for Time-Of-Fligth, TTC fibers and LVDS cables) via clock delay and pipe lines. DT Sector Collector • LVDS link: • - 2 Ethernet cables/minicrate FTP cat.6 • TX rate @ 480 Mbps (< 50 m), with National • Semicond. chipset: • serializer 10-1 DS92LV1021 (8 IC/link) • cable equalizer CLC014 (8 IC/link) • deserial. 1-10 DS92LV1212A (8 IC/link) Opto link: - 6 multimodal fibers (Ericsson)/SC (< 100 m) - TX rate @ 1.6 Gbps, with GOL serializer (32 bits @ 40 MHz), and Honeywell opto-ICs: a) VCSEL trasmitter HFE4190-541 b) Pin Diode receiver HFD3180-102 Fabrizio Odorici - INFN Bologna

  2. Vcc Control Clock Sector Collector to Track Finder opto-link TF crate backplane 1 Opto RX (4 ch)board / PHTF LVDS Rx piggy boards PHTF (f view) 6 board/wedge SC MB1 Same boards MB2 MB3 ETTF (h view) 1 board/wedge MB4 • Stratix-GX FPGA used as: • Deserializer • RX parity checker • I/O Router 2 Opto Rx (5 ch) board / ETTF Opto Tx (6 ch) piggy board Fabrizio Odorici - INFN Bologna

  3. Sector Collector Status Fabrizio Odorici - INFN Bologna

  4. SC prototypes Production of 4 complete SC for Magnet Test Fabrizio Odorici - INFN Bologna

  5. Full SC production Fabrizio Odorici - INFN Bologna

More Related