2018 Huawei H35-411 Exam Questions and Answers

1. Exam Code: H35-411 Exam Name: Huawei Certified Network Professional-GSM Q & A: 199 Q&As Visit more information aboutH35-411 exam: https://www.testpassport.com/HCNP/H35-411.asp Share some H35-411questions and answers below. 1. Which of the following descriptions is about the PMU module functions used in the 3900 Series Base Station? A. Convert 220V AC to 48VDC and provide 48VDC input to DCDU. B. Monitor module failure (output overvoltage, no output, fan fault) alarm, module protection (over temperature, input over pressure protection) alarm and module out of position alarm. C. Provide power distribution detection and report alarm function, and provide dry node alarm report function. D. Monitor battery charge and discharge information. Answer: C 2. Which of the following boards are unique to the MPS enclosure? (Multiple Choice) A. XPU B. GCU

2. C. SCU D. OMU Answer: BD 3. After the BSC6900 accident, what data information is needed for the second batch? (Multiple Choice) A. Traffic statistic Log B. Single pass log C. DEBUG log D. Last words E. OMU log F. Text log Answer: ABCDEF 4. You cannot use the script file in the ini format to create a BSC physical network element on the M2000. A. True B. False Answer: B 5. The number of network cables between the BSC active and standby OMU boards and the LAN can be two or four, which is determined by

3. customer requirements. A. True B. False Answer: A 6. Regarding the CME server software and client software, which of the following statement is correct? (Multiple Choice) A. When the M2000 is installed in a stand-alone, high-availability, SLS system, the CME server software is installed on the M2000 main server. B. When the M2000 is deployed in a remote location, the CME server software must be installed on the M2000 primary server and standby server. C. After the CME server software is installed, you need to install the components of the corresponding network element. D. After the CME client is installed, it is integrated into the M2000 client and starts the CME client through the M2000 client. Answer: ABCD 7. After the OMU is replaced, you can use the same operating system as the original OMU or switch to another operating system. However, the active and standby operating systems must be consistent. A. True

4. B. False Answer: A 8. What is the maximum number of time slots occupied by the Ater signaling link on each Ater interface board? A. 24 B. 32 C. 64 D. 56 Answer: C 9. The OIUa board supports hot swap. A. True B. False Answer: A 10. Which of the following description about the plug-in frame DIP is wrong? A. Wear an ESD wrist strap properly before installing and ground the ESD wrist strap (the ESD jack on the cabinet). See Wearing an ESD wrist strap. B. The plug-in frame is installed at the time of shipment, and there is

5. no need to pay attention to the dialing code. C. After the cabinet is powered on, the plug-in frame DIP switch is invalid. Be sure to check and set the plug-in frame DIP switch before the cabinet is powered on. D. The dialing code uses odd parity, and the 8-digit dialing code must be an odd number. Answer: B Testpasport provides valid exam questions for many IT certification exams, such as Oracle, Microsoft, IBM, Huawei, CompTIA, Dell, and others. Hot exams have Testpassport. been updated at

6. Huawei H13-611-ENU Exam Huawei H12-222-ENU Exam Huawei H19-307-ENU Exam Huawei H19-302-ENU Exam