1 / 25

Nuclear Fuel, Uranium Enrichment, Fuel Fabrication, MOX

Nuclear Fuel, Uranium Enrichment, Fuel Fabrication, MOX. Seminar on Nuclear Science and Technology for Diplomats P. Adelfang (+)Division of Nuclear Fuel Cycle and Waste Technology (NEFW) Department of Nuclear Energy (NE) IAEA, Vienna, February 6-8, 2007. Ends of the Nuclear Fuel Cycle.

rollin
Download Presentation

Nuclear Fuel, Uranium Enrichment, Fuel Fabrication, MOX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Nuclear Fuel, Uranium Enrichment, Fuel Fabrication, MOX Seminar on Nuclear Science and Technology for Diplomats P. Adelfang (+)Division of Nuclear Fuel Cycle and Waste Technology (NEFW) Department of Nuclear Energy (NE) IAEA, Vienna, February 6-8, 2007

  2. Ends of the Nuclear Fuel Cycle

  3. The Reactor: Core of the Nuclear Fuel Cycle

  4. The Nuclear Fuel Cycle

  5. Uranium Mining and Milling

  6. Yellow Cake Final Product of Milling Step – 70 to 80 % uranium

  7. Conversion, Enrichment and Fuel Fabrication

  8. Natural Uranium 235U only fissile nuclide – only 1 atom of 235Uin 140 atoms of 238U

  9. Enrichment • A number of enrichment processes have been demonstrated in the laboratory • Only two, the gaseous diffusion process and the centrifuge process, are operating on a commercial scale • In both of these, UF6 gas is used as the feed material • Molecules of UF6 with U-235 atoms are about one percent lighter than the rest, and this difference in mass is the basis of both processes • Large commercial enrichment plants are in operation in France, Germany, Netherlands, UK, USA, and Russia, with smaller plants elsewhere

  10. Enrichment: UF6 Feed Container

  11. Enrichment: Centrifuge Process • vacuum tubes, each containing a rotor one to two metres long and 15-20 cm diameter. • rotors are spun rapidly, at 50,000 to 70,000 rpm • heavier molecules with U-238 increase in concentration towards the cylinder's outer wall • there is a corresponding increase in concentration of U-235 molecules near the centre. • enriched gas forms part of the feed for the next stages, depleted UF6 gas goes back to the previous stage (cascade) • very high speeds:, outer wall spinning cylinder 400 and 500 metres per second= 1 million times the acceleration of gravity

  12. Enrichment: Centrifuge Process

  13. Enrichment: Gaseous Diffusion Process • involves forcing UF6 under pressure through a porous membranes • as 235U molecules are lighter than the 238U molecules they move faster and have a slightly better chance of passing through the pores in the membrane • the UF6 which diffuses through the membrane is thus slightly enriched, while the gas which did not pass through is depleted in 235U • this process is repeated many times in a series of diffusion stages called a cascade • enriched UF6 is withdrawn from one end of the cascade and depleted UF6 is removed at the other end • the gas must be processed through some 1400 stages to obtain a product with a concentration of 3% to 4% 235U

  14. Enrichment: Gaseous Diffusion Process The large Tricastin enrichment plant in France (beyond cooling towers). The nuclear reactors in the foreground provide power for it.

  15. Conversion, Enrichment and Fuel Fabrication

  16. Conversion and Nuclear Fuel Fabrication • UF6, in solid form in containers, is heated to gaseous form, and the UF6 gas is chemically processed to form LEU uranium dioxide (UO2) powder • this powder is then pressed into pellets, sintered into ceramic form (fuel pellets) • pellets are then loaded into Zircaloy tubes that are afterwards hermetically closed (fuel rods) • rods are constructed into fuel assemblies • fuel assemblies are made with different dimensions and number of fuel rods, depending on the type reactor

  17. UO2, Pellets and Fuel Assembly

  18. Fuel Rods

  19. Fuel Assembly

  20. MOX Fuel

  21. MOX Fuel

  22. MOX Fuel • Plutonium, made in power reactors and from dismantled nuclear weapons, is a valuable energy source when integrated in the nuclear fuel cycle • Over one third of the energy produced in most nuclear power plants comes from plutonium. It is created there as a by-product. • 'MOX' is derived from 'mixed oxides', and refers to reactor fuel made from a mixture of plutonium and uranium oxide • For use in a light water reactor, the proportion of plutonium is about 5%. This is a similar fissile content as low enriched uranium fuel • MOX is formed into ceramic fuel pellets, extremely stable and durable, and which are sealed in metal (usually zirconium) tubes, which in turn are assembled into fuel elements • In most cases a part of the reactor core can be loaded with MOX fuel elements without engineering or operational modifications to the reactor • Plutonium is radiologically hazardous, particularly if inhaled, so must be handled with appropriate precautions

  23. MOX Fuel: Glove Boxes

  24. MOX Fuel: Glove Boxes

  25. IAEA Thank you for your attention …atoms for peace.

More Related