Who Performs Alloy Chain Inspections & How Often

1. WHO PERFORMS ALLOY CHAIN INSPECTIONS & HOW OFTEN?

2. INTRODUCTION  It is the only Chain grade recommended option used in overhead lifting equipment, alloy chain slings, and binder too. Alloy steel, Heat treated 25% stronger than Grade 80 Alloy Chain.  Alloy chain inspect and document at a minimum of 12- months of periods.  All inspection should be performed by an inspection expert who can identify the problems and what steps needs to be taken to prevent any hazard.

3. FIRST INSPECTION:  First inspect the chain after receiving it manufacturer important. from is the very  Cross-check ensure ordered and that the ratings meet all of characteristic requirements. the tag to that what you your and project lifting

4. FREQUENT:  Hire an expert to perform a regular investigation defects and other issues on joints and fastenings. optical damage, of  Shock loads, severe angles, edges and excessive heat can quickly Chain sling, necessary to do a visual inspection change or in lifting Uses. damage so a is it before shift

5. AT FIX PERIOD:  This professional Technician.  Factors that matters in inspection at Fix timing: Multiple time uses The badness of service conditions Nature of the performed Experience gained on the service life of wire rope slings used in similar applications Inspection is done by a 1. 2. lifts being 3. 4.

6. Tel: +971 4 2236724 Fax: +971 4 2274669 WWW.ROMAENT.COM