Why and how often alloy chain should be inspected

1. why and how often alloy chain should be inspected?

2. introduction • It is the only Chain grade recommended option used in overhead lifting equipment, alloy chain slings, and binder too. Alloy steel, Heat treated 25% stronger than Grade 80 Alloy Chain. • Alloy chain inspect and document at a minimum of 12- months of periods. • All inspection should be performed by an inspection expert who can identify the problems and what steps needs to be taken to prevent any hazard.

3. first inspection: • First inspect the chain after receiving it from the manufacturer is very important. • Cross-check the tag to ensure that what you ordered and that the ratings meet all of your project characteristic and lifting requirements.

4. frequent: • Hire an expert to perform a regular optical investigation of damage, defects and other issues on joints and fastenings. • Shock loads, severe angles, edges and excessive heat can quickly damage a Chain sling, so it is necessary to do a visual inspection before shift change or in lifting Uses.

5. at fix period: • This Inspection is done by a professional Technician. • Factors that matters in inspection at Fix timing: • Multiple time uses • The badness of service conditions • Nature of the lifts being performed • Experience gained on the service life of wire rope slings used in similar applications

6. Tel: +971 4 2236724 Fax: +971 4 2274669 www.romaent.com