190 likes | 333 Views
University of Palestine College of Engineering & Urban Planning Applied Civil Engineering. Discussion Lecture(4) Chapter(3) Hydrostatic Forces on Surfaces. Lecturer: Eng. Eman Al.Swaity. 3.2 TOTAL PRESSURE AND CENTRE OF PRESSURE.
E N D
University of Palestine College of Engineering & Urban Planning Applied Civil Engineering Discussion Lecture(4) Chapter(3) Hydrostatic Forces on Surfaces Lecturer: Eng. Eman Al.Swaity
3.2 TOTAL PRESSURE AND CENTRE OF PRESSURE Total pressure is defined as the force exerted by a static fluid on a surface either plane or curved when the fluid comes in contact with the surfaces. This force always acts normal to the surface Centre of pressure is defined as the point of application of the total pressure on the surface. There are four cases of submerged surfaces on which the total pressure force and centre of pressure is to be determined. The submerged surfaces maybe : 1. Vertical plane surface, 2. Horizontal plane surface, 3. Inclined plane surface, and 4. Curved surface.
3.3 VERTICAL PLANE SURFACE SUBMERGED IN LIQUID Where: A = Total area of the surface ĥ = Distance of C.G. of the area from free surface of liquid G = Centre of gravity of plane surface P = Centre of pressure h* = Distance of centre of pressure from free surface of liquid.
Problem 3.1 A rectangular plane surface is 2 m wide and 3 m deep. It lies in vertical plane in water. Determine the total pressure and position of centre of pressure on the plane surface when its upper edge is horizontal and (a) coincides with water surface, (b) 2.5 m below the free water surfaces
Problem 3.1-solution (b) 2.5 m below the free water surfaces
Problem 3.2 Determine the total pressure on a circular plate of diameter 1.5 m which is placed vertically in water in such a way that the centre of the plate is 3 m below the free surface of water. Find the position of centre of pressure also.
Problem 3.4 A circular opening, 3 m diameter, in a vertical side of a tank is closed by a disc of 3 m diameter which can rotate about a horizontal diameter. Calculate :(i) the force on the disc, and (ii) the torque required to maintain the disc in equilibrium in the vertical position -when the head of water above the horizontal diameter is 4 m.
Problem 3.7 A vertical sluice gate is used to cover an opening in a dam. The opening is 2 m wide and 1.2 m high. On the upstream of the gate, the liquid of sp. gr. 1.45, lies up to a height of 1.5 m above the top of the gate, whereas on the downstream side the water is available up to a height touching the top of the gate. Find the resultant force acting on the gate and position of centre of pressure. Find also the force acting horizontally at the top of the gate which is capable of opening it. Assume that the gate is hinged at the bottom
Problem 3.11 A tank contains water up to a height of 0.5 m above the base. An immiscible liquid of sp. gr. 0.8 is filled on the top of water up to 1 m height. Calculate : (i) total pressure on one side of the tank, (ii) the position of centre of pressure for one side of the tank, which is 2 m wide.
3.4 HORIZONTAL PLANE SURFACE SUBMERGED IN LIQUID Total pressure is defined as the force exerted by a static fluid on a surface either plane or curved when the fluid comes in contact with the surfaces. This force always acts normal to the surface Centre of pressure is defined as the point of application of the total pressure on the surface. There are four cases of submerged surfaces on which the total pressure force and centre of pressure is to be determined. The submerged surfaces maybe : 1. Vertical plane surface, 2. Horizontal plane surface, 3. Inclined plane surface, and 4. Curved surface.
End of the Lecture Let Learning Continue