1 / 21

Chapter 5 - Transport and Network Layers TCP/IP (Part 1) Dr. V.T. Raja Oregon State University

Chapter 5 - Transport and Network Layers TCP/IP (Part 1) Dr. V.T. Raja Oregon State University. Chapter Objectives : Understand primary functions of transport and network layers Understand the “big picture” Five-layer network model. Examples of Transport/Network Layer Protocols. Examples:

rusty
Download Presentation

Chapter 5 - Transport and Network Layers TCP/IP (Part 1) Dr. V.T. Raja Oregon State University

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 5 - Transport and Network Layers TCP/IP (Part 1)Dr. V.T. RajaOregon State University Chapter Objectives: • Understand primary functions of transport and network layers • Understand the “big picture” • Five-layer network model

  2. Examples of Transport/Network Layer Protocols • Examples: • Two Popular transport/network layer protocols • Example of transport/network layer protocol not used much in North America • Protocol for IBM compatible hardware/software and mainframe environments • Why TCP/IP? • What is the expansion of TCP/IP? • What are the major functions of TCP/IP?

  3. TCP • Main functions of TCP: Packetizing • What is packetizing? • At sender • At final destination

  4. TCP • Thought Questions (with regard to the “big picture”): • With what layer(s) does TCP interface in the 5-layer model? • If more than two computers are involved in message transmission, then is TCP involved in all the computers? In how many computers is TCP involved?

  5. TCP (Continued) • Some details on TCP header: • TCP header containing 24 bytes (192-bit header) of overhead information is enclosed along with user’s data: • Examples of overhead information added: • Source and destination address • Packet sequence number • Thought Question (with regard to the “big picture”): • Didn’t the data link layer already have the source and destination address specified in the DLH? Is TCP duplicating this function of DL?

  6. Port Identifiers • Source Port IDs refer to software used at application layer of source computer • Destination Port IDs refer to software to be used at application layer of final destination computer • With TCP/IP, each application layer software has a unique port address/identifier. • Every standard application layer software on the Internet has a predefined (default) port number.

  7. Port Identifiers • Thought Questions: • Could network managers choose not to use the default port numbers? • Why would a network manager not want to use a default port number?

  8. Internet Protocol (IP) • What are IP’s main functions? • Main functions: • Thought Question: • Is IP involved only at sender’s or final destination computers? Or is it involved in all interim computers that take part in the message routing as well?

  9. IP (Continued) • Different versions of IP • IPv4 and IPv6 • IP creates a IP header • IP header contains (among other overhead information) source and destination address! • Network layer (IP) address • Examples?

  10. IP (Continued) • Thought Question (with regard to the “big picture”): • In what order are the different headers combined with the user data packet? • If DL protocol is Ethernet, and NL protocol is TCP/IP, then what is the maximum packet size for user data? Assume DLH and DLT sizes sum to 26 bytes, TCP header size is 24 bytes, and IP header size is 24 bytes as well. • Sample content in each header?

  11. IPv4 AddressingICANN • Every computer participating on the Internet should use approved network layer (IP) addresses. • IP Addresses are approved by ICANN or one of several private companies authorized by ICANN • Internet Corporation for Assigned Names and Numbers • http://www.icann.org/ • FAQ on registration of IP addresses • http://www.internic.net/faqs/

  12. IPv4 AddressingDotted Decimal Notation • Dotted Decimal Notation • Four bytes (8 bits = 1 byte) per address • Each byte separated by a dot • Each byte expressed in decimal notation • Example: • Dotted Decimal Notation: 192.16.224.254 • Binary Notation?: • What is the minimum decimal value any byte can be assigned? • What is the maximum decimal value any byte can be assigned?

  13. IPv4 AddressingClass Based Address Structure • IP Addresses were grouped into classes: • Classes A, B, C, D and E • Classes A, B and C - used for commercial purposes • The class of the address - determined by examining the first byte of the address and mapping it to a range of values as follows: • Class A: first byte is in the range 1 – 127 • Class B: first byte is in the range 128 - 191 • Class C: first byte is in the range 192 - 223

  14. IPv4 AddressingNetwork and Host Addresses • Each IP address has two parts: • Network Address (assigned/approved by ICANN) • Host Address (assigned by host organization) • For a Class A IP address, the first byte is assigned/approved by ICANN • Class A: Network.Host.Host.Host • For a Class B IP address, the first two bytes are assigned/approved by ICANN • Class B: Network.Network.Host.Host • For a Class C IP address, the first three bytes are assigned/approved by ICANN • Class C: Network.Network.Network.Host • Restrictions for Host address: IP address cannot end in 0 or 255

  15. IPv4 Addressing (Continued)Subnets • Subnets • Part of a network that is logically grouped by IP addresses • Example: • Suppose ICANN assigned OSU a set of IP addresses as follows: 128.193.x.x • OSU assigns the host part of the IP address • 128.193.75.x; (CS subnet) • 128.193.76.x; (BSG subnet) • 128.193.76.x; (COB subnets) • Can have one subnet for faculty: 128.193.76.____ (faculty subnet) • Can have one subnet for IS staff: 128.193.76.____ (IS staff subnet) • Every computer in a TCP/IP network is assigned a subnet mask by the host organization – Why?

  16. IPv4 AddressingSubnet Masks • Subnet Mask Applications:

  17. Subnet mask applications (Continued)Determining if sender and receiver are on same subnet • How to determine if sender and receiver are on the same subnet? • Refer to algorithm provided on separate handout • Examples: • Are computer A (IP address: 128.193.78.3) and computer B (IP address: 128.193.78.250) on the same subnet? • Do you have sufficient information to answer the above mentioned question? • Class Participation Exercise # 2 (Question # 1)

  18. Subnets (Continued)Partial Subnetting • Subnet mask default values • Example: Class Participation Exercise # 2 (Question # 2) • Partial Subnetting • Subnet masks can also take values other than 0 or 255 • Example 1: • Subnet mask: 255.255.255.224 • Sender’s IP: 120.192.40.16 • Receiver’s IP: 120.192.40.30 • Example 2: Class Participation Exercise # 2 (Question # 3)

  19. Subnet Mask Applications (Continued) • Subnet mask helps: • Determine if sender and receiver are on same subnet • Determine maximum number of computers per subnet • Determine maximum number of subnets possible • Example 1: Background: Assume OSU is assigned a Class C address, and assume that the network manager at OSU has selected the subnet mask value as: 255.255.255.248 Question: Find (a) maximum # of computers per subnet and (b) maximum # of subnets possible

  20. Number of Subnets and Number of Computers Per SubnetClass C Addresses

  21. Class Participation Exercise # 2 – Question # 5 • Background Info: A firm has been assigned a class B address by ICANN. Based on an estimation of future network growth in the firm, the administration plans to have 30 different subnets, and about 2040 computers in each subnet. • Question:What subnet mask value should the network manager use in order to satisfy the planning needs (of the administration) as specified above?

More Related