1 / 43

Road-Based Multipath Routing With Resilient Video Streaming for Urban VANETs

Road-Based Multipath Routing With Resilient Video Streaming for Urban VANETs. 指導教授:王國禎 博士 學生:鍾昆佑 國立交通大學網路工程研究所 行動計算與寬頻網路實驗室. Outline. Introduction Background Design approach Simulation and discussion Conclusion References. Introduction.

saad
Download Presentation

Road-Based Multipath Routing With Resilient Video Streaming for Urban VANETs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Road-Based Multipath Routing With Resilient Video Streaming for Urban VANETs 指導教授:王國禎 博士 學生:鍾昆佑 國立交通大學網路工程研究所 行動計算與寬頻網路實驗室

  2. Outline • Introduction • Background • Design approach • Simulation and discussion • Conclusion • References

  3. Introduction • It is commonly acknowledged that Vehicular Ad Hoc Networks (VANETs) are unsuited to support multimedia traffic. • Wireless links would be broken frequently because of high mobility in VANET.

  4. Introduction In urban VANET , each vehicle moves in constrained areas independently. Due to the error-prone characteristic of wireless communication, routing packets over multiple hops results in packet loss and causes poor quality of reconstructed video at the receiver

  5. Introduction Ad-hoc on-demand distance vector(AODV) [1] and dynamic source routing(DSR) [2] are two most widely studied on-demand ad hoc routing protocol The traditional node-centric view of the route leads to frequent broken routes in the presence of VANETs’ high mobility as illustrated in Figure 1 [3]

  6. Introduction

  7. Introduction One alternative approach is offered by geographical routing protocols, e.g., greedy–face–greedy (GFG) [4], greedy other adaptive face routing (GOAFR) [5] It can not always find the route to destination as illustrated in Figure 2

  8. Introduction

  9. Introduction There are many single path routings, which need new route discovery whenever a path breaks [6] has proofed multiple path can improve the packet delivery ratio if there is no interference.

  10. Introduction PA andPB arepacket delivery ratio without interference for each single path Psin: Single path routing delivery ratio Pmulti : Multiple path routing delivery ratio

  11. Introduction Psin=Max{PA,PB} (1) Pmulti=1-(1-PA)(1-PB)=PA+PB-PAPB (2) PA ≤ 1 and PB ≤ 1 , PAPB ≤ Min{PA,PB} (3) Pmulti ≥ Max{PA,PB} ≥ Psin (4)

  12. Introduction Multiple path can classify two types : node-disjoint and link-disjoint [7] has proofed node-disjoint is better than link-disjoint on packet delivery ratio

  13. Introduction

  14. Introduction p : probability of route broken Pi : number of i common node Path1 has m nodes and Path2 has n nodes

  15. Introduction P0=p[Path1] x p[Path2]=(1-(1-p)m) x (1-(1-p)n) (4) P1=p[Path1] x p[Path2]=(1-(1-p)m-1) x (1-(1-p)n-1)+p (5) Because P1 -P0 ≥ 0 , so we can prove Pk ≥Pk-1 ≥ … ≥ P0 by mathematical induction

  16. Introduction • We propose a road-based multipath routing(RBMR) with resilient video streaming scheme that integrates flexible macroblock ordering (FMO) and multiple description coding (MDC) • Improve video streaming quality • Recover lost packets with error resilience via FMO and MDC • Improve the reliability of routing paths • Maintain a modified vehicle persistence score (VPS) [8] to determine the stability of a node

  17. Background • Modified vehicle persistence score (VPS) • VPS table • VPS table entry<ID, position, segment, direction, VPS> • ID: the neighbor’s identifier • position: the GPS coordinate (x, y), which stands for the neighbor’s position • segment : the neighbor is located • direction: the neighbor’s moving direction • VPS: the value used to select relay node

  18. Background • VPS maintains • When vehicle received a HELLO message , it searched its VPS table • If the neighbor’s ID can be found in the VPS table, the vehicle increasesneighbor's VPS by 1. • If identifier can not be found in the VPS table, the vehicle adds the neighbor’s information to the VPS table, and initializes the neighbor’s VPS to 1.

  19. Background (a) VPS values are initialized when receiving a HELLO message (b) VPS values are increased when receiving a HELLO message An example of VPS table

  20. Background • Flexible Macroblock Ordering (FMO) [9] • One of error resilience techniques defined by the H.264/AVC specifications • An image is divided into slice groups, and each slice group can be divided into several slices, consisting of a sequence of macroblocks that belong to the same slice group • The power of FMO depends on how the macroblocks are ordered

  21. Background

  22. Background • FMO type[9]

  23. Background Multiple description coding (MDC) segments a single stream into n substreams which called descriptions. MDC is used to supply error resilience to media streams.

  24. Design approach - RBMR • Four stages of the proposed road-based multipath routing (RBMR) scheme for resilient video streaming • Video encoding stage • Route discovery stage • Data transfer stage • Video decoding stage

  25. Design approach – RBMR

  26. RBMR – Video encoding stage • Video encoding stage • Before a sender starts transmitting to a receiver, it encodes the row video stream with FMO type 1, splitting the video streaming into multiple slices for error resilience at the receiver

  27. RBMR – Video encoding stage

  28. RBMR – Route discovery stage

  29. RBMR – Route discovery stage

  30. RBMR – Route discovery stage Block ID recorded in the RREQ header

  31. RBMR – Route discovery stage RREP is sent by the reverse block ID

  32. RBMR – Data transfer stage • Relay nodes selection • Select relay nodes from the VPS table according to the data stored in the VPS table • Data used for selection • segment: used to choose relay nodes which located in the next segment of the header. • direction : used to choose relay nodes which moved toward the receiver. • VPS: used to choose relay node which has the highest.

  33. RBMR – Data transfer stage

  34. RBMR– Video decoding phase • Video decoding phase • After a receiver receives all packets transmitting from a sender, it decodes and creates a reconstructed video stream

  35. Simulation and discussion Packet delivery ratio: the number of data packets successfully delivered to the receiver divided by the total number of data packets generated by the sender

  36. Simulation and discussion (cont.) Routing overhead: when we transfer a packet, how many control messages we need to send.

  37. Simulation and discussion (cont.) Simulation settings for NS2 [11]

  38. Simulation and discussion (cont.) Simulation settings for VanetMobiSim [4, 5]

  39. Simulation and discussion (cont.) Delivery ratio under different numbers of vehicles

  40. Simulation and discussion (cont.) Routing overhead under different numbers of vehicles

  41. Conclusion We propose road-based multipath routing for Urban VANETs The proposed RBMR improves the delivery ratio by7% and control overhead by 30% compared with AOMDV Simulation results show that the proposed RBMR performs well in city environments

  42. References • H. Hartenstein and K. P. Laberteaux, "A tutorial survey on vehicular ad hoc networks," Communications Magazine, IEEE, vol. 46, pp. 164-171, 2008. • M.H. Wei, K.C. Wang, and I.L. Hsieh “A reliable routing scheme based on vehicle moving similarity for VANETs,” in Proc. IEEE TENCON, 2011. • S. Wenger, “H2.46/AVC over IP,” IEEE Trans. on Circuits and Syst. for Video Technol., vol. 13, no. 7, pp. 645-656, 2003. • N. Qadri, M. Altaf, M. Fleury, M. Ghanbari, and H. Sammak, "Robust Video Streaming over an Urban VANET," in Proc, International Conference on Wireless and Mobile Computing, Networking and Communications, 2009. WIMOB 2009. IEEE, 2009, pp. 429-434. • N. N. Qadri, M. Fleury, and M. Ghanbari, "Approaching P2P communication in a vehicular ad hoc network," in IEEE 34th Conference on Local Computer Networks, pp. 695-701 2009. • N. Qadri, M. Fleury, M. Altaf, B. R. Rofoee, and M. Ghanbari, "Resilient P2P multimedia exchange in a VANET," in Wireless Days (WD) , pp. 1-6, 2009 2nd IFIP, 2009. • N. N. Qadri, M. Fleury, M. Altaf, and M. Ghanbari, "Multi-source video streaming in a wireless vehicular ad hoc network," Communications, IET, vol. 4, pp. 1300-1311. • F. Soldo, C. Casetti, C.-F. Chiasserini, P. Chaparro, “Streaming Media Distribution in VANETs,” in Proc, Global Telecommunications Conference, pp. 1-6, 2008.

  43. References W. Shu, P. Wang, A. Guo, X. Wang, F. Liu, “Enhanced GPSR using Neighbor-Awareness position Update and Beacon-assist Geographic Forwarding in vehicular ad hoc networks,” in proc, Intelligent Vehicles Symposium, pp. 1143-1147, 2009 J. Nzouonta, N. Rajgure, A. Guiling Wang, C. Borcea, “VANET Routing on City Roads Using Real-Time Vehicular Traffic Information ,” in Transactions Vehicular Technology pp. 3609 - 3626, 2009 “The network simulator (NS2),” [Online]. Available: http://www.isi.edu/nsnam/ns/.

More Related