1 / 12

Loading a Sensor Plug-In

Loading a Sensor Plug-In. 1 - From the BTAC Home Screen SELECT the Contact Name, i.e. bfd.samsung4.0 at the TOP of the SCREEN. 1. Loading a Sensor Plug-In. A DROP DOWN MENU will appear. 1 – SELECT the SENSOR Icon. 1. Loading a Sensor Plug-In. The BLUEFORCE SENSOR PLUG-IN Page will appear.

sachi
Download Presentation

Loading a Sensor Plug-In

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Loading a Sensor Plug-In 1 - From the BTAC Home Screen SELECT the Contact Name, i.e. bfd.samsung4.0 at the TOP of the SCREEN 1

  2. Loading a Sensor Plug-In A DROP DOWN MENU will appear. 1 – SELECT the SENSOR Icon 1

  3. Loading a Sensor Plug-In The BLUEFORCE SENSOR PLUG-IN Page will appear. 1 – SELECT the All TAB 1

  4. Loading a Sensor Plug-In SCROLL through the list of Sensor Plug-Ins until the desired Sensor Plug-In is located. 1 – SELECT the GREEN Arrow to INSTALL the desired Sensor A Message will appear saying “Plug-In Installed Successfully”, then disappear. 2 – A RED Trash Can will appear next to the Sensor plug-In name. If the RED Trash Can is SELECTED, the Sensor Plug-In will be DELETED. 3 – SELECT the Sensor Plug-In Name to configure the Sensor, if needed. 1 2 3

  5. Loading a Sensor Plug-In 1 – SELECT Edit 1

  6. Loading a Sensor Plug-In 1 – SELECT Configure Tab

  7. Loading a Sensor Plug-In 1 – SELECT “SDCARD” Folder

  8. Loading a Sensor Plug-In 1 – SELECT “BTAC_ReceivedFiles” Folder

  9. Loading a Sensor Plug-In 1 – SELECT the “Select” Tab

  10. Loading a Sensor Plug-In 1 – CHECK the BOX to “Start Sensor when BTAC starts”. 2 – SELECT “Done”

  11. Loading a Sensor Plug-In 1 – SELECT “Sensor is off” to turn Sensor ON.

  12. Loading a Sensor Plug-In 1 – Sensor is now ENABLED 2 – SELECT the RETURN Button twice to RETURN to the HOME PAGE

More Related