OCAP chassis parts ( kunshan ) co.,ltd 欧凯普底盘配件 ( 昆 山 ) 有限公司

1. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Dana – OCAP Meeting in Wuxi 2010 -09 -07

2. Torque issue current status update--OCAP current containment Plan, and history inspection report as required;Dana RS2 requirement OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Problem description: Dana customer found 5pcs vehicle have abnormal noise, They send defective part to OCAP Italy for analysis.

3. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Analysis root cause: Report from OCAP Italy after cutting the defective part returned part Root cause: lower bushing out of spec. Test performed in Kunshan, reproducing defects, showed that main root cause is lower bushing NO defective noisy tie rods have been given to OCAP group for analysis

4. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Corrective action : Make standard working instruction for assembly Change lower bush supplier to India from local supplier Improvement incoming inspection 100% check torque on assembly line and X-R analysis Grease dispensermachine instead of manual control

5. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Detail information about corrective action. Establish assembly line standard working instruction. Please see attachment .

6. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 2. Lower bush supplier change: We received lower bush supplier to India instead of local supplier from April 26th 2010. We start use them from Batch No.B677. Shipping date is May 18th 2010

7. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 3.Improve incoming inspection standard We have updated some parts incoming inspection report according to OCAP Indian’s standard. See attachment as example.

8. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 4.1 Verified our measuring system is valid 4.2 100% check torque on assembling line and record data for analysis. See attachment.

9. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 5. Improve grease filling equipment instead of manual control, Under investment. For short solution, Make special instruction for assembling line operator. See right picture:

10. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 RS1 document as attachment

11. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 RS2 requirement from Dana All issues found and listed in OISR have been demonstrated under control No occurrences for those issues in last 4 months Cut sealing boot, mentioned in the list, has been evidenced has not OCAP internal problem

12. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Dana material handling

13. Business impact on potential replacement required in Dana and Customer OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 OCAP has clearly provide information concerning potential impact on tie rods due to defective bushings. There should be no business impacts , because OCAP considers there are no condition for recall campaign.

14. OCAP chassis parts (kunshan)co.,ltd欧凯普底盘配件( 昆 山 ) 有限公司 Thank you!