1 / 17

LETS HEAR IT FOR CONES !

LETS HEAR IT FOR CONES !. FACTS ABOUT CONES. They are everywhere Used in many ways Low-tech – snow cone cups, paper hats, etc. High-tech – rocket nose cones Used by celebrities like: Dan Aykroyd Madonna. You, too, can learn to make cones !. “If I can do it, anyone can!”.

sagira
Download Presentation

LETS HEAR IT FOR CONES !

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LETS HEAR ITFORCONES !

  2. FACTS ABOUT CONES • They are everywhere • Used in many ways • Low-tech – snow cone cups, paper hats, etc. • High-tech – rocket nose cones • Used by celebrities like: • Dan Aykroyd • Madonna

  3. You, too, can learn to make cones ! “If I can do it, anyone can!” Quote does not belong to Al Gore

  4. Get ready for . . . CONE ENCOUNTERS OF THE WORST KIND

  5. RIGHT CONE WRONG CONE (OBLIQUE) THE “RIGHT” CONE

  6. CONE PATTERN

  7. VERTEX VERTEX SLANT HEIGHT B SLANT HEIGHT B SLANT HEIGHT A SLANT HEIGHT A PATTERN ANGLE C PATTERN CONE ? BASE RADIUS R CONE & PATTERN ATTRIBUTES

  8. GENERAL EQUATION: BASE RADIUS SLANT HEIGHT PATTERN ANGLE = 360° SPECIFIC EQUATION: 3.25” 3.25” 6” 1.88” 6” 6” C = 360° 112.8° 1.88” PATTERN ANGLE CALCULATION EXAMPLE

  9. TAB CONSTRUCTINGTHE PATTERN

  10. UVSC SITECONE PATTERNDEVELOPMENT DEMONSTRATION

  11. SUMMARY • CONSTRUCTING CONES • Skills needed: • Hand-eye coordination • Knowledge of basic algebra • Data needed: • Base radius of desired cone • Slant height of desired cone • Tools needed: • Ruler, compass, and pencil, or . . . • CAD system • Paper, sheet metal, etc. • Appropriate cutting tools

  12. DEFINITION:contestn. from the ancient atlantean words Con (cone) and Test (test), meaning “cone test”. So, here is your “CONTEST”

  13. A right cone has abase circumferenceof 18.85 inches,and a slant heightof 9 inches. What is the central angle of its flat pattern?

  14. CHOICES: • 60 degrees • 180 degrees • 141.4 degrees • None of the above

  15. ANSWER:D. None of the above Correct answer is: 120 DEGREES (1/3 of a circle)

  16. CONGRATULATIONS! You are now an official CONEHEAD! Go consume mass quantities

  17. CREDITS Producer: Dave “Little Finger” Manning Director: Darin “Big Finger” Taylor ELK MARBLE STUDIOS Copywrong 2006 all wrongs reserved

More Related