1 / 17

CHAPTER 22: MATERIALS SELECTION ECONOMIC, ENVIRON., & DESIGN ISSUES

CHAPTER 22: MATERIALS SELECTION ECONOMIC, ENVIRON., & DESIGN ISSUES. ISSUES TO ADDRESS. • Price and availability of materials. • How do we select materials based on optimal performance?. • Applications: --shafts under torsion --bars under tension --plates under bending

saima
Download Presentation

CHAPTER 22: MATERIALS SELECTION ECONOMIC, ENVIRON., & DESIGN ISSUES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 22: MATERIALS SELECTIONECONOMIC, ENVIRON., & DESIGN ISSUES ISSUES TO ADDRESS... • Price and availability of materials. • How do we select materials based on optimal performance? • Applications: --shafts under torsion --bars under tension --plates under bending --materials for a magnetic coil. 1

  2. PRICE AND AVAILABILITY • Current Prices on the web(a): --Short term trends: fluctuations due to supply/demand. --Long term trend: prices will increase as rich deposits are depleted. • Materials require energy to process them: --Cost of energy used in processing materials ($/GJ)(g) --Energy to produce materials (GJ/ton) Al PET Cu steel glass paper 237 (17)(b) 103 (13)(c) 97 (20)(b) 20(d) 13(e) 9(f) elect resistance propane natural gas oil 25 11 9 8 a http://www.statcan.ca/english/pgdb/economy/primary/prim44.htm a http://www.metalprices.com b http://www.automotive.copper.org/recyclability.htm c http://members.aol.com/profchm/escalant.html d http://www.steel.org.facts/power/energy.htm e http://eren.doe.gov/EE/industry_glass.html f http://www.aifq.qc.ca/english/industry/energy.html#1 g http://www.wren.doe.gov/consumerinfo/rebriefs/cb5.html Energy using recycled material indicated in green. 2

  3. RELATIVE COST, $, OF MATERIALS • Reference material: --Rolled A36 plain carbon steel. • Relative cost, $, fluctuates less over time than actual cost. Based on data in Appendix C, Callister, 6e. AFRE, GFRE, & CFRE = Aramid, Glass, & Carbon fiber reinforced epoxy composites. 3

  4. STIFF & LIGHT TENSION MEMBERS • Bar must not lengthen by more than d under force F; must have initial length L. -- Stiffness relation: -- Mass of bar: (s = Ee) • Eliminate the "free" design parameter, c: minimize for small M specified by application • Maximize the Performance Index: (stiff, light tension members) 4

  5. STRONG & LIGHT TENSION MEMBERS • Bar must carry a force F without failing; must have initial length L. -- Strength relation: -- Mass of bar: • Eliminate the "free" design parameter, c: minimize for small M specified by application • Maximize the Performance Index: (strong, light tension members) 5

  6. STRONG & LIGHT TORSION MEMBERS • Bar must carry a moment, Mt ; must have a length L. -- Strength relation: -- Mass of bar: • Eliminate the "free" design parameter, R: specified by application minimize for small M • Maximize the Performance Index: (strong, light torsion members) 6

  7. DATA: STRONG & LIGHT TENSION/TORSION MEMBERS grain Increasing P for strong torsion members Strength, (MPa) s f 4 10 Ceramics Cermets 3 10 PMCs Steels || grain Metal 2 10 alloys Adapted from Fig. 6.22, Callister 6e. (Fig. 6.22 adapted from M.F. Ashby, Materials Selection in Mechanical Design, Butterworth-Heinemann Ltd., 1992.) wood Polymers 10 Increasing P for strong tension members 1 slope = 3/2 slope = 1 0.1 0.1 1 10 3 0 3 r Density, (Mg/m ) 7

  8. DATA: STRONG & LIGHTBENDING MEMBERS grain • Maximize the Performance Index: Increasing P for strong bending members 4 10 Ceramics Cermets 3 10 PMCs Steels Strength, sf (MPa) || grain Metal 2 10 Adapted from Fig. 6.22, Callister 6e. (Fig. 6.22 adapted from M.F. Ashby, Materials Selection in Mechanical Design, Butterworth-Heinemann Ltd., 1992.) alloys wood Polymers 10 1 slope = 2 0.1 0.1 1 10 3 0 3 Density, (Mg/m ) r 8

  9. DETAILED STUDY I: STRONG, LIGHT TORSION MEMBERS • Maximize the Performance Index: • Other factors: --require sf > 300MPa. --Rule out ceramics and glasses: KIc too small. • Numerical Data: material CFRE (vf=0.65) GFRE (vf=0.65) Al alloy (2024-T6) Ti alloy (Ti-6Al-4V) 4340 steel (oil quench & temper) P (MPa)2/3m3/Mg) 73 52 16 15 11 r (Mg/m3) 1.5 2.0 2.8 4.4 7.8 tf (MPa) 1140 1060 300 525 780 Data from Table 6.6, Callister 6e. • Lightest: Carbon fiber reinf. epoxy (CFRE) member. 9

  10. DETAILED STUDY I: STRONG, LOW COST TORSION MEMBERS • Minimize Cost: Cost Index ~ M$ ~ $/P (since M ~ 1/P) • Numerical Data: ($/P)x100 112 76 93 748 46 material CFRE (vf=0.65) GFRE (vf=0.65) Al alloy (2024-T6) Ti alloy (Ti-6Al-4V) 4340 steel (oil quench & temper) P (MPa)2/3m3/Mg) 73 52 16 15 11 $ 80 40 15 110 5 Data from Table 6.7, Callister 6e. • Lowest cost: 4340 steel (oil quench & temper) • Need to consider machining, joining costs also. 10

  11. DETAILED STUDY II: OPTIMAL MAGNET COIL MATERIAL • Background(2): High magnetic fields permit study of: --electron energy levels, --conditions for superconductivity --conversion of insulators into conductors. • Largest Example: --short pulse of 800,000 gauss (Earth's magnetic field: ~ 0.5 Gauss) • Technical Challenges: --Intense resistive heating can melt the coil. --Lorentz stress can exceed the material strength. • Goal: Select an optimal coil material. Pulsed magnetic capable of 600,000 gauss field during 20ms period. Fractured magnet coil. (Photos taken at NHMFL, Los Alamos National Labs, NM (Apr. 2002) by P.M. Anderson) (1) Based on discussions with Greg Boebinger, Dwight Rickel, and James Sims, National High Magnetic Field Lab (NHMFL), Los Alamos National Labs, NM (April, 2002). (2) See G. Boebinger, Al Passner, and Joze Bevk, "Building World Record Magnets", Scientific American, pp. 58-66, June 1995, for more information. 11

  12. LORENTZ STRESS & HEATING • Applied magnetic field, H: H = N I/L • Lorentz "hoop" stress: • Resistive heating: (adiabatic) elect. resistivity temp increase during current pulse of Dt specific heat Magnetic field points out of plane. 12

  13. MAGNET COIL: PERFORMANCE INDEX • Mass of coil: • Applied magnetic field: H = N I/L M = rdAL • Eliminate "free" design parameters A, I from the stress & heating equations (previous slide): --Stress requirement --Heating requirement specified by application specified by application Performance Index P1: maximize for large H2/M Performance Index P2: maximize for large Ht1/2/M 13

  14. MAGNET COIL: COST INDEX • Relative cost of coil: • Applied magnetic field: $ = $ M H = N I/L • Eliminate M from the stress & heating equations: --Stress requirement --Heating requirement specified by application specified by application Cost Index C1: maximize for large H2/$ Cost Index C2: maximize for large Ht1/2/$ 14

  15. INDICES FOR A COIL MATERIAL • Data from Appendices B and C, Callister 6e: Material 1020 steel (an) 1100 Al (an) 7075 Al (T6) 11000 Cu (an) 17200 Be-Cu (st) 71500 Cu-Ni (hr) Pt Ag (an) Ni 200 units sf 395 90 572 220 475 380 145 170 462 MPa rd 7.85 2.71 2.80 8.89 8.25 8.94 21.5 10.5 8.89 g/cm3 $ 0.8 12.3 13.4 7.9 51.4 12.9 1.8e4 271 31.4 -- cv 486 904 960 385 420 380 132 235 456 J/kg-K re 1.60 0.29 0.52 0.17 0.57 3.75 1.06 0.15 0.95 W-m3 P1 50 33 204 25 58 43 7 16 52 sf/rd P2 2 21 15 5 3 1 19 <1 2 (cv/re)0.5 rd C1 63 3 15 3 1 3 <1 <1 2 P1/$ C2 2.5 1.7 1.1 0.6 <0.1 <0.1 <0.1 <0.1 <0.1 P2/$ Avg. values used. an = annealed; T6 = heat treated & aged; st = solution heat treated; hr = hot rolled • Lightest for a given H: 7075 Al (T6) P1 • Lightest for a given H(Dt)0.5: 1100 Al (an) P2 C1 • Lowest cost for a given H: 1020 steel (an) • Lowest cost for a given H(Dt)0.5: 1020 steel (an) C2 15

  16. SUMMARY • Material costs fluctuate but rise over the long term as: --rich deposits are depleted, --energy costs increase. • Recycled materials reduce energy use significantly. • Materials are selected based on: --performance or cost indices. • Examples: --design of minimum mass, maximum strength of: • shafts under torsion, • bars under tension, • plates under bending, --selection of materials to optimize more than one property: • material for a magnet coil. • analysis does not include cost of operating the magnet. 16

  17. ANNOUNCEMENTS Reading: Core Problems: Self-help Problems: 0

More Related