1 / 17

10/11 CLI 說明 : ALU 常用指令簡介 James

10/11 CLI 說明 : ALU 常用指令簡介 James. Poke commands . Step1: Right click NE and select Poke Commands -> TI Wizard. Step1: Scroll down the command list to select command . . show NE alarm op:cell *** , extern. Acknowledgement from Network element for command op:cell 969,extern is PF

salene
Download Presentation

10/11 CLI 說明 : ALU 常用指令簡介 James

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 10/11 CLI 說明 : ALU 常用指令簡介 • James

  2. Poke commands Step1: Right click NE and select Poke Commands -> TI Wizard

  3. Step1: Scroll down the command list to select command .

  4. show NE alarm op:cell*** , extern Acknowledgement from Network element for command op:cell 969,extern is PF M 19 REPT:CELL 969 ASSEMBLAGE 1 ALARM SCANNING SCAN POINT: ALARM GROUP 2, ALARM ID 7 ALARM: SMR MINOR ALARM 告警陳現 STATE: OFF NORMAL 10/09/13 Wed 17:19:44 #034018 M 20 OP:CELL 969 EXTERN, COMPLETED 10/09/13 Wed 17:20:07 #034119

  5. 查詢基站狀態 -1 op:cell*** Acknowledgement from Network element for command op:cell 815 is IP all specified cells ACT 35 OP:CELL 815 DL 0 CONNECTED, RCS ACTIVE data link 0 : connected狀態，對應的RCS為active狀態 10/07/13 Mon 17:35:51 #751738 35 OP:CELL 815 DL 1 CONNECTED, RCS STANDBY data link1 : connected狀態，對應的RCS為standby狀態 10/07/13 Mon 17:35:51 #751739 M 35 OP:CELL 815 CDM 1, CRC, ACTIVE CDM1 一般為 1X服務，其CRC無線控制器是啟動的狀態 CHILD DO CRC 3 SIGNALING LINK ACTIVE ON CRC 1, SHARING WITH CRC 3信令鏈路啟用於CRC 1(1X)，同時與CRC 3(EVDO)共享 MANU NEG, 100 MBPS, FULL DUPLEX, VLAN ID 1612CDM 1的CRC上的Ethernet狀態為100Mbps/全雙工/vlanID=1612 10/07/13 Mon 17:35:51 #751740

  6. 查詢基站狀態 -2 M 35 OP:CELL 815 CDM 3, CRC, ACTIVE PARENT CRC 1 SIGNALING LINK ACTIVE MANU NEG, 100 MBPS, FULL DUPLEX, VLAN ID 2612 DO TRAFFIC LINK ACTIVE 10/07/13 Mon 17:35:51 #751741 M 35 OP:CELL 815 CDM 1, 3, CBR 1, 10MHzI, ACTIVEDIV NORMAL 10/07/13 Mon 17:35:51 #751742 M 35 OP:CELL 815 CDM 1, 3, CBR 2, 10MHzI, ACTIVECDM:1、3(1X&EVDO)所使用的 CBR 2基帶無線模組#2(beta扇區)為啟動 DIV NORMAL 分集接收正常 10/07/13 Mon 17:35:51 #751743 M 35 OP:CELL 815 CDM 1, 3, CBR 3, 10MHzI, ACTIVE DIV NORMAL 10/07/13 Mon 17:35:51 #751744 M 35 OP:CELL 815 CDM 3, CBR 4, 10MHzI, ACTIVE DIV NORMAL 10/07/13 Mon 17:35:51 #751745

  7. 查詢基站狀態 -3 M 35 OP:CELL 815 CDM 3, CBR 5, 10MHzI, ACTIVE DIV NORMAL 10/07/13 Mon 17:35:51 #751746 M 35 OP:CELL 815 CDM 3, CBR 6, 10MHzI, ACTIVE DIV NORMAL 10/07/13 Mon 17:35:51 #751747

  8. 重置TFU:RMV+RST RMV:CELL ***,TFU 1;UCL RST:CELL ***,TFU 1;UCL RMV:CELL 1059,TFU 1;UCL Acknowledgement from Network element for command RMV:CELL 1059,TFU 1;UCL is IP all specified cells ACT M 09 RMV:CELL 1059 TFU 1, COMPLETED 05/15/12 Tue 15:09:13 #191309 M 09 OP:CELL 1059 TFU 1, OOS, MANUAL, RMVD GPS INDT, OM INDT GPS狀態由normal變為iINDT 05/15/12 Tue 15:09:13 #191310 RST:CELL 1059,TFU 1;UCL Acknowledgement from Network element for command RST:CELL 1059,TFU 1;UCL is IP all specified cells ACT M 13 RST:CELL 1059 TFU 1, COMPLETED 05/15/12 Tue 15:13:55 #191685 M 13 OP:CELL 1059 TFU 1, ACTIVE GPS NORMAL, OM ONBOARD NORMAL GPS狀態恢復normal

  9. 查詢基站RSSI op:cell ***,cdm *,cbr * rssi OP:CELL 1046, CDM 1, CBR 2 RSSI顯示目前CDM 1(1X), CBR 2(第二扇區)目前的RSSI Acknowledgement from Network element for command OP:CELL 1046, CDM 1, CBR 2 RSSI is IP all specified cells ACT M 04 OP:CELL 1046 CDM 1, 3, CBR 2, ACTIVE DIV_IMB THRESHOLD: 5.0 ANTENNA DIVERSITY IMBALANCE = 主副集接收差異告警門限=5dBm RSSI RX1:-63.1dBm RSSI RX2: -68.3dBm 主集接收副集接收的強度，此例中基站”1046”的主副集相差5.2dBm故會報 告警 05/14/12 Mon 15:04:05 #088476

  10. 基站重啟(Reset Cell without restart RCS application in AP (stable clear)) INIT:CELL *** :SC Acknowledgement from Network element for command init:cell 1603:sc isOK **39 RCVRY:CELL 1603 PHASE STARTED, CP ALW, PH LVL SC, PH SRC MCRT 10/02/13 Wed 09:39:17 #390716 **43 RCVRY:CELL 1603 PHASE COMPLETED, CP ALW, PH LVL SC, PH SRC MCRT 10/02/13 Wed 09:43:14 #391756 Session activity timer has expired. Please close inactive OMC-RAN TICLI Acknowledgement from Network element for command init:cell 1782:sc isOK **33 RCVRY:CELL 1782 PHASE STARTED, CP ALW, PH LVL SC, PH SRC MCRT 10/08/13 Tue 10:33:46 #553120 **37 RCVRY:CELL 1782 PHASE COMPLETED, CP ALW, PH LVL SC, PH SRC MCRT 10/08/13 Tue 10:37:48 #554231 Session activity timer has expired. Please close inactive OMC-RAN TICLI • 基站重啟(Reboot Cell and it’s associated RCS in AP) • RST:RCS XXX • 新開基站必須使用這條命令重起RCS與基站

  11. 重置CBR :RMV+RST RMV:CELL ***,TFU 1;UCL RST:CELL ***,TFU 1;UCL 重置CCU :RMV+RST RMV:CELL ***,CDM *,CCU * ;UCL RST:CELL ***,CDM *,CCU * ;UCL CBR x — CDMA Baseband Radio (CBR) CCU x — CDMA Channel Unit (CCU) CRC x — CDMA Radio Controller (CRC) UCL Unconditionally remove the unit from service bypassing threshold checks. Acknowledgement from Network element for command RMV:CELL 1053,CDM 1,CBR 1;UCL is IP all specified cells ACT M 44 RMV:CELL 1053 CDM 1, 3, CBR 1, COMPLETED 05/11/12 Fri 17:44:12 #775813 M 44 OP:CELL 1053 CDM 1, 3, CBR 1, 10MHzI, OOS, MANUAL, RMVD RMV後CBR 1變成OOS TXPORT 1 DISABLED ASMB 1 TXAMP 1 ACTIVE ASMB 1 RXAMP 1 NORMAL TTLNA 1 NORMAL ASMB 1 RXAMP 2 NORMAL TTLNA 2 NORMAL DIV INDT 05/11/12 Fri 17:44:12 #775814

  12. 查看基站底躁 dump:cell ***;plm 9;carrier *,sector *   (下行信号) 9 — Total Output Power on Forward Link. Acknowledgement from Network element for command dump:cell 2387;plm 9;carrier 1,sector 1 is IP all specified cells ACT M 22 DUMP:CELL 2387 PLM 9 CARRIER: 1 SECTOR: 1 TOTAL OUTPUT POWER ON FORWARD LINK PART: 1 27 27 28 29 29 29 28 28 29 30 29 28 28 28 28 27 27 27 27 27 27 27 28 28 28 28 28 29 30 30 29 29 29 29 29 30 30 30 29 29 30 30 30 29 29 29 28 28 28 28 28 28 28 28 29 29 30 29 29 29 29 29 29 29 29 29 28 28 28 28 28 28 28 28 28 28 29 29 29 30 29 28 28 28 29 30 29 29 28 28 29 29 29 29 29 30 29 28 28 28 28 28 29 29 29 29 29 29 29 28 28 28 28 29 29 28 28 29 30 31 31 30 31 30 31 30 31 31 30 30 31 30 32 33 32 31 30 30 31 30 30 31 30 30 30 30 30 30 30 30 29 29 29 29 29 30 30 29 29 28 28 28 29 29 29 29 28 28 28 29 28 28 28 29 29 28 29 29 29 28 28 29 29 28 28 28 28 28 28 28 28 28 28 28 29 28 29 29 30 30 29 29 29 29 29 28 28 28 28 28 28 28 28 28 29 29 29 29 29 29 29 29 29 29 29 10/08/13 Tue 18:22:19 #054414

  13. dump:cell ***;plm 10;carrier *,sector * 10 — Noise Rise (Median and Delta Rise) Acknowledgement from Network element for command dump:cell 2387;plm 10;carrier 1,sector 1 is IP all specified cells ACT M 38 DUMP:CELL 2387 PLM 10 CARRIER: 1 SECTOR: 1 50TH PERCENTILE REVERSE LINK NOISE POWER -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.00dBm -84.00dBm -84.25dBm -82.00dBm -84.50dBm -84.25dBm -84.00dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.75dBm -84.75dBm -84.75dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.75dBm -84.75dBm -84.75dBm -84.75dBm -84.75dBm -84.75dBm -84.75dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.25dBm -84.50dBm -84.50dBm -84.50dBm -85.00dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.00dBm -84.00dBm -84.25dBm -84.25dBm -84.00dBm -84.50dBm -84.50dBm -84.50dBm -84.25dBm -84.00dBm -84.25dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.50dBm -84.25dBm -84.25dBm -84.00dBm -84.00dBm -84.00dBm -84.25dBm 10/08/13 Tue 18:38:50 #058469

  14. 查看基站線路狀態 (ES.....) EXC:CELL ***,CDM *,DS1 *,REPORT 1  (DS1 * --> 查看第幾條電路) Acknowledgement from Network element for command EXC:CELL 2387,CDM 1,DS1 1,REPORT 1 is IP all specified cells ACT M 43 EXC:CELL 2387,CDM 1,DS1 1,REPORT 1 CELL 2387,CDM 1,DS1 1,REPORT 1 DS1 1-UNEQUIPPED 10/08/13 Tue 18:43:15 #059559 Acknowledgement from Network element for command EXC:CELL 898,CDM 1,DS1 1,REPORT 1 is IP all specified cells ACT M 45 EXC:CELL 898,CDM 1,DS1 1,REPORT 1 CELL 898,CDM 1,DS1 1,REPORT 1 DS1 1-CRC IS OOS 10/08/13 Tue 18:45:57 #060234

  15. REPORT * 1 — Include only the current 15 minute, number of seconds into current interval, and 24 hour aggregate data. 2 — Include only the specified number-of-hour-shift in the past, in 15 minute increments. 3 — Include only the 24 hour data in 15 minute increments and 24 hour aggregate data. The number of seconds into current 15 minute interval shall also be specified. 4 — Current measured signal level, alarm, loop mode, state, substate, mode, framing, line coding, signaling, line build out, options, chain, clock source, clock priority.

  16. 基站PING-1X /DO exc:cell ***,cdm *,crc,ping IP,REPEAT g IX IP=***.193.***.***+1；DOIP:***.194.***.***+1 ；g = 1~ 5 1X Gateway(AGP)IP = ***.193.***.***+6 DO Gateway(AGP)IP = ***.194.***.***+6 EX: GN110010 : BTS 1X IP: 10.193.11.0 Acknowledgement from Network element for command exc:cell 130,cdm 1,crc,ping 10.193.11.1,REPEAT 1 is IP all specified cells ACT M 59 EXC:CELL 130, CDM 1, CRC, PING, COMPLETED EXTERNAL SOURCE IP = 10.193.11.1 INTERNAL SOURCE IP = 192.168.208.2 LINKID = 1 DESTINATION IP = 10.193.11.1 PAYLOAD SIZE = 56 BYTES SENT = 56 TIMEOUT = 5 PING HOST TIME STATUS 0 10.193.11.1 1 SUCCESS PACKETS: SENT 1, RCVD 1, LOST 0 (0%) ROUND TRIP TIMES: MIN 1, MAX 1, AVG 1 10/08/13 Tue 18:59:56 #063603

  17. 基站軟件狀態:察看基站內軟體詳細資訊 OP:cell ***, GENERIC Acknowledgement from Network element for command op:cell 130,generic is IP all specified cells ACT M 32 OP:CELL 130 CDM 3 GENERIC, FINISHED GENERIC ACTIVE STATUS F3713EBFA.12 NO GOOD F3713EBFA.38 YES GOOD F3712EBGA.00 NO GOOD 10/08/13 Tue 19:32:21 #071497 M 32 OP:CELL 130 CDM 1 GENERIC, FINISHED GENERIC ACTIVE STATUS F3713DBFA.38 YES GOOD F3712DBGA.00 NO GOOD F3713DBFA.12 NO GOOD 10/08/13 Tue 19:32:25 #071512 M 32 OP:CELL 130 GENERIC, COMPLETED 10/08/13 Tue 19:32:25 #071513

More Related