470 likes | 566 Views
Place Orion’s Belt Asterism on Blank Sheet. Cardinal orientation is not needed at the design stage. Double Line Length. Square Diagonal. Square Diagonal. Square Diagonal. Square Diagonal. Square Diagonal. G3. G3. G3. Place 45 ° Line From SE of G3 to point of origin. G3.
E N D
Place Orion’s Belt Asterism on Blank Sheet. Cardinal orientation is not needed at the design stage.
Double Line Length
Square Diagonal
Square Diagonal
Square Diagonal
Square Diagonal
Square Diagonal
G3 Place 45° Line From SE of G3 to point of origin.
G3 90°
G3 Double Line Length
G3 Square Diagonal
G3 Square Diagonal
G3 Square Diagonal
G3 G2
G3 G2
G3 G2 90° Double Line Length
G3 G2 Double Line Length
G3 G2 Square Diagonal
G3 G2 Square Diagonal
G3 G2 Square Diagonal
G3 G2 G1
Let’s Now Rotate the Plan so that the Gizamids Align with the Cardinal Directions
G3 G2 G1
N G3 G2 G1
N G3 G2 G1
N G3 G2 G1
N G3 G2 G1
Let’s Now Overlay Orion Geo-Stellar Fingerprint onto Map of Giza
G2 GSF Base (red square) is Slightly Offset from the Giza Plan… but does its Base Match the Giza Plan? Let us see….
As Above…. Al Nilam Offset from Diagonal
As Above…. So Below Al Nilam Offset from Diagonal G2 Offset from Diagonal
Once the plan has been designed it can then be scaled up and implemented on the ground at Giza using a simple X,Y Grid system