1 / 12

Madras download R6

Follow these steps to install the Infineon USB driver for Samsung Electronics devices and ensure successful flashing using Flash Tool. Start by removing the previous driver, then install Flash Loader utility. Next, connect the target device to the PC using a USB cable and execute the Hardware search wizard. Finally, use Flash Tool to add binary files, set communication drivers, and initiate the download process.

sandrasims
Download Presentation

Madras download R6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Madras download R6 SangKyu Yu S/W R&D Group – Europe SAMSUNG electronics 2010. 02. 08

  2. Before installing Infineon USB driver * We highly recommend the changing of USB Root Hub properties in Power Management  Uncheck “Allow the computer to turn off this device to save power”

  3. Driver Installation Guide[1] Step1. Remove previous USB driver - Run Remover.exe.

  4. [ Click OK button ] [ Click install button ] [ Click continue button ] [ Click Exit button ] Driver Installation Guide[2] Step2. Install Flash Loader utility USB Driver • Unzip FlashTool_E2_R6.zip • Run FlashTool_E2_R6\FlashUSB\Setup.exe. • Press 'Exit' to complete the Installation of 'Flash Loader utility driver'

  5. Driver Installation Guide[3] • Step3. • Connecting target without battery and PC via USB cable • PC executes the Hardware searching wizard automatically • Please set the path as “FlashTool_E2_R6\FlashUSB” • “USB flash loader utility” will be installed successfully.

  6. Driver Installation Guide[4] [ Click continue button ] [Click finish button ]

  7. Flash Tool Usage Guide[1] • Execute FlashTool_E2_R6\ FlashTool_E2.exe • Check the version v.4.41.3.35 [ FlashTool_E2_R6.zip ] [ FlashTool_E2.exe ] Flashtool version : v.4.41.3.35

  8. Flash Tool Usage Guide[2] a. Add binary files Browser for file * These can be added via “Drag & Drop”

  9. Flash Tool Usage Guide[3] * Download file list. [ Target Software ] - C3200XXXXX_bin.fls - C3200XXXXX_cds.fls [ Resource File ] - C3200XXXXX.dffs a a. Binary sequence should be set as a->b->c. b. This can be done automatically by checking ‘Customer Order’ b

  10. Flash Tool Usage Guide[4] a. Communication Driver shoud be set as Infineon USB Driver b. Choose the ‘Erase whole flash before download’ c. Click [Start] Button. d. Click [Start USB1] Button. d b a c

  11. Flash Tool Usage Guide[5] a. Connect the power-off target with battery via USB cable - The download will start automatically.

  12. Thank You

More Related