Which is the most common type of stainless steel used?

1. Which is the most common type of stainless steel used? Due to its wide variety of applications of stainless steel there are many types of stainless steel available in market. It’smainly used in construction and building works. It’s a material used in area where you need clean and sterile environment. The 4 different types of Stainless Steel 1. Austenitic Stainless Steel These are the most common type of Stainless steel used. Their microstructure is derived from the addition of Nickel, Manganese and Nitrogen. Austenitic steels form the largest portion of the global stainless-steel market and few of its versatile usages would be food processing equipment, kitchen utensils and medical equipment. While you cannot harden it with the heat, austenitic stainless steel has the useful property of retaining a helpful level of toughness and ductility when hardened to high strength. They are normally non-magnetic but usually exhibit some magnetic response depending on the composition and the work hardening of the steel. 2. Ferritic Stainless Steel As the name indicates Ferritic stainless steel is magnetic. These alloys can be hardened through cold working. These steels are based on chromium with small amount of carbon usually less than 0.10%. Based on small quantity of carbon, Ferritic steel has a similar microstructure to both carbon and low alloy. hey can have good ductility and formability, but high-temperature strengths are relatively poor when compared to austenitic grades. 3. Martensitic Stainless steel Similar to ferritic stainless steel, Martensitic stainless-steel bases on chromium with higher Carbon levels. Martensitic steel used where a moderate level of corrosion resistance and high strength is needed. Martensitic stainless steels, such as types 403, 410, 410NiMo and 420 are magnetic and heat-treatable. These Stainless steels are used in knives, cutting tools, as well as dental and surgical equipment. 4. Duplex stainless Steel According to microstructure Duplex stainless steel is half ferritic, duplex stainless steel has a higher strength than other types of stainless steel. It is also corrosion resistant. Primarily used in chemical plants and piping applications. “Super Duplex” stainless Steel also has enhanced resistance and strength to corrosion in comparison to regular Austenitic Stainless Steel. Duplex stainless steels typically contain approximately 22-25% chromium and 5% nickel with molybdenum and nitrogen. Duplexes have higher yield strength and greater stress corrosion cracking resistance to chloride than austenitic stainless steels.

2. Choosing a particular type of stainless steel will be depend on the application and your requirements like  Environment  Corrosion resistant or Corrosion  Tarnish and Oxidation resistance  Pitting  Crevice Corrosion There are many stainless-steel Manufacturers in India who manufacture different type of stainless steel. Santosh steel is one of the best options to get High quality Stainless steels. They also export different stainless-steel tubes and pipes. Visit http://santoshsteels.com/ for stainless steel pipe manufacturers in india, manufacturers of stainless steel pipes in india, industrial pipe manufacturers in india, stainless steel tubes manufacturer in india, s s pipe manufacturer in india, stainless steel pipe Suppliers in india, Suppliers of stainless steel pipes in india, industrial pipe Supplier in india, s.s pipe exporter in india, stainless steel pipes and tubes manufacturers in india, stainless steel pipes and tubes Supplier in india, stainless steel pipes and tubes exporter in india.