1 / 8

Cisco 600-601 Test Questions

Test4Direct is furnishing you with the Cisco 600-601 confirmed PDF question and answers. Preparing yourself for the Cisco 600-601 exam enables you to pass your exam in first strive. You can save your effort, time and money because Test4Direct is providing you PDF question and answers which totally simulates with the actual 600-601 Managing Industrial Networks with Cisco Networking Technologies (IMINS) exam. Test4Direct provide you 90 days free updates related to the Cisco 600-601 exam. We are also Providing you the free demo of 600-601 exam product and highly recommend you to download free demo before purchasing the Cisco 600-601 product. To view the details of money back guarantee policy and discount offers please visit the http://www.test4direct.com/600-601.html

sarahcostner29
Download Presentation

Cisco 600-601 Test Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 600-601 Managing Industrial Networks with Cisco Networking Technologies (IMINS) Demo Product To Buy Full Set of Exam Questions, Visit: http://www.test4direct.com/600-601.html

  2. Question: 1 A small manufacturing company has a Class C network address on the plant floor and needs to create five subnets, each accommodating 25 endpoints. Which subnet mask needs to be configured? A. 255.255.240.0 B. 255.255.255.128 C. 255.255.255.192 D. 255.255.255.224 E. 255.255.255.240 F. 255.255.255.248 Answer: D Question: 2 Refer to the exhibit. Host 3 on Network A is sending data to Host 8 on Network B. Which address is the default gateway of Host 3? A. the address of the switch interface that is connected to router interface Fa0/0 B. the address of the switch interface that is connected to router interface Fa0/1 C. the address of the host that is connected to Network A D. the address of the host that is connected to Network B E. the address of the router interface Fa0/0 F. the address of the router interface Fa0/1 Answer: E Question: 3 Which of the following correctly pairs the dotted decimal subnet mask with the correct number of binary bits that represent the subnet mask? A. 255.255.255.192 and /25 B. 255.255.255.248 and /28 C. 255.255.255.224 and /26 D. 255.255.255.248 and /27 E. 255.255.255.240 and /28 F. 255.255.255.240 and /16 Answer: E

  3. Question: 4 Refer to the exhibit. Which port should a PLC with IP address 192.168.3.65 be plugged into in order to communicate to the rest of the network? A. FastEthernet1/1 B. FastEthernet1/2 C. FastEthernet1/3 D. FastEthernet1/4 E. FastEthernet1/5 Answer: C Question: 5 Which option allows an EtherNet/IP I/O device to be safely installed where it is subject to water immersion? A. The device is rated IP20 and the power wiring is installed securely to the terminal block. B. The device is rated IP67 and a power cordset is used.

  4. C. The device is rated IP67 and immersed to 10 m. D. The device is rated IP20 and immersed to 10 m. Answer: B Question: 6 Refer to the exhibit. What are three traffic and interconnection requirements for the devices in the exhibit? (Choose three.) A. The EtherNet/IP drive connections are in a high-voltage area and need protection from electromagnetic noise, so shielded cable that is rated for 600 V is advised. B. EtherNet/IP devices such as the controller, drive, VoIP phone, and IP camera should be in the same VLAN. C. CIP traffic has the highest bandwidth requirement so it needs the highest QoS setting. D. EtherNet/IP drive traffic has high sensitivity to random drops, latency, and jitter. E. Real-time motion control and VoIP traffic can share the same VLAN with the proper QoS setting. F. IEEE1588 and PTP are important for ensuring real-time synchronization. Answer: A,D,F Question: 7 Exhibit:

  5. Which two statements are correct for a safe wiring installation to the terminal block of the switch or endpoint? (Choose two.) A. Insert a green ground wire into the terminal block that is marked RT for return. B. Verify that DC power is live and within 24 VDC voltage range before starting wiring. C. Verify that the DC power circuit includes an overcurrent protective device that limits the DC current to 5 A. D. Because this is a low-voltage DC circuit, anyone can install this wiring without electrical training or qualifications. E. Connect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return wire to the RT terminal. F. A ground wire can optionally be connected to the screw terminal on the front of the switch. Answer: C,E Question: 8 What are two benefits of a star network topology? (Choose two.) A. Disruption of the entire network is not required when adding new machines. B. Any problem which leaves the network inoperable can be traced to the central hub. C. This network type requires less cable as compared to linear bus topology. D. The performance of one of the numerous nodes cannot reflect on the performance of other nodes. E. The performance of the entire network is directly dependent on the performance of the hub. Answer: A,B Question: 9 Which three of the following components must be elected before the Spanning Tree Protocol can converge in a switched LAN? (Choose three.) A. designated ports B. duplex operating mode C. fast mode ports D. root bridge E. root ports F. BDPU priority

  6. Answer: A,D,E Question: 10 What is the purpose of Spanning Tree Protocol? A. to prevent routing loops B. to create a default route C. to provide multiple gateways for hosts D. to maintain a loop-free Layer 2 network topology E. to enhance the functions of SNMP Answer: D Question: 11 Refer to the exhibit. CCNA.com has the industrial network shown in the exhibit. All switches are configured as layer 2 switches and are using VLAN 1 as their management VLAN. Each VLAN 1 interface has been assigned the correct IP address. What is the purpose of assigning a default gateway to SW-C switch? A. allows connectivity between the VLAN 1 interface on SW-C and other devices in the network. B. allows connectivity between Host A and other devices in the network. C. allows connectivity between Host B and other devices in the network. D. allows the switch to pass traffic between Host A and Host B Answer: A

  7. Question: 12 Why is SSH preferred over Telnet as a method of accessing a network device to alter or view the configuration? A. Telnet encrypts only the login information, not the entire transmission. B. SSH requires fewer network resources and no additional configuration. C. Telnet is more difficult to use and configure than SSH. D. SSH encrypts the login and session information. Answer: D Question: 13 Given a ring topology, which loop prevention mechanism provides the fastest reconvergence time after a link failure? A. Rapid Per-VLAN Spanning Tree Protocol B. Resilient Ethernet Protocol C. Multiple Spanning Tree Protocol D. Spanning Tree Protocol Answer: B Question: 14 Which two ports does EtherNet/IP use to communicate? (Choose two.) A. TCP 44818 B. UDP 44818 C. TCP 502 D. UDP 502 E. TCP 2222 F. UDP 2222 Answer: A,F

  8. THANKS FOR TRYING THE DEMO OF OUR PRODUCT Visit Our Site to Purchase the Full Set of Actual 600-601 Exam Questions With Answers. 0TUhttp://www.test4direct.com/600-601.html We Also Provide Practice Exam Software That Simulates Real Exam Environment And Has Many Self-Assessment Features. Download Free Product Demo From: 0TUhttp://www.test4direct.com/600-601.htmlU0T Money Back Guarantee Check Out Our Customer Testimonials 0TUhttp://vimeo.com/102521226U0T

More Related