160 likes | 279 Views
DEE4521 Semiconductor Device Physics Lecture 3a : Transport: Drift and Diffusion. Prof. Ming-Jer Chen Department of Electronics Engineering National Chiao-Tung University October 2, 2014. Textbook pages involved.
E N D
DEE4521 Semiconductor Device Physics Lecture 3a: Transport: Drift and Diffusion Prof. Ming-Jer Chen Department of Electronics Engineering National Chiao-Tung University October 2, 2014
Textbook pages involved This lecture accompanies pp. 111–131 on drift and diffusion, as well as pp. 159-175 on non-uniform doping, of textbook.
Drift Hole drift current density Jp,x,drift = qp<vx> = qppx Maxwellian velocity distribution (equilibrium) for holes (<vx> = 0) Shifted Maxwellian velocity distribution for holes (electric field x: must be small) f(vx) Holes <vx>: drift (NOT thermal) velocity p: hole mobility Similarly, for electrons Jn,x,drift = qnnx Note: Polarity + - 0 vx x
Diffusion Electron diffusion current density Jn,x,diffusion = qDndn/dx p or n very hot Dn: Electron diffusion coefficient Hot to Cold: Diffusion Gradient of carrier density very cold x Dp: Hole diffusion coefficient
Why D and its unit? f(x) This is a random walk problem. N = 0 1 -3d -2d -1d 0 1d 2d 3d x N = 1 1/2 1/2 Variance [x2] =Nd2 N = 2 1/4 1/4 1/4 1/4
I-V in a biased semiconductor • = V/L • I/A = J • Applied V must be small. For electrons in a band, Jn = Jn, drift + Jn,diffusion For holes in another band, Jp = Jp,drift + Jp,diffusion Total J = Jn + Jp = (n + p) + diffusion components = + diffusion components Electron conductivity n = qnn Hole conductivity p = qpp Total conductivity = n + p
Non-uniformly doped semiconductor is a Good Vehicle, • to derive Einstein’s relationship. • to prove that in equilibrium case, Fermi level remains constant, through any direction in all spaces (real space, energy space). 4-2
Built-in Field in Non-uniform Semiconductors You must be able to distinguish between built-in electric field and applied electric field. (hint: Superposition principle) 4-9
The experimentally measured dependence of the drift velocity on the applied field. Figure 3.9 Focus on low field region (<103 V/cm) drift = 3-10
Mobility as a function of temperature. At low temperatures, impurity scattering dominates, but at high temperatures, lattice vibrations dominate. Figure 3.8 3-9
(a) An electron approaching an ionized donor is deflected toward it, but a hole is deflected away from the donor. (b) Electrons deflect away from the negatively charge ionized acceptors but holes deflect toward them. Figure 3.5 3-6 Coulomb (or Impurity) Scattering
Displacement of atomic planes under the influence of a pressure wave. For a longitudinal wave (a), the displacement is in the direction of motion. For a transverse wave (b), the displacement is transverse to the direction of motion. For a three-dimensional crystal, for each longitudinal wave there are two transverse waves. The dashed lines represent the equilibrium positions, and the solid lines indicate the deflected positions at a given time. Figure S1B.6 S1B-6 Lattice Vibrations
Room temperature majority and minority carrier mobility as functions of doping in p-type and n-type silicon. Solid lines: minority carriers; dashed lines: majority carriers. Figure 3.4 3-5
Electron Mobility n = qfe/m*ce Electron Conductivity Effective Mass Electron Mean Free Time or Electron Average Scattering Time Time constants are relevant in device physics. So, the ability to experimentally extract those is essential.
How to derive n = qfe/m*ce? This is a collision (scattering) event. This event is a Poisson event. Given applied in a conductor with a length L : time to scatter, free time l: free path, scattering length Two random variables: and l n: total number of collision events l l l l l v v = (a + a +…….+ a)/n vdrift = <v> = na<v>/n =a<v> … L = a<2>n/2 follows exponential distribution n = L/vdrift<> a t Slope = a = q/m