1 / 16

The PL-259 Connector

The PL-259 Connector. Amphenol Nickel Plated Body Silver Plated Pin. No Name - Made in USA Silver Plated Body Silver Plated Pin. UG-175 Reducer Silver Plated. Teflon Insulator. Phenolic Insulator. File around the holes in a nickel plated connector to make it easier to solder.

saxon
Download Presentation

The PL-259 Connector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The PL-259 Connector Amphenol Nickel Plated Body Silver Plated Pin No Name - Made in USA Silver Plated Body Silver Plated Pin UG-175 Reducer Silver Plated

  2. Teflon Insulator Phenolic Insulator

  3. File around the holes in a nickel plated connector to make it easier to solder.

  4. Before doing anything slip the shell and reducer onto the coaxial cable!

  5. Remove the jacket from the cable. Be careful not to nick the shield!

  6. Slide the reducer up the cable so the end is even with the jacket. Fold the shield back over the reducer.

  7. Trim the shield to just above the threads on the reducer.

  8. Remove the insulation from the center conductor. Be careful not the nick the center conductor!

  9. Push the reducer into the body of the connector and screw in. The shield will be visible through the holes in the body.

  10. Solder the body to the shield & reducer through all four holes in the body.

  11. Trim the center conductor even with the end of the pin in the connector. Solder the center conductor to the pin.

  12. Slip the shell over the body and screw on.

  13. Finished!

More Related