200 likes | 308 Views
2 nd session of R&A. Transistors & couplers. Agenda. Transistors as switch. Transistor testing. Opt couplers. Relays. Simulation with Proteus 7 professional program. Transistor working theory. Consist of two diodes back to back.
E N D
2nd session of R&A Transistors & couplers
Agenda • Transistors as switch. • Transistor testing. • Opt couplers. • Relays. • Simulation with Proteus 7 professional program.
Transistor working theory • Consist of two diodes back to back. • By controlling states of the two diodes , we can control the switching of the transistor (ON-Off). • Look at this program to get the idea !!!!
Opt Couplers • Opt couplers make an isolation between interfaces of two circuits. • typically consist of a gallium arsenide LED (light-emitting diode) and an optical receiver such As phototransistor or light-triggered diac . The two are separated by a transparent barrier which blocks any electrical current flow between the two, but does allow The passage of light.
Relays • An electromechanical or solid-state device operated by variations in the input which, in turn, operate or control other devices connected to the output. They are used in a wide variety of applications throughout industry, such as in telephone exchanges, digital computers, motor and sequencing controls, and automation systems. • Bins configuration (No,Nc,C,Coil).
Question ???!!!!! • When you will use Relay instead of Opt coupler in your application and vise versa??!!!
Simulation Proteus 7 Program
Introduced by • Eng. Mustafa Ahmed Hemdan. • Chairman of Robotics &Automation Chapter • Communications & Electronics department. • E-mail: hemdan@ieee.org • Mob: +20173220460 • Our blog : • http://rastsc.wordpress.com • Our group on facebook : • Robotics & Automation Chapter