'Dc distribution' presentation slideshows

LVDC standards development

NEMA/NFPA/UL LVDC Conference April 8, 2011 Product Standards Ken Boyce Underwriters Laboratories Inc. LVDC standards development. DC equipment has been used in many focused applications in the past, dating back to Thomas Edison as a vocal proponent

464 views • 30 slides

Technical Panel Session. Sunday January 11, 2015. DC System Failure Modes- Utilities

208 views • 20 slides

Power protection solutions for Oil and Gas

Power protection solutions for Oil and Gas. Solution with Local Content. ...secure power is essential for:. Safety Devices. Process Devices. Power Devices. We design power protection solutions from the complete oil and gas value chain ; Upstream Midstream Downstream. AC UPS

191 views • 18 slides

Theme 2: Project 4: Integration Design Guidelines and Performance Metrics - Study Cases

Theme 2: Project 4: Integration Design Guidelines and Performance Metrics - Study Cases . Project Leader: Ani Gole University of Manitoba . Outline of Work. Research Commenced May 1, 2010 Research Personnel (to date): Dr. Tomas Yebra Vega (Post-Doctoral Fellow)

218 views • 7 slides

Model Predictive Control of PV Sources in A Smart DC Distribution System Maximum Power Point Tracking and Droop Control

In a dc distribution system, where multiple power sources supply a common bus, current sharing is an important issue. When renewable energy resources are considered, such as photovoltaic (PV), dc/dc converters are needed to decouple the source voltage, which can vary due to operating conditions and maximum power point tracking (MPPT), from the dc bus voltage. Since different sources may have different power delivery capacities that may vary with time, coordination of the interface to the bus is of paramount importance to ensure reliable system operation. Further, since these sources are most likely distributed throughout\ the system, distributed controls are needed to ensure a robust and fault tolerant control system. This paper presents a model predictive control-based MPPT and model predictive control-based droop current regulator to interface PV in smart dc distribution systems. Back-to-back dc/dc converters control both the input current from the PV module and the droop characteristic of the output current injected into the distribution bus. The predictive controller speeds up both of the control loops, since it predicts and corrects error before the switching signal is applied to the respective converter.

113 views • 7 slides

Model Predictive Control of PV Sources in A Smart DC Distribution System Maximum Power Point Tracking and Droop Control

In a dc distribution system, where multiple power sources supply a common bus, current sharing is an important issue. When renewable energy resources are considered, such as photovoltaic (PV), dc/dc converters are needed to decouple the source voltage, which can vary due to operating conditions and maximum power point tracking (MPPT), from the dc bus voltage. Since different sources may have different power delivery capacities that may vary with time, coordination of the interface to the bus is of paramount importance to ensure reliable system operation. Further, since these sources are most likely distributed throughout\ the system, distributed controls are needed to ensure a robust and fault tolerant control system. This paper presents a model predictive control-based MPPT and model predictive control-based droop current regulator to interface PV in smart dc distribution systems. Back-to-back dc/dc converters control both the input current from the PV module and the droop characteristic of the output current injected into the distribution bus. The predictive controller speeds up both of the control loops, since it predicts and corrects error before the switching signal is applied to the respective converter.

127 views • 7 slides

Model Predictive Control of PV Sources in A Smart DC Distribution System Maximum Power Point Tracking and Droop Control

In a dc distribution system, where multiple power sources supply a common bus, current sharing is an important issue. When renewable energy resources are considered, such as photovoltaic (PV), dc/dc converters are needed to decouple the source voltage, which can vary due to operating conditions and maximum power point tracking (MPPT), from the dc bus voltage. Since different sources may have different power delivery capacities that may vary with time, coordination of the interface to the bus is of paramount importance to ensure reliable system operation. Further, since these sources are most likely distributed throughout\ the system, distributed controls are needed to ensure a robust and fault tolerant control system. This paper presents a model predictive control-based MPPT and model predictive control-based droop current regulator to interface PV in smart dc distribution systems. Back-to-back dc/dc converters control both the input current from the PV module and the droop characteristic of the output current injected into the distribution bus. The predictive controller speeds up both of the control loops, since it predicts and corrects error before the switching signal is applied to the respective converter.

118 views • 7 slides