1 / 10

-End cap

005-i. CHAPTER. -End cap. End cap. 3.000mm. 1. Cut at 45º in the end for lodging of the end cap. End cap. Glue. Glue. 2. G lue all the sides with c u t at 45º. Aluminium tape. End cap. External face. Level. 3. U nite the four sides with aluminum tape for the exterior. End cap.

senta
Download Presentation

-End cap

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 005-i CHAPTER -End cap

  2. End cap 3.000mm 1 • Cut at 45º in the end for lodging of the end cap.

  3. End cap Glue Glue 2 • Glue all the sides with cut at 45º

  4. Aluminium tape End cap External face Level 3 • Unite the four sides with aluminum tape for the exterior.

  5. End cap Interior face 4 • Rotate the duct in position with the interior face up.

  6. End cap End cap 5 • Paste the Cover in position on the base.

  7. End cap 1 6 • Close the first side in position 90º vertical.

  8. End cap 2 7 • Also close the second side in position 90º vertical.

  9. End cap Pressing 3 Pressing 8 • Close the third side and pressing the closing joint with the PVC pipe.

  10. Silicon inside Aluminium tape Aluminium tape End cap 9 • Place the aluminum tape in the closing angle and the silicon.

More Related