1 / 37

CCNA 4 v3. 1 Module 4

CCNA 4 v3. 1 Module 4. CCNA 4 v3.0 Module 4 ISDN and DDR. Objectives. ISDN concepts ISDN configuration DDR configuration. Digital Communication with ISDN. ISDN Benefits. ISDN Standards. ISDN Access Options. ISDN 3-Layer Model. Q.931 Messaging-Call Setup Example. Call Processing.

senwe
Download Presentation

CCNA 4 v3. 1 Module 4

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CCNA 4 v3.1 Module 4

  2. CCNA 4 v3.0 Module 4ISDN and DDR

  3. Objectives • ISDN concepts • ISDN configuration • DDR configuration

  4. Digital Communication with ISDN

  5. ISDN Benefits

  6. ISDN Standards

  7. ISDN Access Options

  8. ISDN 3-Layer Model

  9. Q.931 Messaging-Call Setup Example

  10. Call Processing • The D channel is used to send the called number to the local ISDN switch. • The local switch uses the SS7 signaling protocol to set up a path and pass the called number to the remote ISDN switch. • The remote ISDN switch signals the destination over the D channel. • The destination ISDN NT-1 device sends the remote ISDN switch a call-connect message. • The remote ISDN switch uses SS7 to send a call-connect message to the local switch. • The local ISDN switch connects one B channel end-to-end, leaving the other B channel available for a new conversation or data transfer. Both B channels can be used simultaneously.

  11. ISDN Functions and Reference Points

  12. ISDN Functions and Reference Points

  13. BRI Reference Points

  14. Cisco ISDN BRI Interfaces

  15. S/T ISDN Interface U ISDN Interface ISDN Interfaces

  16. ISDN Switch Types

  17. Configuring ISDN BRI

  18. Configuring ISDN BRI

  19. Configuring ISDN PRI

  20. Switch Types Available for ISDN PRI Configuration

  21. ISDN PRI Examples

  22. Verifying ISDN Configuration

  23. Troubleshooting ISDN Configuration

  24. DDR Operation

  25. DDR Operation

  26. Configuring Legacy DDR

  27. Defining Static Routes • When configuring static routes, consider the following: • By default, a static route will take precedence over a dynamic route because of its lower administrative distance. Without additional configuration, a dynamic route to a network will be ignored if a static route is present in the routing table for the same network. • To reduce the number of static route entries, define a summarized or default static route

  28. Specifying Interesting Traffic – Dialer List

  29. Configuring Dialer Information – PPP

  30. The dialer-group Command

  31. The dialer-map Command

  32. The dialer idle-timeout Command

  33. Dialer Profiles Overview • Define encapsulation and access control lists • Determine minimum or maximum calls • Turn features on or off

  34. Dialer Profile Elements

  35. Configuring Dialer Interfaces

  36. Verifying DDR • show dialer • show dialer interface [BRI] • show isdn active • show isdn status

  37. Troubleshooting DDR • debug isdn q921 • debug isdn q931 • debug dialer [events|packets] • isdn call interface • clear interface bri

More Related