1 / 4

Front part was moved to level pipe rack and make easier to lift onto cat walk

One end of a casing joint fell between two sections of pipe rack support, hit a floorman and badly injured his foot. Front section of support had been moved leaving a gap.

sevilen-osman
Download Presentation

Front part was moved to level pipe rack and make easier to lift onto cat walk

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. One end of a casing joint fell between two sections of pipe rack support, hit a floorman and badly injured his foot. Front section of support had been moved leaving a gap.

  2. Rolling of the casing joint was not done properly. Joint was not rolled square on the pipe rack and so it dropped through the gap

  3. Only part of the support was moved leaving a gap between the two pieces Front part was moved to level pipe rack and make easier to lift onto cat walk

  4. What went wrong? * Joint was not rolled square on pipe rack. * Men did not pay attention to their work. * Set-up of pipe rack not acceptable. Support was wrongly placed. * Supervisor did not monitor work enough.How do we put it right?* Plan the work, work the plan. * Pay attention to the work. * Toolbox Talk - before starting work make sure job is understood by everyone. * Improve supervision.

More Related