1 / 7

Bumpers 101

Bumpers 101. FIRST Team 67 The HOT Team. Design. Step One: Design y our robot Finalize Dimensions Watch out for holes in frame that need to remain uncovered. Cut the Wood. Using outside dimensions for your robot’s frame, cut your wood of choice.

sevita
Download Presentation

Bumpers 101

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bumpers 101 FIRST Team 67 The HOT Team

  2. Design • Step One: Design your robot • Finalize Dimensions • Watch out for holes in frame that need to remain uncovered

  3. Cut the Wood • Using outside dimensions for your robot’s frame, cut your wood of choice. • Plywood is a good option, plenty strong enough for this • Pieces should form a layer outside your robot’s frame This year we recycled the wood from previous year’s bumpers to make a rookie team’s

  4. Drill, Secure and Reinforce Bumpers • Drill holes for wood screws to form simple butt joints.

  5. Cut angle • Use metal angle pieces on the frame side to reinforce your joints, using screws running perpendicular to the angle to secure them.

  6. Finishing • Encircle bumpers in pool noodle, wrap with plastic wrap, and seal plastic wrap with a quick once over with a heat gun.

  7. Team #’s and The Cloth Wrap • Cut cloth to wrap around the bumpers.Cut numbers for your team and glue or iron them in place. Staple cloth in place.

More Related