1 / 9

混炼元件

混炼元件. 混炼螺杆. 混炼螺杆－分布混合. Static mixer mounted in the nozzle. Maddock mixing section. Maddock mixing section>static mixer mounted in the nozzle> 普通三段式. 颜色分布混合结果. 普通三段式螺杆. Maddock 螺杆. 分散混合－ PP-EPDM 镜像照片. a. b. c. d. g. e. f. h. i. j. k. 分散混合 _PP-EPDM 镜相照片. c. a. b. e. d.

shae
Download Presentation

混炼元件

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 混炼元件

  2. 混炼螺杆

  3. 混炼螺杆－分布混合 Static mixer mounted in the nozzle Maddock mixing section Maddock mixing section>static mixer mounted in the nozzle>普通三段式

  4. 颜色分布混合结果 普通三段式螺杆 Maddock 螺杆

  5. 分散混合－PP-EPDM镜像照片 a b c d g e f h i j k

  6. 分散混合_PP-EPDM镜相照片 c a b e d

  7. 塑化能力 塑化时间：long Ingen housz >dray&lawrence+ingen housz>普通三段 塑化质量： Ingen housz 最好 Ingen housz螺杆 普通三段式螺杆

  8. 温 度－不同混炼元件 不同混炼螺杆注射时不同位置下的熔体温度 1、加混炼元件，改进螺杆设计有助于 减少熔体温度的波动，提高均匀性； 2、不同混炼元件对提升温度均匀性效 果不一样，普通三段式温度变化最大

More Related