1 / 39

COLLIDE-3 AVM

COLLIDE-3 AVM. Walter Castellon CpE & EE Mohammad Amori CpE Josh Steele CpE Tri Tran CpE Sponsored by: Dr. Josh Colwell. Background. Planetesimal to Protoplanet to Planet is well understood Have gravitational forces Prior to this stage is still unclear

shana-noble
Download Presentation

COLLIDE-3 AVM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COLLIDE-3 AVM Walter Castellon CpE & EE Mohammad AmoriCpE Josh Steele CpE Tri Tran CpE Sponsored by: Dr. Josh Colwell

  2. Background • Planetesimal to Protoplanet to Planet is well understood • Have gravitational forces • Prior to this stage is still unclear • How do the particles stick together? • High velocity vs Low velocity impacts • Do they hold the key?

  3. The Experiment • COLLIDE-3 will be attached to a sub-orbital rocket • Upon entering micro-gravity LED’s and a Camera will be turned on to record the experiment • Next a spherical quartz object will be dropped onto dust/simulant • The camera will record the results of the quartz object and dust/simulant in micro-gravity

  4. The Experiment

  5. The Problem • COLLIDE-3 scheduled to fly on private, experimental suborbital rocket • This rocket had an AVM module which would control all of the functions of COLLIDE-3 • The rocket had problems, and was no longer available to us • Dr. Colwell was left with an experiment, but no way to run it • Needed a new AVM if he wished to utilize his experiment on a different rocket.

  6. AVM (Avionics Module) • Brain of experiment • Manages hardware/power • Runs COLLIDE-3 • Record results • Store results

  7. Requirements • Connected to 28VDC source and 120VAC sources • Low weight • High vibration resistance • Fully automated • Capable of recording greater than 80fps at 640x480 at times ranging from 30s-2m • User friendly • External access to flight variables • Experiment must always update with these new variables • Cost efficient

  8. Hardware Block Diagram SSD P820 DM CAMERA Microcontroller H48C MUSCLE WIRE LEDs MICROSTEP DRIVER

  9. AVM Components • EPIA P820-12 embedded board • Microcontroller • Camera • LEDs • Solid State Drive • Accelerometer • Display Module • Stepper Motor • Micro-step driver • Muscle wire • Wireless Comm

  10. Standard Components • LEDs: 2 LED arrays each array has 48 LEDs • Micro-step driver: requires 12v, 5v, PWM • Muscle wire: 1 amp of current at 5V

  11. Camera • AVM will be able to support both industrial and consumer cameras • SVSI “Stream View-LR” and GoPro “HD Hero” • GoPro is a consumer camera used during initial experiments to reduce financial loss in case of rocket failure • SVSI is an industrial camera that will be used more often in the long run

  12. SVSI vs GoPro

  13. Display Module • Can use either serial or USB interface • User friendly software • Will allow user to view current experimental variables

  14. Display Menu • Displays all experimental variables • Delay after microgravity • Delay to record • Recording duration • Updates every 1 second

  15. External Communication • Rocketfish micro-USB bluetooth adapter • Data transfer of 3 Mb/s • Range of 20 feet • No interference • Minimal weight and footprint

  16. Wireless Access (via BT) • Supported by: • Windows XP, Vista, 7 • MAC OS 10.4 and later • Default shared folder is AtMega code • Variables will be top 3 lines for ease of access • Copy file locally  make changes  copy back to shared folder

  17. Solid State Drive • Using SATA II connection write speed is 95 MB/s • Shock Resistance is 1,500 G • Vibration Resistance 2.17G – 3.13G (Operating – Non-Operating)

  18. Accelerometer • Parallax H48C • 3-axis readings • Unfortunately, support is for PBASIC language • Need conversion for ATMega • Reads in voltage outputs from each axis and converts into a G-rating using the following forumula: • G = ((axis – vRef) / 4095) x (3.3 / 0.3663) • Our code must do this conversion

  19. Accelerometer – False Positives • Pins can sometimes falsely detect G-levels • Costly mistake that needs to be protected against • Will have counter loop that continuously checks flag every .4ms • If pin consistently reads zero gravity for set amount of time, it is not a false positive, and experiment can proceed

  20. EPIA P80-12 • Hosts the experimental code and the variables that can be changed externally. • Uploads procedure code to the microcontroller • Activates recording for the camera • Handles high speed image transfers from the camera

  21. EPIA P80-12 • Cost is $310 • Windows board • Compatible to all cameras • Flexible to experimental changes • User friendly • Excellent hardware and software support • Smaller form factor

  22. Microcontroller • Stores experimental variables and procedure • Reads in microgravity mode from accelerometer • Utilizes relays to activate COLLIDE-3 components • Communicates with EPIA P820-12 to power on camera

  23. ATMega328 • 6 dedicated PWM lines • Small footprint • Meets basic requirements • I/O pins • Memory (RAM, EEPROM) • Serial/USB pins • Larger support base • C language (all members familiar) • Familiarity

  24. FT232R Breakout Board • Allows communication between the Arduino program on the P820-12 and the ATMega328 • Utilizes the ATMega’sTx and Rx lines

  25. Power Conversion • Rocket will only provide standard AC sources and a 28V DC power supply • Our components take 5,6, and 12 volts • 12V: Microstep VCC, LEDs • 6V: Microstep input, muscle wire • 5V: ATMega328 • Will utilize DC-DC converters and regulators to convert the 28V to usable levels

  26. EC7A-24S12 • 12V requirements will be handled by CINCON EC7A-24S12 • Input voltage range of 18-36VDC • Output voltage regulated at 12V with output current of 835mA

  27. PT78ST106H • 6V requirements will be handled by POWER TRENDS PT78ST106H • Takes input voltages from 9-38V • Outputs a constant 6V voltage at a current of 1 amp • Will utilize two of them, since we will use more than 1 amp of current at 6V

  28. LM7805 • Finally, 5V requirements will be handled by a standard LM7805 5V regulator • Instead of regulating the 28V input source, this will simply be taking in a 9V battery

  29. IMB03C • Since the microcontroller cannot provide enough volts/amps to power COLLIDE-3’s components, it will instead activate a relay, which will have a load of the regulated voltages from the sources previously mentioned • We will implement the AXICOM IMB03C mechanical relay • Handles up to 2A of current • Functions up to 300g of shock, survives up to 500g of shock • 100uV control voltage will switch relay, which can have a load up to 220V

  30. Circuit Board

  31. COLLIDE-3

  32. Microcontroller

  33. Accelerometer (H48C)

  34. Software Flow Chart Start

  35. Software Flow Chart

  36. Cost

  37. Project Issues(Technical) • Communication protocol between EPIA P820-12 and ATmega328 (FT232R) • Camera compatibility • Changing variables externally

  38. Project Issues(Nontechnical) • Mono • Theft • Crashes

  39. Questions?

More Related