1 / 13

Introduction

Introduction. WEL COME TO SHRIRAM FOUNDRY MACHINE SHOP. Continued…. Our Customers. OUR PRODUCTS. CLAAS PULLEYS. CONMET HUB FRONT & REAR HUB. CONMET ROTOR DISC. Front Axel Support. Our Team. Shriram Quality circle ESTABLISHED ON -11 TH Nov. 2012

shania
Download Presentation

Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction WEL COME TO SHRIRAM FOUNDRY MACHINE SHOP

  2. Continued… • Our Customers

  3. OUR PRODUCTS CLAAS PULLEYS CONMET HUB FRONT & REAR HUB CONMET ROTOR DISC Front Axel Support

  4. Our Team Shriram Quality circle ESTABLISHED ON -11TH Nov. 2012 MR .Patil Pratap P./Naikwadi Rafiq ( CO-ORDINATOR) MR.Patil P.K./Mr. Patil S.M. ( FACILATOR) Mr. Prasad Nerlekar ( LEADER) 1) Amar Patil 2) Sachin Surve 3)Patil Manoj 4 ) Ghatage Bajirao 5) Jadhav Uttam 6) Shaikh G.M. 7) Jadhav Nilesh. 8) Tupe Sampat

  5. Problem list

  6. Problem list Rating chart-

  7. Parrato Chart-

  8. Problem selected – Customer complaint hole 17.07 drill not pass throughly

  9. Cause & effect diagram for defect of Hole 17.07 drill not pass throughly Machine Man Is the specified M/C used ? Has the operator used proper drill? Is the operator not rested the job properly M/C Setting parameters Is M/C in good condition Is operator New ? Is the operator not clamped the properly ? Is job moves from the rest pad ? Hole 17.07 drill not pass throughly Is material hard ? Are Control Plan followed ? Is casting provided Having heavy cut? Has proper speed & feed mentioned on control plan ? Has proper tool changing freq. mentioned on control plan ? Is drill of proper length used ? Is casting provided as per required? Method Material Tooling

  10. Root Cause analysis for defect of Hole 17.07 drill not pass throughly Machine Man Is job moves from the rest pad ? Hole 17.07 drill not pass throughly Method Material Tooling

  11. Why-why analysis Why-why analysis for cause – is Job moves from rest pad?

  12. Identified cause & action Cause no. 1 Hole 17.07 drilling not pass thoroughly because Job moves from rest pad after cycle start due to pressure drop in clamping. Action Air catcher is provided at resting . If the job not rest properly machine will not start & also if the job moves from resting while machining cycle ,the machine will automatically stop. Relay & contactor is added which gives signal to motor if the pressure decreases in running cycle. Please see next slide .

  13. Fail safing for resting of job while Drilling Hole 17.07. Pressure gauge Air cacher is prvided at resting . If the job not rest properly machine will not start & also if the job moves from resting while machining cycle ,the machine will automatically stop. Relay & contactor is added which gives signal to motor if the pressure decreases in running cycle.

More Related