150 likes | 174 Views
Explore the existing legislation, current practices, and future strategies for in-service inspections of Pressure Equipment in Cyprus. Learn about the inspection requirements, enforcement authority, periodicity, procedures, and challenges in the inspection system.
E N D
IN-SERVICE INSPECTIONS OF PE IN CYPRUS CYPRUS PED WORKSHOP WORKING GROUP 6 Nicosia, 3-5 October 2005 by: KYPROS KYPROU, Labour Inspector Department of Labour Inspection Ministry of Labour and Social Insurance
LAYOUT Existing Legislation Current practice What is next?
IN-SERVICE INSPECTION OF PE No Provisions for in-service inspections in the Directives, (PED, SPVD). National Legislation
CYPRUS LEGISLATION In-Service Inspections of PE FACTORIES LAW, Cap. 134 Provisions for: - Steam Boilers - Steam Receivers - Air Receivers
CYPRUS LEGISLATION Factories Law, Cap. 134 MAIN PROVISIONS: Every steam boiler, steam receiver, air-receiver and their attachments shall be of good construction, sound material, adequate strength and shall be properly maintained. In service inspections requirements. Periodicity of inspections. Inspectors, (Authorised Boiler Inspectors and Approved Persons)
CYPRUS LEGISLATION Factories Law, Cap. 134 ENFORCEMENT INSPECTION AUTHORITY: Department of Labour Inspection of the Ministry of Labour &Social Insurance COMPETENT PERSONS(Authorised Boiler Inspectors and Approved Persons): Labour Inspectors of the Department of Labour Inspection
CYPRUS LEGISLATION Factories Law, Cap. 134 PERIODICITY OF INSPECTIONS
IN-SERVICE INSPECTIONS Existing Procedures A. S T E A M B O I L E R Cold Inspection:Interior and exterior is thoroughly examined… Under Normal Steam Pressure Inspection: Includes functional tests of safety systems and safety devices. Hydraulic Pressure Test: After extensive repair and according to risk analysis.
IN-SERVICE INSPECTIONS Existing Procedures B. S T E A M R E C E I V E R Includes functional test of safety valves and external visual examination. C. A I R R E C E I V E R Includes functional test of safety valves, wall thickness measurements and external visual examination.
IN-SERVICE INSPECTIONS Existing Procedures REPORTING: After each inspection, a report in a prescribed form is issued showing the inspection results. PRESCRIBED FEES
THE EXISTING SYSTEMAdvantages – Disadvantages ADVANTAGES: - Good quality of inspections - Independent Inspectors - Low inspection cost for the owners - Inspections database
THE EXISTING SYSTEMAdvantages – Disadvantages DISADVANTAGES: - Limited scope - Absence of written scheme of inspections - Prescriptive Law - Inadequate number of Inspectors
SOME STATISTICS 7 Labour Inspectors responsible for in-service inspections of the following machinery: More than 7500Lifts 1400 Cranes and Lifting devices 730 Steam Boilers 270 Steam Receivers 3100 Air Receivers Approx. * INSPECTIONS OF STEAM BOILERS IS A PRIORITY
SOME STATISTICS Total no. inspections of inspectable equipment
WHAT IS NEXT: - Amendment of the existing legislation or new regulations - Focus on the owner/user responsibilities - New Inspection Bodies - Support any efforts and proposals for a harmonized in-service inspection system throughout EU.