200 likes | 520 Views
Reflecting Telescopes. Astrophysics Lesson 3. Homework. Collect last homework – feedback on Friday. Past Paper Question for this Friday. Learning Objectives. Draw ray diagram to show path of rays through the telescope as far as the eyepiece for a Cassegrain arrangement.
E N D
Reflecting Telescopes Astrophysics Lesson 3
Homework • Collect last homework – feedback on Friday. • Past Paper Question for this Friday.
Learning Objectives • Draw ray diagram to show path of rays through the telescope as far as the eyepiece for a Cassegrain arrangement. • Describe the relative merits of reflectors and refractors. • Explain qualitatively what is meant the terms chromatic aberration and spherical aberration.
Question • In a telescope the eyepiece has a focal length of 2 cm and the objective has a focal length of 220 cm. • What is the magnification? • If the moon subtends an angle of 8.8 × 10-3 rad to the naked eye, what would the angle be for the image of the moon observed through the telescope? • Assuming the Moon is at a distance of 384,400 km, calculate the radius of the Moon.
Answer • Magnification = fo/fe = 220/2 = 110 • Angle subtended by the Moon = 8.8 × 10-3 rad x 110 = 0.97 rad • D = rα = 384,400 km × 8.8 × 10-3 radians = 3382.72 km So the radius of the Moon = D/2 = 1690 km (3 s.f.)
Summary • Refracting telescopes use converging lenses • Lenses make images of objects that can be worked out using Ray diagrams • Or the lens formula (1/f = 1/u + 1/v) • The telescope consists of two lenses set at a distance = fo + fe (normal adjustment) • Magnification = β/α = fo/fe
Disadvantages of Refractors • They suffer from chromatic aberration. • Bubbles and impurities in the glass absorb some of the light, large lenses are very difficult and expensive to make. • Large lenses are very heavy and can only be supported from their edges so their shape can become distorted. • To get a good magnification you need an objective lens with a very long focal length. This can make the telescope very long.
Chromatic Aberration • Glass refracts different colours of light by different amounts (blue more than red). • The principal focus for each colour will be in a slightly different position and blurs the overall image.
Cassegrain System Concave primary mirror, convex secondary mirror.
Cassegrain Arrangement • In the Cassegrain system, the eyepiece is at the back of the telescope. The hole in the centre of the mirror does not affect the viewing ability.
Advantages of Reflectors • No chromatic aberration – mirrors do not refract light. • No spherical aberration – a parabolic mirror can be used to give perfect focusing. • No distortion – the mirror can be supported more strongly. • Better resolving power/greater brightness – mirrors can be larger. • More light gets through (brighter image) - a lens absorbs more light.
Spherical Aberration • The shape of the mirror must be parabolic to ensure that parallel rays converge at the same point. • If it isn’t quite parabolic the rays don’t converge and the image is blurred – spherical aberration.
Questions • Suggest reasons for the following: • (a) The silvering on a telescope mirror is on the top surface. • (b) The hole in the centre of the mirror of the Cassegrain system does not affect the viewing ability of the instrument.
Answer • (a) The light does not have to pass through glass, so will not suffer any chromatic aberration. All colours are reflected by the same amount. • (b) The region lost by the presence of the secondary mirror is insignificant. It would not matter if the dead space caused by the secondary mirror were removed.
Reflectors (further notes) • All large telescopes use the reflecting system. • The largest telescope in the world has a 5 metre diameter concave mirror which requires many tonnes of glass, a considerable cooling time, and many hundred of hours of grinding to get it to a perfect shape. • It was silvered with a few grams of aluminium.