210 likes | 384 Views
Using PVSS for the control of the LHCb TELL1 detector emulator (OPG). P. Petrova, M. Laverne, M. Muecke, G. Haefeli, J. Christiansen CERN European Organization for Nuclear Resarch. Outline. Data Acquisition for LHCb System overview TELL1 OPG SCADA&PVSS
E N D
Using PVSS for the control of the LHCb TELL1 detector emulator (OPG) P. Petrova, M. Laverne, M. Muecke, G. Haefeli, J. Christiansen CERNEuropean Organization for Nuclear Resarch
Outline • Data Acquisition for LHCb • System overview • TELL1 • OPG • SCADA&PVSS • Use of SCADA tools in control applications • What is PVSS? • GUI-control for OPG • Configuration panel set • DIM • Why GUI? • PVSS challenges • Design problems • Summary and conclusions TELL1 - OPG Control
DAQ system overview Data Acquisition for LHCb TELL1 - OPG Control
TELL1 board overview TELL1 is an FPGA based readout board, part of the off-detector acquisition electronics used in the LHCb experiment TELL1 board TELL1 - OPG Control
TELL1 - functions • TELL1 is a receiver card for the analogue or optical data from the detector front-end electronics • It provides basic signal processing and filtering of the subdetector signals • TELL1 is designed to accept input “mezzanine” cards for both copper and optical link configurations, requested by the different subsystems. • It performs Level 1 (L1) buffering and interfacing to the Level 1/High Level Trigger (L1/HLT) • Connects to the HLT via Gigabit Ethernet network • TELL1 is controlled by ECS (Experiment Control System) via a “Credit–Card PC” (CCPC) • Via a “GlueCard” PCI bridge the CCPC connects to 3 different buses • On-board are used 3 types of buses: Parallel Local Bus, JTAG and I2C • The TELL1 board is planned to perform intensive processing of the input dataflow from the seven different LHCb detectors TELL1 - OPG Control
OPG • OPG – Optical Pattern Generator • It emulates the subdetector output signals of the six subdetectors using optical links with their specific format • OPG boards exist for use with optical links only • Emulated signal parameters • pattern files • configuration database - shorter configuration time, unification of the test patterns and possible reuse of the same parameterization • OPG has the same control as TELL1 via CCPC and GlueCards TELL1 - OPG Control
SCADA for control • SCADA (Supervisory Control and Data Acquisition) systems • used in industrial and engineering applications for monitoring and control of distributed systems from a master location • focus on supervising • purely software package that is positioned on top of hardware to which it interfaces. • used in industry and experimental physics laboratories • rely on various functionality, scalability, performance and openness • alternative to “in-house” developed packages, even for very demanding and complex control systems as those of physics experiments TELL1 - OPG Control
What is PVSS? • PVSS II is one of the existing industrial SCADA applications, produced by the Austrian company ETM. • PVSS can connect to hardware (or software) devices, acquire the data they produce and use it for their supervision • It can monitor devices’ behaviour and initialize, configure and operate them • PVSS can run in a distributed manner • as one single system • as various interconnected systems • It has multi-platform support (Linux and Windows). TELL1 - OPG Control
PVSS features • It has mechanisms for: • alarm handling • access control • archiving • trending • Provides various interfaces and drivers (OPC, ProfiBus, CanBus, Modbus TCP/IP and Applicom) to external hardware and software • Some additional interfaces (like DIM extended for CCPC/SPECS) - developed at CERN • JCOP Framework for PVSS • PVSS provides development environment with Human Machine Interface (HMI) and scripting/API (Application Programming Interface) capabilities TELL1 - OPG Control
Device/signals correspondence PVSS DataPoints • A key SCADA/PVSS concept is the data point (DP) • In PVSS every object is modeled using data point types • Data point type is collection of data point elements. It’s analogous to an object oriented class with attributes, that provides inheritance. • What is the DataPoint? - Data points are particular instances of a data point type TELL1 - OPG Control
Example of a DP Structure as device representation Example DataPoint TELL1 - OPG Control
GUI Control • GUI (Graphical User Interfface) • The best way of presenting control information to the user • It gives the easiest and fastest way of communication with the hardware • The graphical environment masks all hardware processes and the user interacts with the system via simple commands • Important feature of the GUI implementation - it “hides” the real system that stands behind it • No detailed knowledge of the hardware on the user side required for the communication • Via GUI-based control all devices in the network can be displayed at the same time, as well as their features TELL1 - OPG Control
Fragment definition panel OPG Control panels • OPG control constists of a set of five panels created in the PVSS environment • They are used forconfiguration and controlof the board • They show dynamically updated graphics, representing the feedback of the entered dataflow configuration • Two of the panels are for OPG parameterization and visualization of the entered values (Fragment Definition, Package Visualization) TELL1 - OPG Control
Header visualization OPG Control panels • The graphics display is constantly updated when a change in the monitored parameters is detected • This change might be due to user new entries or to hardware feedback • Most of the monitored parameters are part of the board configuration TELL1 - OPG Control
Configuration visualization OPG Control panels • Additional panel exists, in which is displayed the signal pattern file, currently used by the OPG board • The signal pattern file could be modified through it • The changes in this panel update the other visual information displays TELL1 - OPG Control
OPG Control panel OPG Control panels • The “OPG Control” panel uses DIM server (DIM DNS node) connection for getting the available in the network OPG and TELL1 board names • The user can identify the type of any of the boards, if it’s OPG or TELL1 • The mechanism of the routine is based on a JTAG chain scan of the selected board • The panel provides additional functionalities to be executed for the selected devices: • downloading/uploading of the FPGAs configuration information • monitoring of several dataflow parameters TELL1 - OPG Control
DIM • DIM is a communication mechanism running on several platforms • PVSS-DIM toolkit is an add-on software, which allows the interface of PVSS to devices which do not provide any of the PVSS supported protocols • The basic concept in the DIM approach is the concept of "service“ • Usually all CCPCs (mounted on TELL1 or OPG), register as services to one of the provided DIM servers. • Thus the information about their status and functionalities becomes available to the possible clients, interested in them TELL1 - OPG Control
Why GUI? • Advantages: • simplifies the user-to-hardware communication • allows simultaneous monitoring of several devices or interconnected systems • makes possible distant system maintenance • possible comparison and cross-references • possibility for representing even complex architectures in an intuitive and “obvious” way • speeds up and makes easier the process of setting up the necessary input values • gives simultaneous feedback with the system response to new settings • reduces the time for getting used to the new hardware • increases usability TELL1 - OPG Control
PVSS challenges and design problems PVSS has some restrictions that make the realization of the GUI difficult and not very nice looking • ActiveX functions • Microsoft technology vs. Linux • Unwanted slow-down due to real time graphics rendering • Control scripts • PVSS custom programming language CTRL • Script functions’ imperfections • Limited function set • Limited variable types and use • DP oriented programming algorithms Some additional constraints arise from the DAQ electronics requirements and CERN software compatibility policy TELL1 - OPG Control
Conclusions • The presented GUI for OPG boards control has shown to be a good approach for implementing the needed supervisory tools • Although in the process of realization in the PVSS environment the initial idea went through several major transformations, due to many toolkit constraints – mainly on the visual part, the result is satisfying and meets the predefined goals. • Most of the graphics have been elaborated with custom made scripts. Although this is slowing down the development process, it makes the GUI executable under both Windows and Linux environment. This is essential requirement for all CERN control systems. TELL1 - OPG Control