1 / 18

NETS KVM Setup

NETS KVM Setup. July 11, 2006. What we’ll cover. Setup and configuration User Interfaces Troubleshooting Open Issues Coming attractions. Setup & Configuration:. NCAR’s KVM equipment KVM configuration Server Side configuration Client Side configuration (KVM over IP only).

sheryl
Download Presentation

NETS KVM Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NETS KVM Setup July 11, 2006

  2. What we’ll cover • Setup and configuration • User Interfaces • Troubleshooting • Open Issues • Coming attractions

  3. Setup & Configuration: • NCAR’s KVM equipment • KVM configuration • Server Side configuration • Client Side configuration (KVM over IP only)

  4. Setup & Configuration: NCAR’s KVM equipment NCAR purchased a Cyclades 3202, a 1602 Alterpath KVMNetplus, and an RP.

  5. Setup & Configuration: NCAR’s KVM equipment (cont.) IP Remote User

  6. Setup & Configuration: KVM configuration • Authentication – RADIUS, UCAS, then local • Encryption – keyboard, video, mouse from kvm to client • Authorization – access to ports/servers • TCP Ports - Default ports used for IP based KVM is 5900, 5901, 5902, 5903. These are configurable. If using RDP, the default port is 3389. • Security – Custom profile: SSH v2, HTTP, HTTPS, HTTP redirection to HTTPS. It also disables direct connection to KVM ports at login. • Inband vs. Out of Band - RDP

  7. Setup & Configuration: Server Side configuration • KVM terminator – max distance 500 ft. between KVM and KVM terminator. • Mouse - Mouse acceleration should be turned off and the motion speed should be set to medium.

  8. Setup & Configuration: Server Side configuration (cont.) Video - Supported Screen Resolutions and Refresh Rates • Resolution Refresh Rates (Hz) • 640 x 480 60, 72, 75, 85, 90, 100, 120 • 720 x 400 (standard text mode) 75 • 800 x 600 60, 70, 72, 75, 85, 90, 100, 120 • 1024 x 768 60, 70, 72, 75, 85, 90, 100, 120 • 1152 x 864 60, 70, 75, 85 • 1150 x 900 66 • 1280 x 1024 60 • 1600 x 1200 (local KVM connection) 60, 75

  9. Setup & Configuration: Client Side configuration • Supported Browsers: • Internet Explorer 5, 6 • Netscape 7; • Mozilla • Enable ActiveX control and Downloads • TCP ports 5900 and 5901 are used to display the video feed over IP so make sure your firewall is not blocking these ports

  10. User Interface • Local via the On Screen Display (OSD) • Remotely via IP

  11. User Interface: OSD • 1) Open the rack mounted KMM (keyboard, mouse, monitor). Hit a key or wiggle the mouse to activate the screen. Use your UCAS password to login. • 2) You will be presented with a connection window (see below). Only ports to which you have been granted access will appear. Use the UP/Down arrows to select a port and hit enter. The video feed from the selected port should appear though sometimes you might need to press a key for it to appear. • 3) To exit, hit Ctrl+k then q which will take you back to the Connection Menu. Scroll to the bottom of the list of ports and select exit, then hit "enter".

  12. User Interface: OSD (cont.) Hot Keys • Ctrl+k q Brings up the port connection list so you can switch ports. If you press "Esc", you will get disconnected. You can press "Enter" after selecting a different port, "Cycle", or "Exit". • Ctrl+k s Reset keyboard and mouse. Allows you to reset the keyboard and mouse if either of them stops responding. • Ctrl+k . Next Port. Goes to the next authorized port. • Ctrl+k , Previous Port. Returns to the previous authorized port. • Ctrl+k v Video. Brings up a window for manual screen brightness and cable length adjustment. Cable length adjustment compensates for the length of the cable running from the KVM/netPlus to the KVM Terminator that is connected to the server. • PrintScreen Brings up a menu allowing you to perform the escape sequences [^K-n] operations using an OSD menu overlay instead. • Ctrl+k p Power management. Brings a power management menu with the options to turn on, off, or cycle the power for outlets to which the current server is connected.

  13. User Interface: Remote

  14. User Interface: Remote (cont.)

  15. User Interface: Remote (cont.)

  16. Troubleshooting • 1) The lights are on, but nobody is home. On occasion, the KVM server does not come up properly after a hard power cycle. All the lights on the KVM will be on, but locally connected screens will be unresponsive and blank and the IP Viewer will not work. Solution: Login to the KVM via the terminal server (see the UP for user/pass). If it is sitting at the '=>' prompt. Type 'boot'. The KVM will boot up. Watch the screen and you should see the process starting up. When '<name of KVM> login:' appears, the KVM should be operational. If you're already at the '<name of KVM> login:' prompt, type "reboot" to reboot the server. Watch the screen and you should see the process starting up. When '<name of KVM> login:' appears, the KVM should be operational. • 2) Mouse/Keyboard unresponsive. Occasionally the keyboard or mouse will not respond. This usually occurs if the mouse/keyboard are disconnected and then reconnected to the server. Solution: If locally connected, use the Default Hot Key sequence to reset the keyboard and mouse. If using the IP Viewer, click on "Reset Mouse and Keyboard" on the access control screen. • 3) Local mouse and remote mouse frequently lose synchronization (IP Viewer). This problem only affects the IP Viewer. Solution: Check the mouse settings of the server. Mouse acceleration should be turned off and the motion speed should be set to medium. See page 107 of the users guide for more info. If those settings check out, move the mouse around rapidly in a circle until the local and remote mouse resync (its kludgey but Cyclades doesn't have a better answer at the time if this writing).

  17. Open Issues • Mouse synchronization when using KVM over IP. • CTRL and Shift key functionality

  18. Coming Attractions • Exchange Cyclades KVM for Avocent KVM. • Pros • Virtual media • Support from vendor • Centralized management software • Java based client that works on non-windows boxes • Cons • Lose RP • Time to learn, install, and configure a new KVM • Central server to maintain

More Related