Jeep ECM Repair - Sia Electronics Inc

1. 5 Main Reasons for repair of Engine Control Modules The Engine Control Module is also known as the bran of the Engine Management System. This is responsible for controlling the mixture of fuel, variable cam timing, ignition timing as well as emission control. Dodge ECM interacts with transmission controller, Body Control Module, Stability Control System, as well as Anti Theft system apart from others. In short, the ECM is known to perform a wide range of functions that are essential for vehicle operations. Symptoms of Jeep ECMrepairs Here are some visible symptoms that indicate that you need Jeep ECM repairs: Engine Performance Issues, Running Poorly When the reading of the sensors of engines is not interpreted correctly then it will be rough to run vehicles due to cutoff of fuel, ignition issues and accessories power failures. The fuel mixture needs to be correct. If you are not getting enough fuel then it will sputter, choke, cough, and even stall. In other case (when there is too much fuel), the fuel economy decreases, exhausting the emissions. Engine Stalling, Misfiring, Will Not Run In some cases, it happens that ECM causes problem and the vehicle might ?ot ru? at all. The ECM’s ?ai? job is to position the crankshaft while controlling the timing and ignition spark. In case, there is any problem with how the ECM is performing then the vehicle may not run at all and the ECM is most probably damaged. Check Engine Light (CEL) or Other Dashboard Error Lights In case your Jeep ECM is not working properly then you can expect seeing some imaginable error lights, appearing and disappearing at some point of time. The ECM interprets and controls the sensor reading and in case, it is not doing so then you can check the CEL. Emissions Since ECM is responsible to control the fuel emission of your vehicle, in case there are some issues with it a?d it’s ?ot worki?g properly the? ?ost probably, your jeep will fail the emission tests, will emit too much smoke and colored exhaust.