820 likes | 976 Views
ePermitting Roofing System. Boris Sursky LEED AP BD + C 786-315-2050 sky@miamidade.gov. The e-Roofing Permitting System is the WINNER of the prestigious NATIONAL ROOFING CONTRACTORS ASSOCIATION 2003 GOLD CIRCLE AWARD for service to industry.
E N D
ePermitting Roofing System Boris Sursky LEED AP BD + C 786-315-2050 sky@miamidade.gov
Thee-Roofing Permitting System is theWINNERof the prestigious NATIONAL ROOFING CONTRACTORS ASSOCIATION 2003GOLD CIRCLE AWARD for service to industry.
Thee-Roofing Permitting System is theWINNER of the 2004 NATIONAL ASSOCIATIONS OF COUNTIES AWARD FOR INTEGRATING PROCESSES AND SERVICE: ROOFING/STORM PANEL PERMITTING AND SERVICES SYSTEM
Thee-Roofing Permitting System provides progressive and improved customer service through the use of advanced technology.
The e-Roofing Permitting System is an revolutionary permitting application process, with tens of thousands of Roofing permits issued since 2004.
Thee-Roofing Permitting System was put to the test after Hurricane Wilma which occurred in 2005, when over 12,000 e-Roofingpermits were issued in a 12 month period using this system.
Contact Contractor’s Section for assistancewith Tradesman Number.
Use total ft² “NOT 2 Roofing Squares” CLICK HERE
ROOF MEAN HEIGHTS CAN NOT EXCEDE 33 FT.
Note: Prescriptive fastener spacing
Note: Online Review was not approved. This happens after 2 code related rejections An example of a code related rejection, would be an incorrect roof slope or roof mean height.
All Dispositions required to be approved prior to paying for permit
Note: Provide a completed Owner’s Notification Form at the jobsite to be collected by the inspector and submitted to Micro-Film as part of the permit record.
Print completed roofing application forms for jobsite inspections
ePermitting NO NO’s • Use total ft² on permit application, do not use roofing squares (1=100 s.f.) • No Florida Product Approvals allowed, only use current Miami-Dade County Product Approvals with the ePermitting System
ePermitting NO NO’s • Do not use fractions when inputting data, use only decimal numbers • Use correct slope for specific roof system types, for example a minimum 4/12 slope is required for mechanically attached tiles
ePermitting NO NO’s • NO CHANGES CAN BE MADE TO the “ePermitting System generated Uniform Permit forms. • Changes to system generated forms require a permit revision.