1 / 27

The anisotropic Lilliput Recent Advances on Nematic Order Reconstruction: Nematic Order Dynamics

The anisotropic Lilliput Recent Advances on Nematic Order Reconstruction: Nematic Order Dynamics. Riccardo Barberi , G iuseppe Lombardo, Ridha Hamdi, Fabio Cosenza, F ederica Ciuchi, Antonino Amoddeo Physics Department, University of Calabria CNR-IPCF- LiCryL – Liquid Crystal Laboratory

silas
Download Presentation

The anisotropic Lilliput Recent Advances on Nematic Order Reconstruction: Nematic Order Dynamics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The anisotropic LilliputRecent Advances on Nematic Order Reconstruction: Nematic Order Dynamics Riccardo Barberi, Giuseppe Lombardo, Ridha Hamdi, Fabio Cosenza, Federica Ciuchi, Antonino Amoddeo Physics Department, University of Calabria CNR-IPCF- LiCryL – Liquid Crystal Laboratory Rende, Italy

  2. Nematic Liquid Crystals (NLC) • The Nematic phase is the simplest LC: • elongated molecules • no positional order • only orientational order • high sensitivity to external fields • optical and dielectric anisotropy • flexoelectric materials (abused …) • uniaxial symmetry • NLC have been used for first displays since 1960 and are currently used for commercial LCDs • Something new for fundamental ideas and/or applications? Biaxial Coherence Length, Bistable e-book readers (ZBD, HP, Nemoptic + Seyko, …) …

  3. Textural NLC transitions Fixed Topology • Freedericksz transition: slow, non polar IE2, continuous distortion of the same texture (S is constant, n rotates) monostable because only one equilibrium state at E=0 Variable Topology • Anchoring breaking • Defects creation/annihilation • Nematic order reconstruction by mechanical constraint • Nematic order reconstruction under electric fieldspatial variation of S without rotation of n at least 2 equilibrium states with different topology at E=0 topological barrier (defects, 2D-wall)biaxial intermediate order inside a calamitic materialbiaxial coherence length xB to be taken into account

  4. Static Order Reconstruction: Defect core structure of NLCN. Schopohl and T. J. Sluckin, PRL 59 (1987) 2582 Biaxiality of a nematic defect

  5. Dynamics of a nematic defect under electric field G. Lombardo, H. Ayeb, R. Barberi, Phys. Rev. E 77, 051708 (2008) 3D extension by Kralj, Rosso, Virga, Phys. Rev.E 81, 021702 (2010) Presented this morning at this conference

  6. G. Carbone, G. Lombardo, R. Barberi, I. Musevic, U. Tkalec, Phys. Rev. Lett. 103, 167801 (2009) Mechanically Induced Biaxial Transition in a Nanoconfined Nematic Liquid Crystalwith a Topological Defect

  7. Topographic pattern induced homeotropic alignment of l.c. Y.Yi, G.Lombardo, N.Ashby, R Barberi, J.E. Maclennan, N.A. Clark, Phys. Rev. E 79, 041701 (2009) Down to 200 nm

  8. Dynamical Order Reconstruction: the p-cell Planar texture Twisted texture • L.Komitov, G.Hauck and H.D.Koswig, Phys. Stat. Sol A, 97 (1986) 645 - First experimental observation • I Dozov, M Nobili and G Durand, Appl. Phys. Lett. 70, 1179 (1997) -Anchoring Breaking • Ph.Martinot-Lagarde, H.Dreyfus-Lambez, I. Dozov, PRE 67 (2003)051710 -Bulk biaxial configuration (static model) • R.Barberi, F.Ciuchi, G.Durand, M.Iovane, D.Sikharulidze, A.M.Sonnet, -Bulk order reconstruction (dynamical G.Virga, EPJ E 13 (2004) 61 model) • R.Barberi, F.Ciuchi, G.Lombardo, R.Bartolino, G.Durand, PRL., 93, (2004) 137801 • S.Joly, I.Dozov, Ph. Martinot-Lagarde, PRL, 96, (2006) 019801 • R.Barberi, F.Ciuchi, H.Ayeb, G.Lombardo, R.Bartolino, G.Durand, PRL., 96, (2006) 019802

  9. p-cell:distortions in presence of field The starting splay configuration gives suitable conditions to concentrate all the distortion in the middle of the p-cellunder electric field E E This process depends on the biaxial coherence length xB* of the nematic material *F. Bisi, E. G. Virga, and G. E. Durand, Phys. Rev. E 70, 042701 (2004)

  10. The biaxial transition: textures E<Eth E S SW E=0 E>Eth New Topology E B T E=0

  11. Textures slow dynamics S → splay SW → splay + biaxial wall B → bend T → twist E=3.5V E=0 V E=3.5V S SW S S SW E=0 V E=3.5V E=0 V B T T S S S SW

  12. Textures slow dynamics S → splay SW → splay + biaxial wall B → bend T → twist SW S B T Textures in a π-cell Director in a π-cell

  13. Fast Dynamics of Biaxial Order Reconstruction in a Nematic R.Barberi, F.Ciuchi, G.Durand, M.Iovane, D.Sikharulidze, A.Sonnet, E. Virga, EPJ E 13,61 (2004) Space (units of x) Time/ms Eigenvalues of Q in the centre of the cell during the transition. The largest eigenvalue 1 at t =0 corresponds to the eigenvector of Q parallel to the initial horizontal director: it decreases as time elapses, while the eigenvalue 2 corresponding to the eigenvector of Q in the direction of the field increase.

  14. Numerical model: symmetric case G. Lombardo, H. Ayeb, R. Barberi, PRE 77, 051708 (2008)

  15. Fluorescence confocal polarising microscopy of a p-cell Fluorescence image showing the evolution of the LC director field with time. P. S. Salter et al PRL 103, 257803 (2009)

  16. Time resolved experimentsR.Barberi, F.Ciuchi, G.Lombardo, R.Bartolino, G.Durand, PRL, 93 (2004) 137801S.Joly, I.Dozov, and P.Martinot-Lagarde, Comment, Phys. Rev. Lett. 96 (2006) 019801 R.Barberi, et al., Reply, Phys. Rev. Lett. 96 (2006) 019802 tth ≤ 80 msec

  17. How fast is Order Reconstruction? Electric current flowing in a p-cell at 40 KHz (s) Numerical Model Experiment The order reconstruction takes place on a timescale of about 10 msec. tth ≤ 10 msec

  18. Asymmetric p-cells In asymmetric cells the biaxial wall is created close to a boundary surface Close to a surface the topology could be changed by anchoring breaking, which requires weak anchoring G Barbero and R Barberi, J. Physique 44, 609 (1983) I Dozov, M Nobili and G Durand, Appl. Phys. Lett. 70, 1179 (1997)

  19. Numerical model: asymmetric case (strong anchoring)

  20. Experiments with asymmetric cells and strong anchoring [1] I. Dozov, M. Nobili, G. Durand, Appl. Phys. Lett. 70, 1179 (1997)

  21. Suitable dopants can control the nematic biaxial coherence length in a calamitic nematic Symmetric cell F.Ciuchi, H. Ayeb, G. Lombardo, R. Barberi, G. Durand, APL 91, 244104 (2007) Asymmetric cell Dopants are effective also on the surface. And the anchoring breaking? To be published on APL (2010)

  22. The cut depends on the texture ! Parallel configuration Anti-parallel configuration

  23. Distortions in presence of field bulk effect surface effect

  24. Bulk or Surface transitions ? 5CB and strong anchoring case Bulk transition Surface transition

  25. Conclusions • Nematic Biaxial Order Reconstruction is a really fast phenomenon (<=10 msec) • Nematic Biaxial Order Reconstruction must be taken into account also in the case of surface effects • Anchoring breaking needs a reinterpretation • A tool for a better understanding of confined and highly frustrated systems • Possibility of novel sub-micro/nano devices for photonics or electro-optics • Note that the Biaxial Order Reconstruction is often present in many kinds of known nematic bistable devices. This not only true for Nemoptic-Seyko technology, but even when only defects are created or destroyed. In the cases, for instance, of “zenithal bistable electro-optical devices” and “postaligned bistabile nematic displays” whose behavior can therefore be improved by a suitable control of the biaxial coherence length

  26. Biaxial coherence length • The biaxial order in a calamitic nematic is mainly governed by the biaxial coherence length where L is an elastic constant, b is the thermotropic coefficient of the Landau expansion and S is the scalar order parameter • b, and hence xB, is a parameter of the third order term in the Landau-De Gennes Q-model F. Bisi, E. G. Virga, and G. E. Durand, Phys. Rev. E 70, 042701 (2004) • by varying xB, one can favour or inhibit the transient biaxial order of a calamitic nematic F.Ciuchi, H. Ayeb, G. Lombardo, R. Barberi, G. Durand, APL 91, 244104 (2007)

  27. Electro-optical experimental set-up

More Related