1 / 37

Chem. 250 – 12/02 Lecture

Chem. 250 – 12/02 Lecture. Announcements - I. Solutions to Furlough Questions and Homework will be posted soon New Homework Set (Ch. 13: 1, 2, 5, 12, 19, 23, 27, 33, 34) Topics Water Composition (finish up) Complexation Water Pollution Problems Toxic Metals.

silver
Download Presentation

Chem. 250 – 12/02 Lecture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chem. 250 – 12/02 Lecture

  2. Announcements - I • Solutions to Furlough Questions and Homework will be posted soon • New Homework Set (Ch. 13: 1, 2, 5, 12, 19, 23, 27, 33, 34) • Topics • Water Composition (finish up) • Complexation • Water Pollution Problems • Toxic Metals

  3. Water ChemistryA Left-Over Problem • A water sample has a measured alkalinity of 0.4 mM and a pH of 6.7. Determine the concentration of [OH-], [HCO3-], [CO32-], and [CO2].

  4. Water ChemistryChemical Reactions Solubility of other metals: - Na and K are soluble but usually not present in soils at high concentrations. - Many other metals that are present in soils in reasonable concentrations (e.g. Al, Fe) are not very soluble at “normal” pH values. Example: Al(OH)3(s) ↔ Al3+ + 3OH- Ksp = [Al3+][OH-]3 = 10-33 At pH = 8, [Al3+] = 10-15 M, at pH = 6, [Al3+] = 10-9 M

  5. Water ChemistryChemical Reactions • Complexation reactions: • Many metals exist in water with total dissolved concentrations greater than equilibrium. This can be cause by formation of metal-ligand complexes. • Examples (for Al3+) Al3+ + 4OH-↔ Al(OH)4- K = 2.0 x 1033 Al3+ + 3C2O42-↔ Al(C2O4)33- K = 4.0 x 1015

  6. Water ChemistryChemical Reactions

  7. Water ChemistryChemical Reactions • Redox Reactions: • Under conditions with plentiful oxygen, most elements are present in oxidized forms examples: SO42-, CO32-, colloidal Fe(OH)3, NO3- (most oxidized forms) • Under conditions with depletion of oxygen, decomposition products tend to be in reduced forms: examples: FeS, CH4, NH3

  8. Water ChemistryWater Pollution Issues Acid Rain - Man is a source of both acidic precursor gases (SO2 and NOX) and basic precursors (NH3 and soil dust) - In regions downwind of large SO2 and NOX sources (industrial areas), acidic rain is expected from oxidation products (H2SO4 and HNO3) - Besides acid rain, harm can come from acidic snow and fog

  9. Water ChemistryWater Pollution Issues Acid Rain – continued Damage from acid rain depends on: - amount of excess acid (over natural) - regional extent of pollutions - ability of soils to buffer acid Carbonate containing soils tend to reduce damage from acid rain while granite or basaltic soils are carbonate poor and suffer more damage from acidification

  10. Water ChemistryWater Pollution Issues

  11. Water ChemistryWater Pollution Issues Acid Rain – continued In poorly buffered soils, pH drop is also accompanied by increased solubility of metals. In pH = 5, [Al3+] = 10-6 M => toxic effects start (e.g. precipitation of Al(OH)3 in fish gills)

  12. Water ChemistryWater Pollution Issues Acidic Mine Runoff In many mining regions, rock is rich in sulfides (e.g. FeS2) As this rock is exposed, the sulfides can be oxidized (e.g. 2FeS2 + 7O2 + 2H2O ↔ 2Fe2+ + 4SO42- + 4H+) Where sulfides are high enough in concentration, water runoff can have a pH less than zero Both the low pH and dissolution of heavier metals lead to increased toxicity

  13. Water ChemistryWater Pollution Issues Oxygen Depletion Depletion of oxygen in the ocean and lakes (usually seasonally) is a natural process Pollution is a larger problem in bodies of water that are thermally stratified (it is harder to restore oxygen levels) Water depleted of oxygen will support fewer fish species, and the chemistry changes in anoxic waters

  14. Water ChemistryWater Pollution Issues Oxygen Depletion – cont. Pollution can deplete oxygen content in the following ways 1) Thermal pollution (e.g. power plant outflow) 2) Organic compounds that consume oxygen 3) Nutrients (e.g. N or P containing fertilizers) which promote algae growth (but lead to oxygen consumption when algae peak)

  15. Water ChemistryWater Pollution Issues Oxygen Depletion – cont. The ability of polluted water to consume oxygen can be measured through two tests (biological oxygen demand or BOD and chemical oxygen demand or COD). This will depend on the concentrations of organic carbon and the forms present.

  16. Water ChemistryWater Pollution Issues Sewage Problems: Raw sewage is a big source of oxygen demand Sewage Treatment: - Primary Treatment: removal of most suspended organic material (physically based) - Secondary Treatment: decomposition of remaining organic compounds (biologically based) - Tertiary Treatment: removal of other chemicals (nitrates and phosphates) plus disinfection (most common with chlorine gas)

  17. Water ChemistryWater Pollution Issues Addition of chlorine for disinfection results in other problems – creation of disinfectant byproducts (DBPs) DBPs include trihalomethanes which are toxic

  18. Water ChemistrySecond Set of Questions • The Ksp for Fe(OH)2 and Fe(OH)3 are 7.9 x 10-16 and 1.6 x 10-39. What are saturated concentrations of Fe2+ and Fe3+ at a pH of 5 and 7? What will happen as hot spring water containing high concentrations of Fe2+ is introduced to a river with pH of 8 and with oxygen present? If Fe is measured and known to be in the form Fe3+ with a conc. of 1.3 μM at pH of 7.0, what might this suggest? • Why do the concentrations of some elements in water reflect concentrations in soils while not for other elements?

  19. Water ChemistrySecond Set II • Acidic rain will cause greater or lesser damage when a water basin has the following types of rocks? a) granite b) limestone c) basalt d) marble • Statues made from the above types of rock will be affected most from acidic precipitation? • As run-off from a mine is introduced into a river, what transformations occur to dissolved metals? • Lakes under which of the following conditions are more susceptible to oxygen depletion • Summer (vs. winter) b) cold climate • High altitude d) lakes (vs. rivers)

  20. Toxic Metals (Chapter 13) • Four metals covered in detail: Pb, Hg, Cd, and As • Behavior is somewhat similar (can bioaccumulate, difficult to remove or “destroy”, can form different species, density is high) • These metals all have industrial sources (although natural As is very important also)

  21. Toxic MetalsBioaccumulation • Bioaccumulation • When humans are exposed to constant concentrations (e.g. Pb in air or Hg in fish), and elimination rates are slow, concentrations can become much higher than in the environment • Example: • A 0.50 kg rat injests 0.20 mg of Pb per day • Half-life in rat is 7 days (originally Lifetime) • What is steady-state amount/concentration?

  22. Toxic MetalsBioaccumulation • Bioaccumulation • If other animals have slow excretion rates, animals at the top of the food chain typically will have higher metal concentrations (e.g. tuna fish, swordfish, sharks in ocean; polar bears)

  23. Toxic MetalsAnalysis Methods • Atomic Spectroscopy (and Mass Spectrometry) Most Commonly Used • Variety of Possible Methods: • Atomic Absorption Spectroscopy (AAS), • Atomic Emission Spectroscopy (AES) • Mass Spectrometry (MS) • X-Ray Fluorescence (XRF) • X-Ray Fluorescence has the advantage of often needing no sample preparation (can analyze solid or liquid samples) • For other methods, the first step involves atomization (conversion to “free” atoms in gas phase or simple ions for atomic mass spectrometers)

  24. Toxic MetalsAnalysis Methods • Atomic Spectroscopy tends to have very good sensitivity (ability to detect small quantities) due to the narrow spectral lines • The first step (and often difficult part) involves atomization (conversion from ions in liquid to atoms in gas phase) • Three atomization methods are common: • flame (mostly with AAS) • graphite furnace (only with AAS) • inductively coupled plasma (ICP) – with AES or MS

  25. Toxic MetalsAnalysis Methods • Flame Atomization • used for liquid samples • liquid pulled by action of nebulizer • nebulizer produces spray of sample liquid • droplets evaporate in spray chamber leaving particles • fuel added and ignited in flame • atomization of remaining particles and spray droplets occurs in flame • optical beam through region of best atomization light beam burner head spray chamber oxidant (air or N2O) fuel (HCCH) nebulizer sample in

  26. Toxic MetalsAnalysis Methods Graphite Tube in Chamber (not shown) • Electrothermal Atomization (Process) • Sample is placed through hole onto L’vov platform • Graphite tube is heated by resistive heating • This occurs in steps (dry, char, atomize, clean) Sample in L’vov Platform Ar in chamber flow stops and optical measurements made Clean + cool down T dry char atomize time

  27. Toxic MetalsAnalysis Methods • Inductively Coupled Plasma (ICP) • A plasma is induced by radio frequency currents in surrounding coil • Once a spark occurs in Ar gas, some electrons leave Ar producing Ar+ + e- • The accelerations of Ar+ and e- induce further production of ions and great heat production • The sample is introduced by nebulization in the Ar stream • Much higher temperatures are created (6,000 K to 10,000 K vs. <3500 K in flames) ICP Torch RF Coil Quartz tube Argon + Sample

  28. Toxic MetalsAnalysis Methods AA Spectrometers Flame or graphite tube Lamp source monochromator Light detector • The lamp is a hollow cathode lamp containing the element(s) of interest in cathode. The lamp must be changed to analyze a different element. • A very narrow band of light emitted from hollow cathode lamps are needed so that for absorption by atoms in flame mostly follows Beer’s law • The monochromator serves as a coarse filter to remove other wavelength bands from light and light emitted from flames

  29. Toxic MetalsAnalysis Methods Emission Spectrometers • In emission measurements, the plasma (or flame) is the light source • A monochromator or polychromator is the means of wavelength discrimination • ICP-AES is faster than AAS because switching monochromator settings can be done faster than switching lamp plus flame conditions • In ICP-MS, a mass spectrometer replaces the monochromator Plasma (light source + sample) Monochromator or Polychromator Light detector or detector array Liquid sample, nebulizer, Ar source

  30. Toxic MetalsAnalysis Methods X-Ray Fluorescence • X-Rays interact with matter by causing transitions with inner shell electrons • An incoming X-ray will cause an inner shell electron to be removed • An outer shell electron will replace the inner shell electron causing an X-ray emission • The emitted X-ray will have a wavelength dependent upon the element • X-Ray Fluorescence is not as sensitive or accurate as other methods inner shell Pb e- e- outer shell

  31. Toxic MetalsAnalysis MethodsComparison of Instruments

  32. Toxic MetalsLead • Sources: • Ingestion from lead pipes, lead containing glass or ceramics, lead paint • Inhalation (Was a problem in past with leaded gasoline) • Toxicity: • Affects normal development (more of a problem with children) • Slow excretion rates • Analysis: Can use most of methods

  33. Toxic MetalsMercury • Sources: • Industrial Sources (in various products) • Coal Combustion • Food Chain Bioaccumulation • Forms: • Reduced Hg (Hgo) (vapor or liquid) • Inorganic Hg (e.g. Hg2+) • Organic (CH3Hg+) – much more toxic because of slower excretion rate and stability • Toxicity: Neurological Problems • Analysis: Cold vapor Atomization Methods (High T methods are not efficient)

  34. Toxic MetalsCadmium • Sources: • Common industrial pollutant – released in industrial processes • Also in cigarette smoke • Toxicity: • Cd can replace Ca in bones • Analysis: Can use most of methods

  35. Toxic MetalsArsenic • Sources: • Industrial sources (e.g. pesticides • Naturally present in water in certain regions • Toxicity: • Accute effects • Carcinogen • Analysis: Difficult to atomize As (most common using hydride technique)

  36. Toxic MetalsQuestions • Why do animals higher on the food chain have higher concentrations of Hg? • List 3 methods for analyzing metals • Which method is best for a fast survey of soil samples to find soils with high metal concentrations? • Which method is best for determining multiple elements at low concentrations? • Why is graphite-furnace AA a slow technique? • Which metal has a significant natural source?

  37. Toxic MetalsQuestions • An organic form of Hg is found in river sediments. Bottom feeding fish have an uptake rate of 70 μg Hg per day. If the half-life of this form of Hg is 78 days, what would be the steady state mass of Hg in the fish?

More Related