Faster, Cheaper, Safer Remediation & Prevention Solutions

1. Faster, Cheaper, Safer Remediation & Prevention Solutions September 2011 Spill Green permanently traps oils, fuels and acids for safe and economic disposal

2. Spill Green products are eco-friendly, non-toxic, non-hazardous, non-corrosive and can be used in all weather & temperature conditions • Spill Green products are listed on Canada’s Domestic Substances List • Spill Green LS is Environment Canada and EPA listed for use on water • Spill Green bi-products are safe to dispose and may be recycled

3. Spill Green®Solutions… • Safety – Quickly mitigate hazards & reduce risks associated with deployment, waste handling & disposal. • Cost Reduction - Significantly reduce logistic costs in residue disposal compared to traditional methods. • Residue Reduction - Decrease amount of residue & bi-products by 10-15x. Bi-products are non-leaching, non-flammable, non-toxic. • Improved Economics & Performance – Meet or exceed regulatory requirements – Environment Canada and EPA listed. • Broader Spectrum of Utility – Use on a broad range of media (surfaces, soils, water, etc.) & hazardous chemicals (more than competing technologies). * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

4. Responsible Solutions • Our patented technologies deliver effective new solutions for a wide range of hazardous spills. • Old strategies such as dispersants, adsorption materials that can leach or be squeezed to release spill material & bio products that require specific temperature and oxygen levels are not always effective under new environmental standards. • Spill Green products are positioned as key tools in your “toolbox” of spill preparedness. Spill Green delivers options to effectively and safely manage a wide range of spill materials & site conditions.

5. Responsible Solutions • Spill Prevention – vessels, oil rigs, pipelines & transportation to utilize spill kits. Like smoke detectors or seat belts, hazards & damage are mitigated immediately following the incident, before the responders arrive. • Neutralize Hazards – when hazards are neutralized, adverse effects on the environment, water, animals above and below water surface, responders etc are exponentially minimized. Activities are no longer focused on toxic/hazardous recovery. • Metrics of Success – we believe strategies that demonstrate improved safety, faster response, generate non-hazardous bi-products and reduced costs need to be established as “Requirements” in the decision-making process. • Green Procurement – products & procedures used by or purchased by government agencies & affiliates receive higher priority or status if they meet/exceed environmental/safety criteria.

6. Spill Green® Products Spill Green™LS Use on Hard Surfaces (HS) and Soils for fuel, oil and other hydrocarbons, antifreeze and solvents Spill Green™LS Use on pooled Liquid Spills (LS) of fuel, oil and other hydrocarbons on water or land Spill Green™LS For Acid Neutralization (AN) & clean-up of acid spills & residue from acidic products

7. Spill Green®LS • For pooled spills of fuel & oil on land or water • Non-leaching, Non-flammable bi-product • Floats indefinitely before and after deployed or until recovered • Environment Canada & EPA listed • Food Grade Polymer • All temperature conditions • Bi-product may be recycled

8. Spill Green®LS • Use exact amount for any size spill in all weather conditions • Non-leaching, non-toxic, non-flammable • Improved staff safety • Non-hazardous bi-product • Less $’s to dispose compared to conventional products • Patented, Exclusive • Can be used on leading edge of spill to form a mechanical boom • Quick response

9. Spill Green®LSPatented Technology • Spill Green LSis a food grade SEEPS tri-block granular copolymer that once broadcast over a spill, rapidly absorbs the hydrocarbon in minutes as plasticization of the elastomer occurs. Hydrocarbons and other non-polar contaminants become microencapsulated on a molecular level in a non-leachable, non-reactive, copolymer matrix. The resultant bi-product may simply be thrown out*, recycled or burned as a bulk fuel. Marvel Mystery Oil is a registered trademark of Turtle Wax®, Inc. * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

10. Spill Green®LSDiesel Spill on Water • Two quarts diesel fuel spilled on edge of pond. • Spill was contained by boom. • Spill Green LS was distributed over the spill and allowed time to microencapsulate (approx 20 minutes). NOTE 1: Booms can be made from Spill Green LS at your location as a secondary product. * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

11. Spill Green®LSDiesel Spill on Water • The resultant mat was folded and easily removed from the surface of the water. • Bi-product can be used as bulk fuel. • Where facilities exist, can be recycled into new products. NOTE 2: Waiting longer than 20 minutes before recovering the LS bi-product allows the LS to produce a more complete and ridged residue making it easier to recover. In the pictures associated with this document about 45 minutes passed and the resulting residue was like a blanket that could be pulled along the surface of the water and was folded up like a blanket. * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

12. Spill Green®LSPooled Crude on Gravel • Spill Green LS can be used on pooled hydrocarbon liquids, on any surface. • The pictures show how pooled crude oil on gravel can be solidified by adding LS and waiting for the LS to perform. • If the gravel/aggregate if very fine in texture, the LS residue solid will have some of the gravel/aggregate attached to the residue. • Spill Green LS can be used any where pooled hydrocarbon liquids are present.

14. Portable • Self-contained & powered • Propels LS product with air or water • Up to 100 lbs/minute • All temperatures • Deploy from ships/rigs • Immediate response • Simple to use • Ideal for spills of any size • Accurate, efficient

15. Spill Green ®LSUsed as an Active Barrier Illustration Place a layer of sand in the bottom of a cup. Place a .5-1cm of Spill Green LS on top of the sand. Place another layer of sand on top of the Spill Green LS. Add any amount of oil or hydrocarbons on top of the sand. NOTE: the oil flows through the top layer of sand but stops when it hits the LS. Also NOTE: after 24 hours the hydrocarbon will not penetrate the Spill Green LS layer. The picture demonstrates how Spill Green LS can be used as a barrier to further soil/sand/aggregate contamination.

16. Spill Green ®LS Key Benefit Summary

17. Spill Green ®HS • Contaminants such as oil, gasoline or diesel are easily remediated from hard surfaces resulting in a non-hazardous, environmentally friendly solid residue that can simply and easily be recovered for easy disposal or left on-site. • Spill Green HScan be mixed with contaminated soils to achieve excellent stabilization & may be left in situ. • Effective clean-up of shorelines, Brownfields, roadways, parking lots, job sites, forest floors, machinery & equipment and contaminated soils.

18. Spill Green ®HS • Through a patented micro-encapsulation process, the hazardous characteristics of the waste such as ignitability, corrosivity, reactivity, and toxicity are quickly eliminated. • HS is a two-part solution that rapidly desorbs, emulsifies & binds spilled materials into a solid, inert and stable amorphous silica (sand) residue. • HS is available in various sized containers & can utilize a simple hand pump sprayer or industrial power sprayers for commercial, ground & pavement clean up.

19. Spill Green ®HS How it works A sample of 10W-30 motor oil on cement Step 1 HS added Brushed to emulsify Step 2 HS added Sheen & oily residue is removed Brushed to Microencapsulate Brushed into dustpan

20. Spill Green ®HS Case Studies Spill Green HS deployed on aggregate in a crude oil tank battery The pictures in this grouping show a demonstration in the staked area being cleaned up or remediated with the HS product. A second application of both HS Step One & Two product was applied. This final picture shows the remediated or cleaned aggregate. An initial application of HS Step One followed by an application of HS Step Two in the demo area Because the aggregate was saturated to about 15cm, the area was raked to expose the remaining untreated aggregate. Note: The aggregate will require cleaning again should the treated aggregate be covered again with oil. Also, note that since the product is silica, the residue will always take on some of the colour of the contaminate it is encapsulating.

21. Spill Green ®HS Case Studies Hydraulic Oil Spill on Roadway • In March, 2007, a large truck accidentally released 30+ gallons of hydraulic oil along approximately 125 meters of roadway. The roadway was slick and unsafe for use. • Taking about twenty minutes, approximately 30 gallons of each of the Step 1 and Step 2 HSproduct was sprayed onto the spill area. By the time the length of the spill was sprayed, the patented technology had encapsulated the hydraulic oil and was dry where the application began. • The resultant residue was swept with a Bobcat sweeper, resulting in approximately one-half of one 55 gallon barrel of waste. The environmental contractor estimated that 30 to 40 bags (40 lb bags) of clay absorbent would have normally been used resulting in seven to eight barrels of waste. Spill GreenHS remediated and encapsulated the hydraulic oil leaving the road surface dry, eliminating the street safety hazard and leaving no hydrocarbon odour.

22. Spill Green ®HS Truck Leak Clean-up Hydrocarbon leak from ruptured saddle tank and clean-up using Spill GreenHS, Oklahoma, 2008

23. TPH Analysis Results forCommon Hydrocarbons The above substances were treated with Spill Green HS. Samples were TCLP extracted, per EPA 1311, followed by TPH analysis, per EPA 8015B and 8015M. Results were verified by an independent laboratory.

24. Spill Green ®AN • Neutralizes acids on contact. • Stops acids from entering lakes and rivers & habitats. • Simply pour or pre-treat Spill Green®A onto the spill site to quickly eliminate the hazardous characteristics. • Forms a solid precipitate. • Reduces risk, liability and costs. • Safe, simple and effective. • Colour changes to show neutralization. * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

25. Spill Green ®AN • Can be used to clean up acids such as: • Hydrochloric & Muriatic Acid • Battery Acid • Acetic and Oxalic Acid • Sulfuric and Nitric Acid • Chlorosulfonic Acid • Phosphoric Acid • Mercaptoacetic Acid • Glycolic, Chromic and Selenic Acid * All wastes, including hazardous wastes, must be properly disposed in accordance with federal, state/provincial and local laws.

26. If you spill, Spill Green®! • Protect water quality & environment. • Protect human health. • Reduce cost of remediation. • Improve staff safety. • Minimize burden on land-fills. • Easy to use, handle and store. • Exclusive patented technologies. • Traps hazardous characteristics at moment of clean-up. • Important tool in your “toolbox.” • Env Canada and EPA listed. • Spill Green Inc is a Canadian Company www.SpillGreen.com

27. All product information and MSDS information is available 24/7 at: www.SpillGreen.com • Products are available in bulk quantities & shipped across North America and internationally. • Ideal Eco-friendly solutions for consumers, commercial and emergency response applications.

28. Safe, cost-effective, eco-friendly remediation technologies that deliver superior performance www.SpillGreen.com