1 / 6

Garmin 327 Transponder

Garmin 327 Transponder. Cirrus Transition Course. 12/23/03. The system information, procedures and guidelines found in this presentation are for Reference Only.

simon-barnes
Download Presentation

Garmin 327 Transponder

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Garmin 327 Transponder Cirrus Transition Course 12/23/03

  2. The system information, procedures and guidelines found in this presentation are for Reference Only. The information & procedures in this presentation have been taken from the FAA Approved Airplane Flight Manual and Pilot’s Operating Handbook (POH). The Information & Procedures in this presentation DO NOT SUPERSEDE the Information & Procedures in the POH. In the event of conflict, the POH shall take precedence.

  3. General • Mode A and Mode C 4096-code transponder • Incorporates timer features into transponder interface

  4. Controls and Functions • IDENT – activates Special Position Identification (SPI) signal for 18 seconds • VFR • Press One – selects ‘1200’ as active code • Press Twice – reverts to previously active code • ON – engages reply to Mode A interrogations • STBY – halts response to all ATCRBS interrogations

  5. Controls and Functions • FUNC – cycles transponder through display functions • Pressure Altitude – displays current pressure altitude as received from altitude digitizer • Flight Time – begins when unit senses liftoff • Count Up Timer • Count Down Timer • START/STOP • CRSR – cycles position in active field

  6. Features • Automatic ALT/STBY Selection • When groundspeed is greater than 35 knots, unit automatically selects ALT mod • When groundspeed is less than 35 knots + 10 seconds, unit automatically selects STBY

More Related