1 / 30

Summer Youth Program: Internal Protocols: RIP & IGRP

Summer Youth Program: Internal Protocols: RIP & IGRP. To route a router need to know: Remote Networks Neighbor Routers All Possible routes to remote network The absolute best route to all remote networks Maintain and verify the routing information. What is Routing?. A. D.

sinjin
Download Presentation

Summer Youth Program: Internal Protocols: RIP & IGRP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Summer Youth Program: Internal Protocols: RIP & IGRP

  2. To route a router need to know: Remote Networks Neighbor Routers All Possible routes to remote network The absolute best route to all remote networks Maintain and verify the routing information What is Routing? A D C B

  3. What interface will the router send out a packet if it has destination address of 10.10.10.18? Basic Path Selection

  4. Basic IP Routing >ping 172.16.1.2 172.16.2.0 172.16.1.0 172.16.3.1 172.16.3.2 e0 e0 s0 A B B s0 172.16.2.2 Host A 172.16.1.1 172.16.2.1 172.16.1.2 Host B

  5. Routing/PDU Example:Host A Web browses to the HTTP Server…. 1. The destination address of a frame will be the _______________________ 2. The destination IP address of a packet will be the IP address of the ________________________________ 3. The destination port number in a segment header will have a value of __

  6. Routing/PDU Example:Host A Web browses to the HTTP Server…. 1. The destination address of a frame will be the Ethernet 0 on Lab A 2. The destination IP address of a packet will be the IP address of the NIC of the HTTP server 3. The destination port number in a segment header will have a value of 80

  7. Static Routes Stub Network 172.16.1.0 172.16.2.0 SO SO A A B B 172.16.3.1 172.16.3.2 Routes must be unidirectional

  8. Static Route Configuration ip route remotenetwork [mask] {address|interface} [distance] [permanent] Router(config)#ip route remote_network mask next_hop

  9. Static Route Example Stub Network 172.16.2.0 172.16.1.0 SO SO A B B 172.16.3.1 172.16.3.2 ip route 172.16.1.0 255.255.255.0 172.16.3.2or ip route 172.16.1.0 255.255.255.0 s0

  10. Default Routes Stub Network 172.16.1.0 172.16.2.0 SO SO A B B 172.16.3.1 172.16.3.2 ip route 0.0.0.0 0.0.0.0 172.16.3.1 ip classless

  11. Routing vs. Routed • Routing protocols are used between routers to: • Determine the path of a packet through a network • Maintain routing tables • Examples? • Routed protocols are: • Assigned to an interface • Once the path is determined by the Routing protocol, determines method of delivery • Examples?

  12. Routing Protocols EGPs: BGP IGPs: RIP, IGRP Autonomous System 1 Autonomous System 2 • An autonomous system is a collection of networks under a common administrative domain. • IGPs operate within an autonomous system. • EGPs connect different autonomous systems.

  13. Classful routing protocols do not include the subnet mask with the route advertisement. Within the same network, consistency of the subnet masks is assumed. Summary routes are exchanged between foreign networks. Examples of classful routing protocols: RIP Version 1 (RIPv1) IGRP Classful Routing Overview

  14. Classless routing protocols include the subnet mask with the route advertisement. Classless routing protocols support variable-length subnet masking (VLSM). Summary routes can be manually controlled within the network. Examples of classless routing protocols: RIP Version 2 (RIPv2) EIGRP OSPF IS-IS Classless Routing Overview

  15. Administrative Distance Router B Router A IGRPAdministrative Distance=100 RIPAdministrative Distance=120 Router C Router D Default Administrative Distance Directly Connected: 0 Static Route: 1 RIP: 120 IGRP: 100 EIGRP: 90 OSPF: 110

  16. Distance Vector Distance—How farVector—In which direction A D C B Routing Table Routing Table Routing Table Routing Table Distance vector algorithms do not allow a router to know the exact topology of an internetwork. All routers just broadcast their entire routing table out all active interfaces on periodic time intervals

  17. Discovering Routes

  18. Routing Tables Populated

  19. Routing Loops

  20. Router Loops

  21. RIP Overview 64kbps T1 T1 • Hop count metric selects the path, 16 is unreachable • Full route table broadcast every 30 seconds • Load balance maximum of 6 equal cost paths (default = 4) • RIPv2 supports VLSM and Discontiguous networks T1

  22. router RIP router RIP network 172.16.0.0 network 192.168.10.0 network 172.16.0.0 network 10.0.0.0 RIP Routing Configuration Router(config)#router rip Router(config-router)#network network-number* 192.168.10.0 10.3.5.0 172.16.10.0 *Network is a classful network address. Every device on network uses the same subnet mask

  23. Allows the use of variable length subnet masks (VLSM) by sending subnet mask information with each route update Distance Vector – same AD, and timers. Easy configuration, just add the command “version 2” under the router rip configuration RIP Version 2 router rip network 10.0.0.0 version 2

  24. Two networks of the same classful networks are separated by a different network address Discontiguous Addressing 192.168.10.0/24 192.168.10.0/24 10.1.1.0/24 • RIPv1 and IGRP do not advertise subnet masks, and therefore cannot support discontiguous subnets. • OSPF, EIGRP, and RIPv2 can advertise subnet masks, and therefore can support discontiguous subnets.

  25. Maybe you don’t want to send RIP updates out your router interface connected to the Internet. Use the passive-interface command: Router(config)#router rip Router(config-router)#passive-interface serial0 Passive Interface X Updates Internet S0 Gateway This allows a router to receive route updates on an interface, but not send updates via that interface

  26. Router#show ip protocols Router#show protocols Router#show ip route Router#debug ip rip Router#undebug all (un all) Verifying RIP

  27. Interior Gateway Routing Protocol - Cisco Proprietary Uses bandwidth and delay of the line by default to select best path IGRP Router A Router B Autonomous System Router C Router D Requires Autonomous System number for activation

  28. The important IGRP characteristics are as follows: More scalability than RIP Fast response to network changes Sophisticated metric Multiple-path support IGRP vs. RIP

  29. router IGRP 10 router IGRP 10 network 172.16.0.0 network 192.168.10.0 network 172.16.0.0 network 10.0.0.0 Configuring IGRP Router(config)#router igrp autonomous-system Router(config-router)#network network-number* 192.168.10.0 10.3.5.0 172.16.10.0 *Network is a classful network address. Every device on network uses the same subnet mask

  30. Router# show ip route Router# show ip protocols Router# debug ip igrp transaction Router# debug ip igrp events Router# undebug all (un all) Verifying IGRP

More Related