1 / 4

Single Point Cutting Tool

Tool Bit Geometry. Single Point Cutting Tool. Body of the Tool. Back Rake controls the direction of the chip,. Counteract the pressure against the tool from the work by pulling the tool into the work. Side Rake along with back rake controls the chip flow.

sissy
Download Presentation

Single Point Cutting Tool

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tool Bit Geometry Single Point Cutting Tool Body of the Tool

  2. Back Rake controls the direction of the chip, • Counteract the pressure against the tool from the work by pulling the tool into the work • Side Rake along with back rake controls the chip flow • Nose Radius makes the finish of the cut smoother & strengthens the tip as sharp point is fragile • Front clearance angle is usually 8 degrees • Side clearance angle is 10-15 degrees

  3. A form tool is precision-ground into a pattern that resembles the part to be formed • This form tool is for a shift knob on a motorcycle • This tool has an 8-degree rake from top to bottom for clearance • AForm tool can be used as a single operation and therefore eliminate many other operations • Feed into the work is usually slow, .0005" to .0012" per revolution

  4. Different Tool Bits Tool Bits Tool Holder Tool Holders Tool Inserts (Use & Throw type)

More Related