1 / 23

SmartWire

SmartWire. Less wiring by shifts the I/O level to the contactor. Today : Expensive wiring of the I/Os from the PLC. PLC xyz. Moeller PLC. NOW : Simple wiring and shifting the I/O level to the contactor. easynet CANopen. Profibus DP. System overview. 2x Status DIL and PKZ.

skull
Download Presentation

SmartWire

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SmartWire Moeller Holding GmbH Seite - 1

  2. Less wiring by shifts the I/O level to the contactor Today :Expensive wiring of the I/Os from the PLC PLC xyz Moeller PLC NOW :Simple wiring and shifting the I/O level to the contactor easynet CANopen Profibus DP Moeller Holding GmbH Seite - 2

  3. System overview 2x StatusDIL and PKZ up to16 Motor starter 1x command SmartWire Gateway 24 VDC for monitoring 24 VDC Control power (with Emergency Stop) Moeller Holding GmbH Seite - 3

  4. SmartWireSystem modules of the assortment • For connection to the automation level • 1 Gateway easyNet/CANopen • 2 Gateway PROFIBUS DP • 3 XI/ON-Gateway with SmartWire slice (www.microinnovation.com) • For system extension • 4 I/O module • For switching an protection • 5 Direct starter MSC up to 15 kW based on standard switch gear • For building groups of motor starters(Emergency stop, repowering the control power) • 6 SmartWire Power moduleFor connection of motor starter MSC • 7 SmartWire module for fitting at the contactor • 8 SmartWire cable – Connect, don‘t wire • 9 Direct starter MSC-D with SmartWire module • 10 Reverse starter MSC-R with SmartWire module 1 2 3 9 10 5 5 6 4 8 7 Moeller Holding GmbH Seite - 4

  5. SmartWire Module for DILM 7 to DILM 32 X1 X2 F Ready G X3 X4 X1, X2 : Monitoring NHI-E-PKZ0 (Switch-on condition for DIL) X3, X4 : Interlocking the contactor coil Ready : LED Ready (green) F : Indication contactor status (mech.) G : Cable guide Status from the contactor Control contactor coil Moeller Holding GmbH Seite - 5

  6. EASY223-SWIRE Gateway easy223-SWIRE 24 VDC Gateway 24 VDC SmartWire LED: - Status Field bus - Status SmartWire - Power SmartWire - Ready Auto addressing Field bus easy-NET DIP-Switch for - easy-NET/CANopen selection - Node-ID at CANopen SmartWire Moeller Holding GmbH Seite - 6

  7. SWIRE-GW-DP Gateway SWIRE-GW-DP 24 VDC Gateway 24 VDC SmartWire LED: - Status Field bus - Status SmartWire - Power SmartWire - Ready Auto addressing Field bus DIP-Switch for PROFIBUS DP address SmartWire Moeller Holding GmbH Seite - 7

  8. I/O Module SWIRE-4DI-2DO-R Applications for: - DIL M 40 to DIL M 150 - SGL - Solid-State-Relays - monitoring MCBs - other digital I/O 2 Inputs 1 Relay Output Status LED SmartWire SmartWire 2 Inputs 1 Relay Output Moeller Holding GmbH Seite - 8

  9. Power Module SWIRE-PF Power supply 24 VDC for: - new emergency stop group - Re-powering 24 VDC Power LED SmartWire SmartWire Moeller Holding GmbH Seite - 9

  10. Communication system • Up to 16 units per gateway • Automatic configuration via push button • Length max. 4 m • Powering the electronic from the gateway (independent from the emergency stop) • Powering the contactor coil is integrated • Failure of one unit has no impact to the other units • Exchange of an unit by disconnecting the communication line • Response times : • 20 ms for commands (all motor starter simultaneously) • 50 ms for status messages (typical value for 8 motor starter) • 80 ms for status messages (worst case for 8 motor starter) Moeller Holding GmbH Seite - 10

  11. easyNet Gateway SmartWire Connection via easyNet XC200 easy800 EC4P MFD-Titan Max. 8 devices SmartWire(up to 16 devices per gateway) SmartWire Moeller Holding GmbH Seite - 11

  12. easyNet SmartWireApplication with easy800 via easyNet easy800 easySoft Moeller Holding GmbH Seite - 12

  13. CANopen Gateway SmartWire Connection via CANopen XC200 EC4P Touch Text SmartWire(up to 16 devices per gateway) SmartWire Moeller Holding GmbH Seite - 13

  14. Profibus-DP Gateway SmartWire Connection via Profibus DP XC200 Siemens S7 … Touch Text SmartWire(up to 16 devices per gateway) SmartWire Moeller Holding GmbH Seite - 14

  15. Configuration of SmartWire in Step 7 SmartWire - DP - Interface as PROFIBUS unit Hardware catalogue of SmartWire units Target configuration of the SmartWire IO mapping of the S7-CPU and SmartWire Moeller Holding GmbH Seite - 15

  16. Field bus connection with additional I/O For future extensions Gateway I/O slices Motor starter Interface for SmartWire MSC with PKZM0 + SmartWire Module for DILM Moeller Holding GmbH Seite - 16

  17. 1SWIRE DIA Rdy SW Cfg USW UAUX MOELLER 1 2 3 4 5 6 E R I W S XI/ON XNE-1SWIRE Module Communicationslice for networking motor starter • 1 slice per SmartWire line • max. 3 slices per gateway • 16 SmartWire devices • Per device 4Bit input, 4Bit output • SWIRE-DIL: • DI • Bit 0: Status DIL • Bit 1: Status PKZ • Bit 2: free • Bit 3: free (Slave diagnostic adjustable) • DO • Bit 0: ON command • Bit 1..3: free Moeller Holding GmbH Seite - 17

  18. The kit for all solutions Remote I/O + Motor starter with SmartWire Motor starter with SmartWire Module + Component-adapter for busbar Motor starter with SmartWire Module Motor starter Components Control circuit- wiring and save PLC I/O Reduce wiring of the control circuit and main circuit Plug and play for I/O and Motor starter Save mounting space and wiring of the main circuit Moeller Holding GmbH Seite - 18

  19. SmartWireApplications Motor starter up to 15 kW size I + II Motor starter up to 560 kW, contactors up to 2000 A MCB Soft starter + + + with SmartWire I/O Module with SmartWire I/O Module with SmartWire Module for DILM with SmartWire I/O Module SWIRE-4DI-2DO-R SWIRE-4DI-2DO-R SWIRE-4DI-2DO-R SWIRE - DIL Moeller Holding GmbH Seite - 19

  20. Abstract I • Use standard devices and device accessories (DIL + PKZ) • Substitution of the controlwiring • Simplification of the design and the documentation by less terminals • Less wire ducts at the switchboard Moeller Holding GmbH Seite - 20

  21. Abstract II • Quick mounting and commissioning with toolless plug connection and snap up the SmartWire Module for DILM • Using of all accessories of the xStart system • Re-fitting for all contactors of the xStart line • Free I/O for connection to the system (e.g. incoming breaker) Moeller Holding GmbH Seite - 21

  22. Abstract III • Easy handling with addressing by push button only • Automatic addressing requires no special knowlegth of communication systems Moeller Holding GmbH Seite - 22

  23. Moeller Holding GmbH Seite - 23

More Related