Warehouse Management (Part 2) EGN 5622 Enterprise Systems Integration Fall, 2015

1. Warehouse Management(Part 2)EGN 5622 Enterprise Systems IntegrationFall, 2015

2. Process Management and ControlandPhysical InventorySAP Implementation

3. WM Part 2 Overview WM Process Management and Control Logistics Execution: Goods Issue (outbound delivery) Goods movement: Stock transfer and transfer posting WM Physical inventory procedures

4. Logistics Execution - Process Overview: Goods issue

5. Goods Issue Process for Outbound Delivery Steps

6. Goods Issue Process for Outbound Delivery The next step after sales order is to create an Outbound delivery. During creation of outbound delivery, a picking storage location is determined for each item in the outbound delivery. If the storage location has been assigned a warehouse number, the outbound delivery displays the warehouse number. In addition, the system assigns an overall picking status and a stock removal status.

7. Outbound Delivery Status 1: Outbound delivery created OPS: Overall Pick status; WM: Overall WM status; C: Pick status; GM: Total gds mvt status; BS: Billing status; TS: Trns Plan status; POD S: Proof of delivery status

8. Goods Issue Process for Outbound Delivery: Transfer order After outbound delivery, the removal from storage is carried out using transfer order. There is no transfer requirement for creating a transfer order for a delivery. The completion of picking process is reported to the system through confirmation of the transfer order.

9. Goods Issue Process: Good Issue After confirmation of transfer order (TO), the next step is to post the goods issue for the outbound delivery in inventory management (IM). Goods issue is a goods movement activity in which we issue goods from our inventory system. During goods issue, we need to reference that sales order and retrieve data from the sales order to verify material, quantity, and so on. Effects of Goods: Update physical inventory and stock value. Update inventory G/L account automatically. Update sales order history with the good issue.

10. Goods Movements

11. Goods Movement: Transfer posting and stock transfer Transfer posting: A change in the stock ID (material number) or the stock category of a material (unrestricted, under QA, or blocked). Transfer posting is not necessary to involve an actual (physical) goods movement. Stock transfer: Movement of materials from a particular storage location into another storage location. Stock transfer can take both within the same plant and between two plants. The two plants can be in the same company code or between different company codes. Physical goods movement is involved.

12. Goods Movement: Transfer posting and stock transfer Example of Transfer posting: - Stock to stock (Under QA to unrestricted) - Material to material Example of Stock transfer: - Storage location to storage location - Plant to plant

13. Transfer Posting/Physical Stock Transfer Only for unrestricted stocks and one FI document is created Only for unrestricted stocks and two FI document are created

14. Goods Movement: Transfer posting and Stock Transfer One-Step and Two-Step Procedures: A stock transfer/transfer posting consists of a goods issue from issuing point and a goods receipt at a receiving point. For one-step procedure, a transfer posting or stock transfer can be done with a single posting for all transfer posting or stock transfer. - Advantage of one-step procedure is that only a single transaction is generated.

15. Goods Movement: Transfer posting and stock transfer Two-Step Procedures: For some stock transfers, two-step procedure may be selected and two separate postings will be created. - Advantages for two-step procedure are enable to monitor stock status. Once goods issue has been posted from the issuing point, the stock is regarded as in transfer as the receiving point. - In the case of stock transfers between plants, the two-step procedure must be used if users have operation authorization only for one plant.

16. One-Step/Two-Step Procedures

17. Goods Movement: Transfer posting and stock transfer: Financial Accounting For a plant-to-plant transfer, both financial accounting and material requirement planning are affected. - A cross-plant stock transfer (in the same company code) leads to a value update in the stock accounts. An accounting document is generated parallel to the material document for the stock transfer. The stock transfer is valued at the valuation price of the material in the issuing point. - in the case of a cross-company-code stock transfer, two accounting documents are created: one for each company code. The offsetting is then made to a company code clearing account.

18. Cross-Plant Stock Transfer In the case of a plant-to-plant stock transfer, the two plants can be belong to the same company code or to different company codes.

19. Plant to Plant: One-Step/Two-Step Procedures In the case of one-step procedure, the goods issue and goods receipt are posted in a single material document. In two-step procedure, valuation always take places at the time of the first step.

20. Goods Movement: Stock Transport Order Stock transport order is similar to a purchase order, but the vendor is replaced by a supply plant. Stock transport order is integrated with MRP. A purchase requisition generated by MRP can be converted into stock transport order. The receipt by stock transport order can be planned at the receiving plant. Can add delivery costs and a forward/carrier in the stock transport order Goods receipt can be posted directly to consumption. In the case of a goods receipt into the warehouse, you may post the material to stock in quality inspection or blocked stock. The entire process (goods issue and goods receipt) can be monitored via the PO history.

21. Stock Transport Order

22. Physical Inventory Reasons for physical inventory: - Material requirement planning: for correction of incorrect stock quantities. - Accounting: Determination of material stocks for current assets.

23. Physical Inventory • Physical inventory is carried out on the basis of stock management units, or stock keeping unit (SKU). • A stock management unit is a non-divisible part of a stock of materials for which a separate book inventory exists. A stock management unit is uniquely defined by: • Material • Plant storage location • Stock type • Batch • Special stock, such as consignment stock • Each stock management unit of a material is counted separately, and the inventory differences are posted per stock management unit. • For example, you must record the quantities of unrestricted-use stock, stock in quality inspection, and blocked stock of a material at a storage location of a plant separately in each case.

24. Phases of the Physical Inventory • The physical inventory process comprises three phases: • 1). Creation of physical inventory documents • 2). Entry of count • 3). Posting of inventory difference • In the first phase, you create the physical inventory (PI) documents and print out the documents in order to start the counting process. • In the second phase, you enter the count results in the system. System then determines the inventory differences. If some of the results seem doubtful, you can arrange for a recount of the stock management units affected. In this case, further PI documents are generated. • 3. In the third phase, you post the inventory differences that have been identified. In the process, the stock quantity and stock value are updated and the stock accounts are updated in accounting.

25. Phases of the Physical Inventory

26. Physical Inventory Document PI document is created per plant and storage location. For special stocks, PI document may be created per plant, storage location, special stock, and vendor or customer or project. Storage bin or material group may be specified as futher grouping values. The statusof an item indicates whether or not the item has been processed, counted, posted, or recounted. You can use the status of a PI document item as a selection criterion in searches for physical inventory documents.

27. Physical Inventory Document Figure 256

28. Blocking Goods Movements • Block all goods movements • The system blocks all the stock management units of the relevant PI document by means of the Posting Block indicator in the PI document header. • 2. Freeze the book inventory • If it is not possible to block the goods movement for organizational reasons, you can freeze the book inventory in the PI document at the time of the count. • To do so, you set the Freeze Book Inventory indicator in the PI document. Thisprevents goods movements from changing the book inventory figure.

29. Blocking Goods Movements

30. Freezing the Book Inventory

31. Physical Inventory Status of an Item For physical inventory count, you must print out the PI document and distribute to the persons responsible for the count. When entering the physical inventory count, you can enter a percentage variance of the count quantity from the book inventory, above which the system issues a warning message. When the entered data is saved, the system determines the book inventory in the system. The difference between the count result and this book inventory is the inventory difference.

32. Physical Inventory Status of an Item • You can analyze this difference via the list of differences. The list of differences contains the following information on each item: • 1) Quantity counted • 2) Book inventory • 3) Difference quantity • 4) Difference dollar amount • You can perform the following functions with the list of differences: • 1) Enter, change, display count • 2) Post difference • 3) Display or change document • 4) Recount document or item

33. Physical Inventory Status of an Item

34. Posting of Inventory Differences You can post the inventory differences either via the list of differences or via separate transactions. When an inventory difference is posted, the system creates a material document that corrects the stock figures, and an accounting document recording the necessary account movements. If a document exceeds the document tolerance defined for the user group, a user who is assigned to this physical inventory tolerance group may not post an inventory difference for this document. If the total value of the document lies below the document tolerance, but certain items exceed the maximum amount per item, the user may not post the differences for these items. User can process the other items. Figure 260

35. Posting of Inventory Differences Figure 260

36. Global Bike, Inc. WM Organizational Structure

37. Outbound Delivery Status 1: Outbound delivery created OPS: Overall Pick status; WM: Overall WM status; C: Pick status; GM: Total gds mvt status; BS: Billing status; TS: Trns Plan status; POD S: Proof of delivery status

38. Outbound Delivery Status 2: after Transfer order created

39. Goods Issue Process for Outbound Delivery – Transfer order

40. Outbound Delivery Status 3: after Transfer order confirmed

41. Outbound Delivery Status 4: after goods issued

42. Outbound Delivery Status 4: after Billing

43. WM Multiple Choice Question Name: ________________________ How can you assign organizational levels in SAP Warehouse Management? Please choose the correct answer. (One correct answer) a) O You can assign a plant-storage location and a storage area combination to one warehouse number. b) O You can assign several plant-storage location combinations to one warehouse number. c) O You can assign the plant-storage location combination to several shipping points. d) O You can assign a plant-storage location to multiple warehouse numbers.

44. Exercises: (Due Date 10/17/2015) Case Study 3: Process outbound delivery 1. Create sales order 2. Display materials inventory 3. Create outbound delivery 4. Display material inventory 5. Pick materials with transfer order 6. Run Bin status report 7. Confirm transfer order 8. Run bin status report 9. Display materials inventory value 10. Ship material 11. Display materials inventory • Display materials inventory Value • Create invoice • Receive payment